Gold(I) N-heterocyclic carbene based initiators for bulk ring-opening polymerization of l-lactide

Synthesis, structures, and catalysis studies of gold(I) complexes of N-heterocyclic carbenes namely, a di-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene], a mono-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene] and a non-functionalized [1,3-di-i-propyl-benzimidazol-2-ylidene], are reported. Specifically, the gold complexes, [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene]AuCl (1c), [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene]AuCl (2c), and [1,3-di-i-propyl-benzimidazol-2-ylidene]AuCl (3b), were prepared from the respective silver complexes 1b, 2b, and 3a by treatment with (SMe₂)AuCl in good yields following the commonly used silver carbene transfer route. The silver complexes 1b, 2b, and 3a were synthesized from the respective imidazolium halide salts by the reactions with Ag₂O. The N-heterocyclic carbene precursors, 1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazolium chloride (1a) and 1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazolium chloride (2a), were synthesized by the direct reactions of cyclohexene oxide and imidazole with chloroacetophenone and benzyl chloride respectively. The gold (1c, 2c, and 3b) and the silver (3a) complexes along with a new O-functionalized imidazolium chloride salt (1a) have been structurally characterized by X-ray diffraction. The structural studies revealed that geometries around the metal centers were almost linear in these gold and silver complexes. The gold (1c, 2c, and 3b) complexes efficiently catalyze ring-opening polymerization (ROP) of l-lactide under solvent-free melt conditions producing polylactide polymer of moderate to low molecular weights with narrow molecular weight distributions.     

Pyridine derived N-heterocyclic germylenes: A density functional perspective

Three novel germanimines, 2-, 3-, and 4-germapyridines (1, 2, and 3, respectively) along with their isomeric germylenes, are compared and contrasted at B3LYP/AUG-cc-pVTZ//B3LYP/6-31+G^∗ level of theory. From a thermodynamic viewpoint, two germylenes out of a total of eight singlet minima, 1H-2-germapyridine-2-ylidene (1a) and 1H-4-germapyridine-4-ylidene (3a), are found 29.2 and 15.4 kcal/mol more stable than their corresponding aromatic germapyridine isomers, respectively. Indeed, 1a is the global minimum on the potential energy surface of cyclic C₄NGeH₅ with a singlet-triplet energy gap larger than that of Herrmann’s germylene, i.e. 57.4 vs. 49.7 kcal/mol. From a kinetic viewpoint, the calculated energy barrier for 1,2-H shift of 1a to 1 is 70.8 kcal/mol compared to more prohibitive 92.5 kcal/mol for 1,4-H shift of 3a to 3. No GeGe doubly bonded minimum structure is found as dimer for 1a. The doubly bonded dimer of 3a is 11.2 kcal/mol less stable than its two separate monomers. This study signifies the thermodynamic and kinetic stabilities of divalent 1a and 3a hoping to prompt the experimental attentions toward them.     

Density functional theory calculations and experimental parameters for mutarotation of 6-deoxy-l-mannopyranosyl hydrazine

The geometry and energy profiles of the mutarotation pathway present in the equilibrium of 6-deoxy-β-l-mannopyranosyl 2,4-dinitrophenylhydrazine (1a), 6-deoxy-l-mannose 2,4-dinitrophenylhydrazone (1b), and 6-deoxy-α-l-mannopyranosyl 2,4-dinitrophenylhydrazine (1c) were modeled by DFT calculations at B3LYP/6-31G(d) level affording ΔG_DFT=0.000 kcal/mol, ΔG_DFT=0.174 kcal/mol, and ΔG_DFT=3.411 kcal/mol, respectively. Experimentally, the β-l-pyranose 1a occurs in 50% followed by the acyclic structure 1b in 44% as well as by the α-l-anomer 1c in 6%. The conformations of 1a-c and their corresponding 2,3,4-triacetyl derivatives 2a-c were studied by molecular modeling and NMR spectroscopy. IR frequencies, NMR chemical shifts, and X-ray diffraction analysis were employed to compare theoretical with experimental structural parameters.     

