Application of Monte Carlo simulation method to polymerization kinetics over Ziegler–Natta catalysts

In the current work, the Monte Carlo simulation method was applied to ethylene polymerization over Ziegler–Natta catalysts. As expected, polymerization over each center of a Ziegler–Natta catalyst leads to a polymer having a Schultz–Flory molecular weight distribution. Notwithstanding, the total molecular weight distribution obtained by all catalyst centers together is at least twice as broad as that of each center. As another interesting finding, the introduction of hydrogen to the reaction deactivates the catalyst active centers and thereby reduces the catalyst activity. Nevertheless, it does not mainly affect the polymerization kinetics. In addition, the polymer molecular weight falls as hydrogen is added to the reaction since it acts as a strong transfer agent. The same effect is seen when cocatalyst concentration increases. Hydrogen also widens the polymer molecular weight distribution. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 45–56, 2009     

Regioselective Synthesis of Para‐Bromo Aromatic Compounds

Reaction of substituted benzene rings with N‐bromophthalimide, under neutral conditions, gave the corresponding bromo derivatives with a preference for the formation of the para bromo isomer over the ortho isomer. The simple work‐up procedure minimizes loss of product and the yields are good.     

From inflation to acceleration,with phantom and canonical scalar fields in non-flat universe

Motivated by the recent work of Elizalde et al. [E. Elizalde, S. Nojiri, S.D. Odintsov, D. Saez–Gomez, V. Faraoni, Phys. Rev. D 77 (2008) 106005], we generalize their work to the non-flat case. We consider a universe filled with matter and show that it is possible to obtain both inflation and accelerated expansion at late times by using a single scalar field. Realistic examples are worked out in order to illustrate this fact. Then we extend the problem to the interacting case.     

Design of plasmonic nanoantennae for enhancing spontaneous emission

We apply two- and three-dimensional numerical calculations to study optical nanoantennae made of two coupled gold nanostructures, enclosing a single emitter in their gap. We show that, using structures manufacturable with today's nanotechnology, it is possible to increase the radiative decay rate by three orders of magnitude while keeping a quantum efficiency larger than 80% in the near-infrared regime. We examine the competition between the radiative and nonradiative processes in the presence of the antennae as a function of wavelength and antenna geometry. Our results hold great promise for improving the quantum efficiency of poor emitters such as silicon nanocrystals or carbon nanotubes.     

Novel nanocomposite membranes prepared with PVC/ABS and silica nanoparticles for C<Subscript>2</Subscript>H<Subscript>6</Subscript>/CH<Subscript>4</Subscript> separation

Composite membranes based on polyvinyl chloride and acrylonitrile butadiene styrene (ABS) copolymer have been prepared and then filled with 2–8 wt % of silica nanoparticles. Membranes were fabricated by solution casting method using dimethylacetamide. The performance of prepared membranes were studied for methane and ethane at the feed pressure of 1.0, 1.5, 2.0, and 3.0 bar at 35°C. By increasing the percentage of ABS, permeability of methane and ethane increased. In addition, by adding the silica nanoparticles in the membrane, permeability of gas increased in all cases. The highest gas pair selectivity for C₂H₆/CH₄ could be obtained from PVC/BS (20 wt %) which loaded with 8 wt % of silica nanoparticles. The results of this study suggest that high performance gas separation nanocomposite membranes can be attained by adopting a judicious combination of blending technique for polymeric membrane, optimized loading percentage, and feed operating conditions.     

Response surface optimization of heterogeneous Fenton-like degradation of sulfasalazine using Fe-impregnated clinoptilolite nanorods prepared by Ar-plasma

Research on Chemical Intermediates - Optimization of sulfasalazine degradation using the heterogeneous Fenton-like process in batch mode was investigated by response surface methodology. The...     

Substituted six-membered ring carbenes: the effects of amino and cyclopropyl groups through DFT calculations

DFT calculations are employed to compare and contrast six-membered ring carbenes including 1,3-dimethyltetrahydropyrimidin-2-ylidene (1a), 1-methyl-3-cyclopropyltetrahydropyridine-2-ylidene (2a), and 1,3-dicyclopropylcyclohexane-2-ylidene (3a) as well as their unsaturated analogues 1b, 2b, 3b, and 2c. The amino groups exert singlet-triplet energy separation (?E_s−t) of 60.9 kcal/mol to 1a while cyclopropyls induce a ?E_s−t of 14.8 kcal/mol to 3a. The simultaneous presence of amino and cyclopropyl in 2a leads to a ?E_s−t of 43.3 kcal/mol. Unsaturation slightly increases the ?E_s−t of 1a and 3a but not that of 2a. Our thermodynamic, kinetic, and reactivity results are compared with those of synthetic five-membered ring N-heterocyclic carbenes.     

Role of Zr4+ cations in NO2 adsorption on Ce(1-x)Zr(x)O2 mixed oxides at ambient conditions

Mixed oxides Ce(1-x)Zr(x)O(2) prepared by slow coprecipitation in NaOH were tested for NO(2) adsorption in dynamic conditions at room temperature. The samples were characterized before and after exposure to NO(2) by XRD, N(2)-adsorption, thermal analysis, potentiometric titration, and FT-IR. Mixed oxides show a better NO(2) adsorption capacity than the parent materials (CeO(2) and Zr(OH)(4)). This effect is linked to the presence of reduced cerium and oxygen vacancies induced by the addition of Zr(4+) cations to the structure. The results indicate that NO(2) reacts with Ce(3+) to form nitrite and nitrate species on the surface. The NO retention increases with an increase in the Zr(OH)(4) content. A decrease in the density of -OH groups on the surface after the exposure to NO(2), suggests their involvement in reactive adsorption of NO and/or NO(2). From the structural point of view, no real difference was observed on the Ce(1-x)Zr(x)O(2) materials before and after exposure to NO(2).