Optimisation of analytical procedures for the quantification of ionic and carbonaceous fractions in the atmospheric aerosol and applications to ambient samples

In the last decade, our research group set up and optimised analytical techniques for the characterisation of the major components of atmospheric aerosol (i.e. secondary inorganic ions and carbonaceous material) and source markers (e.g. levoglucosan, carbonates). In this study, we present a complete overview on the most problematic aspects that can be encountered during the quantification of the two main components of aerosol, i.e. the ionic and carbonaceous fractions. More in detail, different liquid chromatographic approaches were set up for main ions and anhydrosugars determination. Quality assurance procedures (i.e. tests on data reliability) were applied during the set-up phase and they are presented in this work. As regards the carbonaceous component characterisation, two evolved gas analysis techniques were set up and applied: the thermogravimetric technique coupled to the Fourier transformed infrared spectroscopy (TGA/FTIR) and the thermal–optical transmittance method (TOT). A suitable protocol for organic and elemental carbon separation was set up for the TGA/FTIR system and a comparison with the results obtained by the TOT method was carried out. Studies on the impact of filter load, field blanks, and sample composition on OC/EC quantification by the TOT method were performed. Moreover, approaches for carbonate carbon quantification on different kinds of filters were developed. It was demonstrated that this approach allows to reach the ionic balance in samples impacted by carbonate compounds. The optimised methods have been applied for the analysis of thousands of PM filters allowing the obtainment of reliable results.     

Amoxicillin removal from aqueous matrices by sorption with almond shell ashes

The adsorption of the antibiotic amoxicillin at low concentration levels (µg?L^?1 order) from aqueous solution on almond shell ashes has been investigated, either by kinetic or equilibrium assays. The effect of the adsorbent amount, initial concentration of the antibiotic, particle diameter (d_p) and temperature were considered to evaluate the adsorption capacity of the adsorbent. The results showed that amoxicillin sorption is dependent on these four factors. The adsorption process was relatively fast and equilibrium was established in about 12 hours. The optimum parameters for an initial concentration of 450?µg?L^?1 were 50?mg of adsorbent, 303?K and d_p?<?600?µm. A comparison of kinetic models showed that pseudo-second order kinetics provides the best correlation of the experimental data. Isotherm data adjusted better to Langmuir equation, with an adsorption capacity of 2.5?±?0.1?mg?g^?1 at 303?K. The desorption process was also evaluated (maximum efficiency of 5%). Thermodynamic parameters were calculated and the negative value of ΔH⁰ and ΔG⁰ showed that adsorption was exothermic and a spontaneous process.     

Response surface optimisation applied to a headspace-solid phase microextraction-gas chromatography-mass spectrometry method for the analysis of volatile organic compounds in water matrices

A new method for the simultaneous determination of 12 volatile organic compounds (trans-1,2-dichloroethene, 1,1,1-trichloroethane, benzene, 1,2-dichloroethane, trichloroethene, toluene, 1,1,2-trichloroethane, tetrachloroethene, ethylbenzene, m-, p-, o-xylene) in water samples by headspace solid phase microextraction (HS–SPME)–gas chromatography mass spectrometry (GC–MS) was described, using a 100?µm PDMS (polydimethylsiloxane) coated fibre. The response surface methodology was used to optimise the effect of the extraction time and temperature, as well as the influence of the salt addition in the extraction process. Optimal conditions were extraction time and temperature of 30?min and ?20°C, respectively, and NaCl concentration of 4?mol?L^?1. The detection limits were in the range of 1.1?×?10^?3–2.3?µg?L^?1 for the 12 volatile organic compounds (VOCs). Global uncertainties were in the range of 4–68%, when concentrations decrease from 250?µg?L^?1 down to the limits of quantification. The method proved adequate to detect VOCs in six river samples.     

New synthetic methods for 2,3-diarylacridin-9(10H)-one and (E)-2-aryl-4-styrylfuro[3,2-c]quinoline derivatives

Two new synthetic methodologies for 2,3-diarylacridin-9(10H)-ones were developed. The first one involves the Heck reaction of (E)-3-iodo-2-styrylquinolin-4(1H)-ones with styrenes, leading to (E,E)-2,3-distyrylquinolin-4(1H)-ones, which when heated at high temperatures cyclize in two different ways. Electrocyclization and further in situ oxidation leads to 2,3-diarylacridin-9(10H)-ones, while tautomerization, cyclization by nucleophilic addition and further in situ oxidation produces (E)-2-aryl-4-styrylfuro[3,2-c]quinolines as the main compound. The second method gives only 2,3-diaryl-10-methylacridin-9(10H)-ones and involves the Heck reaction of (E)-3-iodo-1-methyl-2-styrylquinolin-4(1H)-ones and styrenes, leading to (E,E)-1-methyl-2,3-distyrylquinolin-4(1H)-ones, which when heated at high temperatures cyclize through electrocyclization and oxidation processes affording the expected compounds. The structures of all new compounds were established by extensive NMR studies.     