Experimental and theoretical studies of a silver complex of O-functionalized N-heterocyclic carbene

Experimental and theoretical studies of a silver complex namely, [1-i-propyl-3-(2-oxo-2-t-butyl ethyl)imidazol-2-ylidene]AgCl (1b), supported over an O-functionalized N-heterocyclic carbene ligand are reported. Specifically, [1-i-propyl-3-(2-oxo-2-t-butyl ethyl)imidazol-2-ylidene]AgCl (1b) was synthesized by reaction of 1-i-propyl-3-(2-oxo-2-t-butyl ethyl)imidazolium chloride 1a with Ag₂O in 42% yield. The 1-i-propyl-3-(2-oxo-2-t-butyl ethyl)imidazolium chloride 1a was synthesized by the alkylation reaction of 1-i-propylimidazole with α-chloropinacolone in 70% yield. The molecular structures of 1a and 1b have been determined by X-ray diffraction. Detailed theoretical investigation has been performed using the density functional theory method with the B3LYP functional. Bonding in 1b has been probed with the help of charge decomposition analysis (CDA), atoms in molecule (AIM) approach as well as natural bond orbital (NBO) methods. The Ag-NHC bond has a dominantly covalent character with NHC acting as an effective σ-donor. The π-back-bonding from the metal to the ligand was found to be negligible.     

Silver N-heterocyclic carbene complexes as initiators for bulk ring-opening polymerization (ROP) of l-lactides

Synthetic, structural and catalysis studies of two silver complexes namely, {[1-(2,4,6-trimethylphenyl)-3-(N-phenylacetamido)imidazol-2-ylidene]₂Ag}⁺Cl⁻1b, supported over an amido-functionalized N-heterocyclic carbene ligand, and [1-(i-propyl)-3-(benzyl)imidazol-2-ylidene]AgCl 2b, supported over a non-functionalized N-heterocyclic carbene ligand, are reported. Specifically, 1b, a cationic complex bearing 2:1 NHC ligand to metal ratio, was obtained from the reaction of 1-(2,4,6-trimethylphenyl)-3-(N-phenylacetamido)imidazolium chloride 1a with Ag₂O in 52% yield. The corresponding 1a was synthesized by the alkylation reaction of 1-(2,4,6-trimethylphenylimidazole) with N-phenyl chloroacetamide in 73% yield. The other silver complex 2b, a neutral complex bearing 1:1 NHC ligand to metal ratio, was obtained from the reaction of 1-(i-propyl)-3-(benzyl)imidazolium chloride 2a with Ag₂O in 42% yield. The 2a was synthesized by the alkylation reaction of 1-(i-propylimidazole) with benzyl chloride in 45% yield. The molecular structures of the imidazolium chloride, 1a, and the silver complexes, 1b and 2b, have been determined by X-ray diffraction studies. The silver complexes, 1b and 2b, successfully catalyze bulk ring-opening polymerization (ROP) of l-lactides at elevated temperatures under solvent-free melt conditions producing moderate to low molecular weight polylactide polymers having narrow molecular weight distributions.     

An efficient synthesis of (E)-(2-arylpyrazino[1,2-a]pyrimidine-4-ylidene)acetonitriles and cyanomethyl appended pyrimidines

A series of (E)-(2-arylpyrazino[1,2-a]pyrimidine-4-ylidene)acetonitriles 5a-j and aryl/heteroaryl tethered pyrimidin-4-yl acetonitriles 6a-e has been synthesized in excellent yields through base catalyzed ring transformation of suitably functionalized 2H-pyran-2-ones 3 using 2-aminopyrazine 4a and arylamidinium salts 4b, separately.     

