CuI-catalyzed tandem synthesis of thioethers using aryl halides,electron-deficient alkenes,and sodium iso-propyl xanthogenate

A ligand-free, CuI-catalyzed protocol was developed for the one-step preparation of Michael adducts of aromatic thiols in high yields by reacting a mixture of an aryl halide and an electron-deficient alkene with sodium iso-propyl xanthogenate.     

Application of titanium nanoparticles containing natural compounds in cutaneous wound healing

The aim of the study was the rapid green synthesis of titanium nanoparticles using the aqueous extract of Falcaria vulgaris leaves (TiNPs@FV) and exploring their antioxidant, cytotoxicity, antifungal, antibacterial, and cutaneous wound healing activities under in vitro and in vivo condition. These nanoparticles were characterized by UV-Vis, Fourier transform-infrared(FT-IR), X-ray diffraction XRD), field emission-scanning electron microscopy FE-SEM), and transmission electron microscopy TEM) analyses. The synthesized TiNPs@FV had great cell viability on human umbilical vein endothelial cells and indicted this method was nontoxic. DPPH (2,2-diphenyl-1-picrylhydrazyl) test revealed similar antioxidant potentials for F. vulgaris, TiNPs@FV, and butylated hydroxytoluene. All data of antibacterial, antifungal, and cutaneous wound healing tests were analyzed by SPSS 22 software. In the antimicrobial part of this study, TiNPs@FV indicated higher antifungal and antibacterial effects than all standard antibiotics (p ≤ 0.01). Minimal inhibitory concentration (MIC) and minimal fungicidal concentration of TiNPs@FV against all fungi were at 2–4 mg/mL and 2-8 mg/mL ranges, respectively. But, MIC and minimal bactericidal concentration of TiNPs@FV against all bacteria were at 2-8 mg/mL and 2-16 mg/mL ranges, respectively. In the part of cutaneous wound healing, use of TiNPs@FV ointment significantly (p ≤ 0.01) raised the wound contracture, vessel, hydroxyl proline, hexuronic acid, hexosamine, fibrocyte, and fibrocytes/fibroblast rate and significantly (p ≤ 0.01) decreased the wound area, total cells, neutrophil, and lymphocyte compared to other groups in rats. The results of FT-IR, UV-Vis, XRD, TEM, and FE-SEM confirm that the aqueous extract of F. vulgaris leaves can be used to yield titanium nanoparticles with a notable amount of remedial effects.     

Synthesis and characterization of novel ferrocenyl glycidyl ether polymer,ferrocenyl poly (epichlorohydrin) and ferrocenyl poly (glycidyl azide)

Poly (ferrocenyl glycidyl ether) was synthesized by polymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane (FcEpo) using toluene solution of methylaluminoxane as the catalyst. Copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin was used for the synthesis of another ferrocenyl based poly (epichlorohydrin). Ferrocenyl based poly (glycidyl azide), GAP, was synthesized by treatment of sodium azide with this copolymer in DMF as solvent at room temperature. The synthesized ferrocenyl based polymers were characterized by FT-IR, ¹HNMR, UV–Vis, TGA, DSC and GPC analysis. The UV–Vis spectra of synthesized polymers show the absorption band of ferrocene moiety at about 450 nm. The TGA and DSC analysis show that poly (ferrocenyl glycidyl ether) has good thermal stability. The TGA analysis shows that the copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin improved the thermal stability of the copolymer. The GPC analysis of poly (ferrocenyl glycidyl ether), ferrocenyl based poly (epichlorohydrin) and Ferrocenyl based poly (glycidyl azide) show the PDI between 1.14–1.17. The electrochemical behavior of synthesized polymers was investigated by cyclic voltammetry (CV) measurements. The CV curves of synthesized polymers show good electrochemical performance and there is one redox system with the single-electron reversible reaction that associated with ferrocene moiety in polymers structure. The anodic and cathodic peak currents increased with scan rate confirmed redox reactions in the system are kinetically fast diffusion-controlled reactions.     

A ternary hybrid system based on combination of mesoporous silica,heteropolyacid and double-layered clay: an efficient catalyst for the synthesis of 2,4-dihydro-3H-pyrazol-3-ones and pyranopyrazoles in aqueous medium: studying the effect of the synthetic procedure on the catalytic activity

Research on Chemical Intermediates - SBA/hydrotalcite/heteropolyacid nanocomposite is synthesized via a novel procedure in which the as-prepared heteropolyacid-loaded SBA-15 was impregnated with...     

CuI-catalyzed thioarylation of active methylene compounds with in situ generated benzenethiols: Preparation of α-thioaryl-β-dicarbonyls and 4-thioaryl-5-pyrazolones

In this paper, a one-step copper-catalyzed procedure for oxidative coupling of active methylene compounds including cyclic β-diketones, cyclic β-ketoesters and 5-pyrazolone with benzenethiols is described. Benzenethiols are in situ generated in the reaction mixture from aryl halides and thiourea as sulfur transfer reagent. α-Thioaryl compounds are obtained in excellent yields and in short reaction time via the process which is free from the foul smell of thiols.     