Total Diet Study: Mg and Mn content estimation of a Market Basket of São Paulo state (Brazil) by Instrumental Neutron Activation

Total Diet Studies (TDS) have been carried out to estimate dietary intakes of the essential and toxic elements for a large-scale population over a specific period of time. In this study, the TDS was based on the evaluation of food representing a Market Basket (MB), which reflected the dietary habits of the São Paulo State population, corresponding to 72 % of the average food consumption for the state of São Paulo. In the present Total Diet Study, magnesium and manganese concentrations were determined in 30 of the most consumed food groups of a MB of São Paulo State, Brazil. Instrumental Neutron Activation Analysis (INAA) has been successfully used on a regularly basis in several areas of nutrition and foodstuffs. Element concentrations were determined by INAA in freeze-dried samples and ranged in mg kg^?1. Mg 41.4 (fats)–5287 (coffee) and Mn 0.12 (prime grade beef)–32.9 (coffee). The average daily Mg and Mn intake was calculated by multiplying the concentration of each element in each table-ready food group by the respective weight (g day^?1) of the food group in the MB and adding the products from all food groups. The results of daily dietary intakes in this study were: Mg 174.8 and Mn 1.34 mg day^?1. Theses values were lower than the adequate intake (AI) proposed by the Food and Nutrition Board of the Institute of Medicine (USA National Academy) for adults. The low levels of Mg and Mn intakes presented in this TDS are probably due to the fact that MB of this study represented only 72 % of the weight of the most consumed household foods of São Paulo State.     

Evaluation of As,Se and Zn in octopus samples in different points of sales of the distribution chain in Brazil

Three CRMs of different matrix composition were analysed, representing an environmental matrix sample (BCR–320R Channel Sediment), a botanical matrix sample (SRM 1547 Peach Leaves) and a zoological matrix sample (SRM 1566b Oyster Tissue). The element mass fractions were obtained using the KayWin program. Analytical measurement uncertainty was determined by two approaches: (1) the routine procedure applying combination of the overall uncertainty u(m) = 3.5 % and statistical uncertainty of the peak area determination and (2) the procedure applying the dedicated ERON program for calculating uncertainty. Performance of altogether 31 certified values was tested by means of calculating E _n numbers. For the remaining 52 non-certified values, comparison between uncertainties obtained by the two approaches was made. When using the first approach, the E _n number showed satisfactory performance in 28 cases; by using the second approach, the E _n number showed satisfactory performance in 27 cases. None of the unsatisfactory performances (E _n  > 1) appeared to be of systematic nature. The uncertainties obtained by applying the two approaches revealed a big extent of consistency. As the present nuclear database lacks lot of data that serve as input to the ERON program, in particular uncertainties of Q ₀ factors, estimates need to be introduced for the missing values, emphasising the urgent need to upgrade the database with missing data.     

Using Design of Experiments to Optimize a Screening Analytical Methodology Based on Solid-Phase Microextraction/Gas Chromatography for the Determination of Volatile Methylsiloxanes in Water

Volatile methylsiloxanes (VMSs) constitute a group of compounds used in a great variety of products, particularly personal care products. Due to their massive use, they are continually discharged into wastewater treatment plants and are increasingly being detected in wastewater and in the environment at low concentrations. The aim of this work was to develop and validate a fast and reliable methodology to screen seven VMSs in water samples, by headspace solid-phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The influence of several factors affecting the extraction efficiency was investigated using a design of experiments approach. The main factors were selected (fiber type, sample volume, ionic strength, extraction and desorption time, extraction and desorption temperature) and optimized, employing a central composite design. The optimal conditions were: 65 µm PDMS/Divinylbenzene fiber, 10 mL sample, 19.5% NaCl, 39 min extraction time, 10 min desorption time, and 33 °C and 240 °C as extraction and desorption temperature, respectively. The methodology was successfully validated, showing low detection limits (up to 24 ng/L), good precision (relative standard deviations below 15%), and accuracy ranging from 62% to 104% in wastewater, tap, and river water samples.     

Novel purine conjugates with N-heterocycles: synthesis and anti-influenza activity

Chemistry of Heterocyclic Compounds - A number of novel amides were synthesized by coupling of 6-[(9H-purin-6-yl)amino]hexanoic acid to heterocyclic amines. The antiviral activity of the obtained...     

Antimicrobial properties of viscose yarns ring-spun with integrated amino-functionalized nanocellulose

Cellulose - Bio-based, renewable and biodegradable products with multifunctional properties are also becoming basic trends in the textile sector. In this frame, cellulose nanofibrils (CNFs) have...     

Evaluation of stability of silica-supported Fe–Pd and Fe–Pt nanoparticles in aerobic conditions using thermal analysis

The applications of zerovalent iron nanoparticles (nZVI) exploit their high reactivity which decreases due to oxidation in aerobic conditions during manufacture, application, and storage. In this study, we present the new procedure for estimation of the nZVI stability to oxidation in air. The procedure is suitable for characterization of the novel materials based on the supported nZVI. Nanoscale particles were synthesized inside porous silica supports by incipient wetness impregnation with the metal precursor solutions followed by thermal treatment. The TG–DTA studies revealed the decomposition temperature of the supported precursors, as well as the interaction of Fe and precious metal precursors, which resulted in the formation of alloy nanoparticles. Characterization of the samples by XRD confirmed the formation of the nanoparticles of the metallic Pd, Pt, and Fe phases supported on SiO₂ carriers, as well as the formation of solid solutions based on the structure of precious metals. The new procedure for estimation of the nZVI stability included (1) TPR with hydrogen up to 400–425 °C followed by isothermal reduction at these temperatures; (2) in situ reoxidation with oxygen at room temperature. The samples were reduced “as obtained” and after in situ reoxidation. The results of the TPR studies exhibited that introduction of both Pd and Pt protected the Fe nanoparticles from oxidation with oxygen and air at ambient conditions.