Synthesis, properties, and oxidizing function of 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates

Uracil-annulated heteroazulenes, 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates 7a,b·BF₄⁻, which are the isoelectronic compounds of 5-dezazaflavin, were synthesized. X-Ray crystal analysis and MO calculations were carried out to clarify the structural characteristics of 7a,b·BF₄⁻. The stability of cations 7a,b is expressed by the pK_R+ values which were determined spectrophotometrically to be 10.9 and 11.2, respectively. The electrochemical reduction of 7a,b exhibited high reduction potentials at −0.84 and −0.87 (V vs Ag/AgNO₃) upon cyclic voltammetry (CV). A good linear correlation between the pK_R+ values and reduction potentials (E1_red) of 7a,b·BF₄⁻ and reference compounds 4·BF₄⁻ and 5·BF₄⁻ was obtained. In a search of the reactivity, reactions of 7a,b·BF₄⁻ with some nucleophiles, hydride and diethylamine, were carried out to clarify that the introduction of nucleophiles to give regio-isomers is dependent on the nucleophile. The photo-induced oxidation reactions of 7a,b·BF₄⁻ toward some alcohols under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compounds 7a,b·BF₄⁻], suggesting the oxidizing function of 7a,b·BF₄⁻ toward alcohols in the autorecycling process.     

Thermal hydrosilylation of olefin with hydrosilane. Preparative and mechanistic aspects

The reaction of trichlorosilane (1a) at 250 °C with cycloalkenes, such as cyclopentene (2a), cyclohexene (2b), cycloheptene (2c), and cyclooctene (2d), gave cycloalkyltrichlorosilanes [C_nH_2n−1SiCl₃: n = 5 (3a), 6 (3b), 7 (3c), 8 (3d)] within 6 h in excellent yields (97-98%), but the similar reactions using methyldichlorosilane (1b) instead of 1a required a longer reaction time of 40 h and afforded cycloalkyl(methyl)dichlorosilanes [C_nH_2n−1SiMeCl₂: n = 5 (3e), 6 (3f), 7 (3g), 8 (3h)] in 88-92% yields with 4-8% recovery of reactant 2. In large (2, 0.29 mol)-scale preparations, the reactions of 2a and 2b with 1a (0.58 mol) under the same condition gave 3a and 3b in 95% and 94% isolated yields, respectively. The relative reactivity of four hydrosilanes [HSiCl_3−mMe_m: m = 0-3] in the reaction with 2a indicates that as the number of chlorine-substituent(s) on the silicon increases the rate of the reaction decreases in the following order: n = 3 > 2 > 1 ? 0. In the reaction with 1a, the relative reactivity of four cycloalkenes (ring size = 5-8) decreases in the following order: 2d > 2a > 2c > 2b. Meanwhile linear alkenes like 1-hexene undergo two reactions of self-isomerization and hydrosilylation with hydrosilane to give a mixture of the three isomers (1-, 2-, and 3-silylated hexanes). In this reaction, the reactivity of the terminal 1-hexene is higher than the internal 2- and 3-hexene. The redistribution of hydrosilane 1 and the polymerization of olefin 2 occurred rarely under the thermal reaction condition.     

Copper (I) 1,3-R2-3,4,5,6-tetrahydropyrimidin-2-ylidenes (R=mesityl, 2-propyl): synthesis, X-ray structures, immobilization and catalytic activity

The synthesis of novel copper (I) N-heterocyclic carbene complexes is described. Thus, reaction of CuX with 1,3-di(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene yields CuX(1,3-di(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) (X=Cl, (1a), Br (1b)); however, reaction of CuCl with 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene yields the bis-N-heterocylcic carbene complex Cu(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)₂⁺CuBr₂⁻ (2). A supported version of 1, i.e. PS-DVB-CH₂-OCO-CF₂-CF₂-CF₂-COOCu(1,3-di(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) (3) was prepared from 1 and PS-DVB-CH₂-OCO-CF₂-CF₂-CF₂-COOAg. A copper loading of 4.15 μmol/g was realized. The new compounds were used as catalysts in carbonyl hydrosilylation and cyanosilylation reactions. Excellent reactivity was observed, giving raise to turn-over numbers (TONs) of up to 100,000. Compounds 1a, 1b, and 2 have also been used as catalysts for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). A linear conversion of monomer with time was observed, however, no control over molecular weight of PMMA was observed.     

