Determination of 1,3-benzodioxanes in Piper mullesua by high-performance thin-layer chromatography

A new, simple, precise, and rapid high-performance thin-layer chromatographic method was developed for the determination of 6 benzodioxanes in Piper mullesua extract: 1',3'-benzodioxole-5'-(2,4,8-triene-isobutyl nonanoate), 1',3'-benzodioxole-5'-(2,4,12-triene-isobutyl tridecanoate), fargesin, sesamin, asarinin, 1',3'-benzodioxole-5'-(2,4,8-triene-methyl nonanoate). The ingredients were separated on a precoated Silica Gel 60 F254 plate with a solvent system of toluene-acetone (92 + 8). The 6 benzodioxanes were well separated and easily identified in this chromatographic system. The separated benzodioxanes were visualized by color development with a spray reagent consisting of 1 g vanillin dissolved in 100 mL H2SO4-ethanol (5 + 95, v/v). Quantitation was performed by scanning the spots and comparing the integrated areas of compounds in samples with those of standards. Recoveries from samples spiked with known amounts of the benzodioxanes were excellent. The results were comparable with those estimated by liquid chromatography.     

Electric field gradients in various chemical environments of133Ba by the sum peak method

The sum peak at 437 keV (356+81 keV) has been measured in various chemical and physico-chemical environments. The fact that the intensity ratio of the sum peak to its single peak changes with the circumstances in which the radioactive source is placed is used to observe the effect of the chemical environment on directional correlation coefficients of 351–81 keV cascade in¹³³Ba−¹³³Cs decay and to detect the variations in the electric field gradient in different barium compounds. The sum peak method has been found to be useful in describing the chemical influences onG ₂₂ parameters and hence in the study of electric field gradients.     

Role of dimethyl sulfoxide as a solvent for vinyl polymerization

Dimethyl sulfoxide has been used as a solvent in the polymerization of methyl methacrylate and styrene. The chain-transfer coefficients of the solvent and the values of δ [i.e., (2k_t)^1/2/k_p] in solvent-monomer mixtures of various compositions were determined. δ was observed to be dependent on the solvent concentration in the case of methyl methacrylate but remained constant in case of styrene. The lowering of the values of δ with increasing solvent concentration in case of methyl methacrylate has been attributed to an interaction between the solvent and poly(methyl methacrylate) radical resulting in lower termination rate.     

Application of the sum peak method to study changes in the K-capture probability to the 1086 keV level and perturbed angular correlation parameters in the decay of152Eu

The sum peak method has been applied to electron capture probability changes to the 1086 keV level in the decay of¹⁵²Eu in the different environments, e.g. ethylenediaminetetraacetic acid (EDTA), bovine serum albumin (BSA) and hydrochloric acid (HCl). An attempt is also made to determine the effect of chemical environment on the directional correlation coefficient of the 1409–122 keV - cascade in¹⁵²Eu ¹⁵²Sm decay. A change of G₂₂ is found in the different chemical forms.     

Heat-resistant polymers from melt-processable bisimido-bisphthalonitriles

Heat-resistant polymers which are processable into void-free components and suitable for composite applications have been synthesized by thermal/chemical polymerization of four newly developed bisimido-bisphthalonitriles containing silicon, ether, carbonyl, and hexafluoroisopropylidene groups. Thermal polymerization involving addition reactions was performed at 200–275°C for 2–10 h and then post-curing at 310°C for 10 h. Polymers VI, VII, VIII , and IX were obtained. The thermal polymerization was monitored using infrared spectroscopy. Thermal polymerization was also carried out in the presence of an aromatic diamine. A polyhexasocyclane ( V ) was synthesized by condensation polymerization of ether containing bisimido-bisphthalonitrile with 4,4′-diaminodiphenyl ether in solvent phenol. The synthesized polymers were evaluated for thermal stability using dynamic thermogravimetric analysis (TGA). Polymers VII, VIII, IX , and X showed thermal decomposition temperature in the range of 475–500°C in nitrogen and air atmosphere. The char yield of the polymers was in the range of 60–69% in nitrogen at 800°C. This study indicated that synthesized thermosetting polymers from ether and keto containing bisimido-bisphthalo-nitrile are potential candidates for development of graphite composites. © 1993 John Wiley & Sons, Inc.     

Time-resolved spectroscopy of solid poly(1-vinyl naphthalene)following electron beam pulse radiolysis: pulse radiolytic studies on polymers

Transient emission studies following pulse radiolysis of solid poly(1-vinyl naphthalene) show existence of excited monomers and two excimers. Quenching experiments indicate that excimers are not formed directly by recombination of ions but probably by trapping of migrating monomeric excitation in performed traps whose density is approximately one in 10³.     