Deferiprone solubility in some non-aqueous mono-solvents at different temperatures: experimental data and thermodynamic modelling

The solubility of deferiprone (DFP) in five organic solvents including ethyl acetate, chloroform, acetonitrile, 1,4-dioxane and dichloromethane was investigated by the flask-shake method under atmospheric pressure at temperatures ranging from 293.15 to 313.15 K. In general, the solubility (mol L^–1) obeyed the following order from high to low in different mono-solvents: dichloromethane > chloroform > acetonitrile > 1,4-dioxane > ethyl acetate. The solubility of DFP in the mono-solvents increased with a rise of temperature. The solubility data were successfully correlated with the van’t Hoff equation. The generated data in this work and the previously published data were used to calculate the thermodynamic parameters of the system using the modified van’t Hoff equation, and the derived thermodynamic properties were correlated using Abraham solvation parameters.     

Structure elucidation,DNA binding,DFT, molecular docking and cytotoxic activity studies on novel single crystal (E)-1-(2-fluorobenzylidene)thiosemicarbazide

Compound 3 {(E)-1-(2-fluorobenzylidene)thiosemicarbazide} – a new Schiff base of thiosemicarbazide has been synthesized, characterized and reported for crystal structure. Planer side chain in the crystal structure was observed co-planer with aromatic ring plane and molecules were connected into centrosymmetric dimmers via intermolecular hydrogen bonding. DFT geometry optimization and the relevant quantum parameters indicated unstable and reactive nature of compound 3. Experimental and theoretical findings for DNA binding by UV–visible, cyclic voltammetry and molecular docking studies showed consistency in kinetic (K_b) and thermodynamic (ΔG) parameters and that compound 3 significantly interacted with DNA via intercalation. Viscometric analysis further comprehended intercalation as possible binding mode of the compound with DNA and non-denaturing of DNA in the presence of 10% aqueous DMSO. Docked parameters further assured the drug like characteristics of the investigated compound as fit in Lipinski’s criteria. Dose dependant cytotoxic activity of compound 3 against human Huh-7 cell line indicated its anti-cancer potential at 100?µg/ml concentration.     

Microkinetic simulations of the oxidation of CO on Pd based nanocatalysis: a model including co-dependent support interactions

The catalysed oxidation of CO using mass-selected Pd(13) clusters supported on thin MgO films was modelled using a microkinetic simulation of the reaction. The model of the system includes reverse spill-over calculations which were intrinsically incorporated into the formulation of the kinetics. The spill-over model is based on a capture-zone approach including a co-dependence on the variables of the kinetic equations. The experimental values were determined using dual pulsed-molecular beam measurements and recorded at a range of temperatures. The experiment allowed the turn-over frequency and reaction probability to be determined as a function of mole fraction. Comparison of the kinetic model with the experimental data gives excellent agreement and strongly highlights the importance of substrate effects. In particular, the origin of the low temperature catalysis of the Pd clusters is elucidated. The model allows the mole fraction and temperature dependent values such as the sticking coefficients for these clusters to be predicted.     

Indirect Determination of Trace Copper(II) by Adsorptive Stripping Voltammetry with Zincon at a Carbon Paste Electrode

Traces of copper(II) can be determined by adsorptive stripping voltammetry using 2‐carboxy‐2′‐hydroxy‐5′‐sulfoformazyl benzene (Zincon) as complex forming reagent. First in phosphate buffer pH 6.4, copper(II)‐Zincon complex was adsorbed on carbon paste electrode (CPE) with an accumulation potential of 0.6 V. Following this, adsorbed complex was oxidized and detected by differential pulse voltammetric (DPV) scan from 0.6 to 1.0 V. The effective parameters in sensor response were examined. The detection limit (DL) of copper(II) was 1.1 μg/L and relative standard deviations (RSDs) for 10 and 200 μg/L Cu(II) were 1.81 and 1.03%, respectively. The calibration curve was linear for 2–220 μg/L copper(II). The resulting CPE does not use mercury and therefore, has a positive environmental benefit. The method, which is reasonably sensitive and selective, has been successfully applied to the determination of trace amount of copper in water and human hair samples.     

Generation of Haploid Spermatids on Silk Fibroin-Alginate-Laminin-Based Porous 3D Scaffolds

In vitro production of sperm is a desirable idea for fertility preservation in azoospermic men and prepubertal boys suffering from cancer. In this study, a biocompatible porous scaffold based on a triad mixture of silk fibroin (SF), alginate (Alg), and laminin (LM) is developed to facilitate the differentiation of mouse spermatogonia stem cells (SSCs). Following SF extraction, the content is analyzed by SDS-PAGE and stable porous 3D scaffolds are successfully prepared by merely Alg, SF, and a combination of Alg-SF, or Alg-SF-LM through freeze-drying. Then, the biomimetic scaffolds are characterized regarding the structural and biological properties, water absorption capacity, biocompatibility, biodegradability, and mechanical behavior. Neonatal mice testicular cells are seeded on three-dimensional scaffolds and their differentiation efficiency is evaluated using real-time PCR, flow cytometry, immunohistochemistry. Blend matrices showed uniform porous microstructures with interconnected networks, which maintained long-term stability and mechanical properties better than homogenous structures. Molecular analysis of the cells after 21 days of culture showed that the expression of differentiation-related proteins in cells that are developed in composite scaffolds is significantly higher than in other groups. The application of a composite system can lead to the differentiation of SSCs, paving the way for a novel infertility treatment landscape in the future.