Dinuclear rhenium(I) carbonyl complexes based on π-conjugated polypyridyl ligands with tetrathiafulvalenes: Syntheses, crystal structures, properties and DFT calculations

A series of tetrathiafulvalene-substituted 2,3-di(2-pyridyl)quinoxaline (dpq) ligands, 2-(4,5-bis(methylthio)-1,3-dithiol-2-ylidene)-6,7-di(pyridin-2-yl)- [1,3]dithiolo[4,5-g]quinoxaline (L₁), dimethyl-2-(6,7-di(pyridin-2-yl)-[1,3]dithiolo[4,5-g]quinoxalin-2-ylidene)-1,3-dithiole-4,5-dicarboxylate (L₂), and 2-(5,6-dihydro-[1,3]dithiolo[4,5-b] [1,4]dithiin-2-ylidene)-6,7-di(pyridin-2-yl)-[1,3]dithiolo[4,5-g]quinoxaline (L₃), have been prepared. Reactions of these ligands with Re(CO)₅Cl afford the corresponding dinuclear rhenium(I) carbonyl complexes, Re₂(L)(CO)₆Cl₂ (L = L₁, 5a; L = L₂, 5b; L = L₃, 5c). All new compounds are fully characterized by ¹H NMR, IR and mass spectroscopies. The crystal structures of 5a and 5b have been studied. Optimized conformations and molecular orbital diagrams of 5a−5c have been calculated with density functional theory (DFT). The spin-allowed singlet−singlet electronic transitions of all complexes have been calculated with time-dependent DFT (TDDFT), and the UV-Vis−NIR spectra are discussed based on the theoretical calculations.     

Ruthenium vinylidene and carbyne complexes containing a multifunctional tridentate ligand with a PNN donor set

The neutral, octahedral ruthenium vinylidene complexes mer,trans-[(PNN)Cl₂Ru(CCHR)] (PNN = N-(2-diphenylphosphinobenzylidene)-2-(2-pyridyl)ethylamine; R = Ph, 1a; R = ^tBu, 1b) are reported. An X-ray crystallographic study of 1a confirms the tridentate, meridional coordination mode of the PNN ligand. Compounds 1a and 1b undergo regioselective electrophilic addition with HBF₄ · Et₂O at C_β of the vinylidene ligand at low temperatures, and are cleanly and quantitatively converted to the ruthenium carbynes mer,trans-[(PNN)Cl₂Ru(CCH₂R)][BF₄] (R = Ph, 2a; R = ^tBu, 2b). Carbynes 2a and 2b are stable only at low temperatures (<−50 °C). Complex 1a undergoes ligand substitution with L to yield mer,trans-[(PNN)Cl₂Ru(L)] (L = MeCN, 3a; L = CO, 3b).     

Hydrogen-bonded networks from η-semiquinone complexes of manganese tricarbonyl

The cationic manganese tricarbonyl complexes containing η⁶-2-methylhydroquinone (2a), η⁶-2,3-dimethylhydroquinone (3a), η⁶-2-t-butylhydroquinone (4a), η⁶-tetramethylhydroquinone (5a) and η⁶-4,4′-biphenol (6a) are readily deprotonated to the corresponding neutral (η⁵-semiquinone)Mn(CO)₃ (2b-6b) and anionic (η⁴-quinone)Mn(CO)₃⁻ (2c-5c) complexes. The X-ray structures of 2b-6b feature strong intermolecular hydrogen bonding interactions that result in the formation of supramolecular organometallic networks. Significantly, the substitution pattern at the semiquinone ring affects the stereochemistry of the hydrogen bonding interactions. NMR spectra of 2b, 3b and 5b reveal dynamic hydrogen bonding in solution.     