Synthesis and spectral characterization of some oxo-centered,trinuclear mixed-valence iron thiocarboxylates

Some mixed-valence Fe(II) Fe(III) complexes of thiocarboxylic acids and straight chain fatty acids with general formula [Fe(II)Fe(III)(2)O(SOCR)(6)(H(2)O)(3)] and [Fe(II)Fe(III)(2)O(SOCR)(3)(OOCR')(3)(CH(3)OH)(3)] (where, R=CH(3) or C(6)H(5) and R'=C(13)H(27), C(15)H(31) or C(17)H(35)) were synthesized and characterized by elemental analyses, spectral (infrared, electronic and M?ssbauer) studies, molar conductance and magnetic susceptibility measurements. The infrared spectra suggested bridging nature of carboxylate and thiocarboxylate anions along with upsilon(asym)(Fe(3)O) vibrations in the complexes. M?ssbauer studies revealed two resolved quadrupole doublets at 120-315 K confirming the presence of Fe(II) and Fe(III) moieties in the complexes. This was supported by the observed electronic spectral bands in the complexes at room temperature. The spectrum showed a band at around 13,800 cm(-1) which indicated an intervalence-transfer. Magnetic susceptibility measurements showed weak antiferromagnetic coupling related to mixed-valence pairs with S(2)=2, em leader S(1)=S(3)=5/2 spin exchange model. Conductance data indicated, the complexes were non-electrolytes in nitrobenzene. A structure has been established on the basis of these studies.     

Characterization of oligosaccharide moieties of intact glycoproteins by microwave-assisted partial acid hydrolysis and mass spectrometry

A method, which utilizes microwave-assisted partial acid hydrolysis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS), to elucidate oligosaccharide composition of intact glycoproteins is presented here. Glycoproteins, such as ribonuclease B, avidin, alpha1-acid glycoprotein, and fetuin, are used as model systems to demonstrate this technique. Partial cleavage of oligosaccharides from whole intact glycoproteins with trifluoroacetic acid was observed after a short exposure to microwaves. Due to the high-resolution mass spectra obtained by MALDI-TOFMS from glycoproteins with molecular weights less than 20 kDa, the compositions of oligosaccharides are readily derived for ribonuclease B and avidin. The data agree with the proposed oligosaccharide structures of ribonuclease B (five glycoforms) and avidin (eight glycoforms). Larger glycoproteins such as alpha1-acid glycoprotein (many glycoforms) and fetuin (many glycoforms) exhibited only broad peaks with no glycoform resolution. Nevertheless, this method can be used successfully for analysis of glycoproteins with molecular weights greater than 20 kDa to determine the presence or absence of glycosylation.     

An investigation of the properties of poly(dimethylsiloxane)-bioinspired silica hybrids

Elastomers typically require the incorporation of reinforcing fillers in order to improve their mechanical properties. For commercial silicone systems silica and titania are typically used as fillers. Fumed and precipitated silica are made on an industrial scale for many applications; however, we have shown recently that biological and synthetic macromolecules can generate new silica structures using a bioinspired route. Herein we have incorporated bioinspired silica fillers into poly(dimethylsiloxane) (PDMS) elastomers and investigated their mechanical, morphological and thermal properties as a function of filler loading. The equilibrium stress-strain characteristics of the PDMS-bioinspired silica hybrids were determined as a function of bioinspired filler loading and the Mooney-Rivlin constants (2C₁ and 2C₂) were calculated. The thermal characteristics, in particular glass transition temperatures (T_g) and melting points (T_m), of the PDMS-bioinspired silica hybrids were characterized using differential scanning calorimetry (DSC). The thermal stability of these hybrid materials were investigated using thermogravimetric analysis (TGA). The morphology of the samples was characterized using scanning electron microscopy (SEM), and the filler dispersion was characterized using ultra small angle X-ray scattering (USAXS) and scanning electron microscopy (SEM). Although spherical silica particles were used here, we have demonstrated elsewhere that this bioinspired synthetic route also enables highly asymmetric silica structures to be prepared such as fibres and sheets. This methodology therefore offers the interesting possibility of preparing new hybrid systems where the properties are highly anisotropic.     

Reversibly soluble macroaffinity ligand in aqueous two-phase separation of enzymes

Use of alginate as a free bioligand incorporated in an aqueous two-phase system of polyethylene glycol 6000-salt resulted in considerable purification of wheat germ alpha-amylase and sweet potato beta-amylase from their crude extracts. The elution of the enzyme from the free bioligand was facilitated by exploiting the fact that alginate can be reversibly precipitated in the presence of Ca2+. alpha-Amylase could be purified 42-fold with 92% activity recovery. beta-Amylase on the other hand could be purified 43-fold with 90% recovery. Both purified enzymes showed a single band on sodium dodecylsulfate-polyacrylamide gel electrophoresis.