Computational study of conformations and of sulfinyl oxygen-induced pentacoordination at silicon in 4-chloro-4-silathiacyclohexane 1-oxide and 4,4-dichloro-4-silathiacyclohexane 1-oxide

Second-order Møller-Plesset theory (MP2) and density functional theory (B3LYP) with the 6-311G(d,p) and 6-311+G(d,p) basis sets have been used to calculate the equilibrium geometries and relative energies of the chair, twist, and boat conformations of 4-chloro-4-silathiacyclohexane 1-oxide and 4,4-dichloro-4-silathiacyclohexane 1-oxide. The chair conformers of the axial sulfoxides are lower in energy than the chair conformers of the corresponding equatorial sulfoxides. MP2/6-311+G(d,p) predicted the chair conformer of axial trans-4-chloro-4-silathiacyclohexane 1-oxide (4a) to be 6.12, 0.44, and 0.45 kcal/mol, respectively, more stable than the corresponding 1,4-twist (4b), 2,5-twist (4c) and 1,4-boat (4d) conformers and 6.93 kcal/mol more stable than the 2,5-boat transition state ([4e]^‡). Structures 4c and 4d are stabilized by intramolecular coordination of the sulfinyl oxygen with silicon that results in trigonal bipyramidal geometry at silicon. The 1,4-boat conformer (7d) of axial 4,4-dichloro-4-silathiacyclohexane 1-oxide is also stabilized by transannular coordination of the sulfinyl oxygen with silicon. The energy difference (E_rel = 4.23 kcal/mol) between the chair conformer (7a) and 7d is larger than that between 4a and 4d. The relatively lower stability of the 1,4-boat conformer (7d) of axial 4,4-dichloro-4-silathiacyclohexane 1-oxide (7a) may be due to repulsive interactions of the axial halogen and sulfinyl oxygen atoms. The relative energies and structures of the conformers and transition states of cis- and trans-4-chloro-4-silathiacyclohexane 1-oxide and 4,4-dichloro-4-silathiacyclohexane 1-oxide are discussed in terms of hyperconjugative interactions, orbital interactions, nonbonded interactions, and intramolecular sulfinyl oxygen-silicon coordination.     

The synthesis of 2,4-dienyl fluoroalkyl ketones by a tandem three-stage sequence of propargyl 2-fluoroalkylvinyl ether formation, Claisen rearrangement, and allene-to-conjugated diene isomerization

A tandem three stages process to a series of trifluoromethyl and halodifluoromethyl 2,4-unsaturated ketones 4a-c is described. This process started with the preparation of 2-fluoroalkyl substituted propargyl vinyl ether 3a-d by treatment of a mixture of individual ethyl α-per(poly)fluoroalkyl acetates 1a-d and propargyl alcohol 2 in CH₂Cl₂ with the mixed base (Na₂CO₃/TEA) at ambient temperature. When heated in toluene at 80°C, these ethers readily underwent a tandem propargyl-allenyl Claisen rearrangement and isomerization of the resultant 3,4-dienone to give 2,4-unsaturated fluoroalkyl ketones 4a-c (Z/E mixture). The reaction of ethyl α-per(poly)fluoroalkyl acetate 1 with 1-phenyl propargyl alcohol 5 in refluxing CH₂Cl₂ in the presence of the mixed base (Na₂CO₃/TEA) directly afforded the corresponding unsaturated fluoroalkyl ketone 6a-c in one pot. In the presence of NaH, the reaction of ethyl 3-halo-3-fluoroalkylacrylates 8a-b with 1,1-dimethyl propargyl alcohol 9 at −50°C to 0°C also gave the unsaturated fluoroalkyl ketones 10a-b in one pot. The difluorovinyl propargyl ether 11 produced by reduction of 2-bromodifluoromethyl substituted propargyl vinyl ether 3b rearranged in hot benzene to give the corresponding allene 12 bearing a gem-difluoromethylene group in the middle of the aliphatic chain.     

α,β-(Phosphino)(aminocarbene) and α,ω-(phosphino)(oxyaminocarbene): new bidentate ligands for transition metal complexes

Direct complexation of (amino)(phosphino)carbene 1a and (amino)(oxy)carbene 1b featuring a phosphino group in position-6 to the carbene with [Rh(CO)₂Cl]₂ has been studied. With the 1,2-bidentate ligand 1a, an original cationic complex 2 featuring two (amino)(phosphino)carbenes η²-bonded to the metal has been isolated in 79% yield. In the case of the 1,6-bidentate ligand 1b, a rhodium(I) complex 3 in which the carbene is in trans position relative to the CO ligand was obtained in 85% yield. Both compounds were fully characterized including X-ray diffraction studies.     

Reversible pyranyl complex formation and the mechanism of rearrangement to (η-6-oxocycloheptadienyl)Mn(CO)3 complexes in the reaction of β-cyclomanganated 1,5-diarylpenta-1,4-dien-3-ones and alkynes; the crystal structure of [2,4-diphenyl-6-(2-phenylethenyl)pyranyl-η]tricarbonylmanganese

[1-Phenyl-2-[(E)-3-phenylprop-2-en-1-oyl-κO]ethenyl-κC¹]tetracarbonylmanganese (1a) reacts with PhCCH in CCl₄ at room temperature to form [2,4-diphenyl-6-(2-phenylethenyl)pyranyl-η⁵]tricarbonylmanganese (2a), whose X-ray crystal structure is reported to complement that of its isomer [6-oxo-2,4,7-triphenylcyclohepta-1,4-dienyl-1,2,3,4,5-η]tricarbonylmanganese (3a), previously obtained from the reaction under reflux; but for 1a and PhCCPh the pyranyl complex cannot be isolated before rearrangement to the 3a analogue occurs. More forcing reaction conditions for 1a with Me₃SiCCH and for [1-(2-trifluoromethylphenyl)-2-[(E)-3-(2-trifluoromethylphenyl)prop-2-en-1-oyl-κO]ethenyl-κC¹]tetracarbonylmanganese (1b) with Me₃SiCCH and PhCCH give new analogues of 3a where previously only 2a analogues had been isolated.The reaction in CCl₄ under reflux of PhCCH and the β-deuterio analogue of 1a, [1-phenyl-2-[(E)-3-phenylprop-2-en-1-oyl-3d-κO]ethenyl-κC¹]tetracarbonylmanganese, gave deuteriated 3a with exo-D at the α-carbon, C7. This is inconsistent with the Mn-mediated Ph migration mechanism originally proposed to accommodate the endo position of Ph in 3a, and instead it implicates a cyclopropyl carbonyl-addition intermediate or a cyclopropyl acyl-substitution transition state in the key rearrangement step for 2a → 3a.     

Ring-opening metathesis polymerization (ROMP) of N-cycloalkyl-7-oxanorbornene dicarboximides by well-defined ruthenium initiators

Ring-opening metathesis polymerization (ROMP) of exo-N-(1-adamantyl)-7-oxanorbornene-5,6-dicarboximide (AdONDI) (3a), exo-N-cyclohexyl-7-oxanorbornene-5,6-dicarboximide (ChONDI) (3b) and exo-N-phenyl-7-oxanorbornene-5,6-dicarboximide (PhONDI) (3c) using well-defined alkylidene ruthenium catalysts (PCy₃)₂(CI)₂RuCHPh (I) and (1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) (PCy₃)CI₂RuCHPh (II) was studied. The catalysts I and II gave polymers with around 70% and 50% trans vinylene content, respectively. The homopolymer of 3a had a T_g of 198 °C, while poly-3b showed a T_g of 122 °C. Copolymers of 3a, 3b and 3c with norbornene (NB) showed significant T_g increases over poly-NB.     

Preparation of chelate bis(imine)nickel allyl systems by reaction of their corresponding butadiene complexes with electrophiles

The chelate 1,2-bis(imine)nickel(butadiene) complex 4a (chelate ligand derived from condensation of biacetyl with 2,6-diisopropylaniline) adds the strong Lewis acid B(C₆F₅)₃ at the terminal carbon atom of the butadiene ligand to yield the dipolar substituted π-allyl-type betaine complex (lig)Ni[η³-C₃H₄-CH₂B(C₆F₅)₃] (Z-6a). At 90 °C the kinetically formed product equilibrated with its E-6a isomer. Similarly, 4a adds the boron Lewis acid (pyrrolyl)B(C₆F₅)₂ to yield the corresponding neutral dipolar π-allyl betaine complex Z-7a, that slowly equilibrated with E-7a over several hours at ambient temperature. Protonation of the butadiene ligand of complex 4a was achieved by treatment with the neutral Brønsted acid (2H-pyrrol)B(C₆F₅)₃ to yield the [(lig)Ni(η³-crotyl)⁺][(pyrrolyl)B(C₆F₅)₃⁻] salt 9a (Z-/E-9a ratio=90:10 upon preparation). At 298 K this salt rearranged to a 5:95 mixture of Z-9a/E-9a with a Gibbs activation energy of ΔG^‡ (298 K)=22.3±0.2 kcal mol⁻¹. Complex 4a added [Ph₃C⁺] to the butadiene ligand to yield the salt [(lig)Ni(η³-C₃H₄-CH₂CPh₃)⁺][B(C₆F₅)₄⁻] (Z-12a), that proved isomerically stable under the applied reaction conditions. Similar reactions were carried out starting from the acenaphthylene 1,2-dione derived chelate bis(imine)Ni(butadiene) complex 4b. The systems 6, 7, 9 and 12 were found to be active ethene polymerization catalysts in the presence of Al(i-Bu)₃.     

Synthesis,structure, and electrochemistry of pyridinecarboxamide cobalt(III) complexes; the effect of bridge substituents on the redox properties

Two series of complexes of the types trans-[Co^III(Mebpb)(amine)₂]ClO₄ {Mebpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-methylbenzene dianion, and amine = pyrrolidine (prldn) (1a), piperidine (pprdn) (2a), morpholine (mrpln) (3a), benzylamine (bzlan) (4a)}, and trans-[Co^III(cbpb)(amine)₂]X {cbpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-chlorobenzene dianion, and amine = pyrrolidine (prldn), X = PF₆ (1b), piperidine (pprdn), X = PF₆ (2b), morpholine (mrpln), X = ClO₄ (3b), benzylamine (bzlan), X = PF₆ (4b)} have been synthesized and characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structure of 1a has been determined by X-ray diffraction. The electrochemical behavior of these complexes, with the goal of evaluating the effect of axial ligation and equatorial substitution on the redox properties, is also reported. The reduction potential of Co^III, ranging from −0.53 V for (1a) to −0.31 V for (3a) and from −0.48 V for (1b) to −0.22 V for (3b) show a relatively good correlation with the σ-donor ability of the axial ligands. The methyl and chloro substituents of the equatorial ligand have a considerable effect on the redox potentials of the central cobalt ion and the ligand-centered redox processes.     

Synthesis and dynamics of atropisomeric (S)-N-(α-phenylethyl)benzamides

The synthesis of atropisomeric 2-substituted benzamides 2a-e, 3a-e, and 4a-e, and characterization by X-ray structure analysis of 2d, 2e, 3c, 3e, 4c, and 4e are reported. Dynamic ¹H NMR spectroscopic studies of benzamides 2b-d, 3b-d, and 4b-d indicate that only two of the four possible rotamers are present in solution, with population ratios ranging between 1.5:1 and 4.1:1. The measured free energy of activation to interconversion of the rotamers ranged from 12.4 to 18.9 kcal mol⁻¹. Benzamides ArCON[(S)-phenethyl]₂ (2e, 3e, and 4e), exhibited atropisomer ratios between 1.7:1 and 1:1, and free energies of interconversion of the rotamers ranged from 11.5 to 17.6 kcal mol⁻¹. The highest rotation barriers were observed for the ortho-nitro derivatives 2a-e. Molecular calculations at the semiempirical level (PM3MM) gave free energies of activation for benzamides 2e and 3e of 23.6 and 12.4 kcal mol⁻¹, respectively, which are comparable to the experimental values.