Enantioselective Synthesis of L-CCG-I

Introduction of natural menthol as the chiral auxiliary in a gamma-Br-alpha,beta-unsaturated ester leads to enantioselective generation of three chiral centers in a single step on reaction with a glycine anion equivalent to provide L-CCG-I in 94% ee.     

Two highly unsymmetrical tetradentate (N3O) Schiff base copper(II) complexes: Template synthesis,structural characterization,magnetic and computational studies

Two new copper(II) complexes, [Cu₂(L¹)₂](ClO₄)₂ (1) and [Cu(L²)(ClO₄)] (2), of the highly unsymmetrical tetradentate (N₃O) Schiff base ligands HL¹ and HL² (where HL¹ = N-(2-hydroxyacetophenone)-bis-3-aminopropylamine and HL² = N-(salicyldehydine)-bis-3-aminopropylamine) have been synthesised using a template method. Their single crystal X-ray structures show that in complex 1 two independent copper(II) centers are doubly bridged through phenoxo-O atoms (O1A and O1B) of the two ligands and each copper atom is five-coordinated with a distorted square pyramidal geometry. The asymmetric unit of complex 2 consists of two crystallographically independent N-(salicylidene)-bis(aminopropyl)amine-copper(II) molecules, A and B, with similar square pyramidal geometries. Cryomagnetic susceptibility measurements (5–300 K) on complex 1 reveal a distinct antiferromagnetic interaction with J = ?23.6 cm^?1, which is substantiated by a DFT calculation (J = ?27.6 cm^?1) using the B3LYP functional. Complex 1, immobilized over highly ordered hexagonal mesoporous silica, shows moderate catalytic activity for the epoxidation of cyclohexene and styrene in the presence of TBHP as an oxidant.     

Cascade synthesis of selective dihydro pyridazino fused acridinone derivatives via MCM-41 catalyzed ring-opening/ring-closure reaction

An enhanced one-pot synthesis of new functionalized 5,6-dihydro-5,5-dimethyl-2-phenyl-2H-pyridazino[3,4,5-kl]acridin-1(4H)-one derivatives with different substituted patterns by using mesoporous MCM-41 catalyst via a ring opening/ring closure reaction process has been established. This MCM-41 silica catalyst has been synthesized and characterized using an array of sophisticated analytical techniques like BET, XRD, UHRTEM, etc. This reaction could be conducted from inexpensive substrates within short period under neat reflux conditions. Compared with the usual methods, the remarkable advantages of this method are milder reaction conditions, operational simplicity, higher yields, short reaction times and an environmentally friendly procedure.     

On water direct arylation of imidazo[1,2-a]pyridines with aryl halides

A simple, mild, and ecofriendly protocol for a palladium-catalysed direct arylation of imidazo[1,2-a]pyridines with aryl halides on water is reported. This protocol does not require any ligand and tolerate variety of functional groups on both the coupling partners. The simple base KOH is highly efficient in this transformation.

1. Download high-res image (73KB)
2. Download full-size image

     

Synthesis, characterization and enhanced photoconductivity from a mesoporous titania on dye doping

New wormhole-like mesoporous TiO₂ material has been synthesized through a convenient sol-gel method in the presence of a Schiff base secondary amine hexadecyl-2-pyrrole-methylamine (HPMA) containing chelating donor sites as template or structure directing agent (SDA). SDA molecules can be easily removed from the composite to generate mesoporosity and upon removal of the SDA molecule, this mesoporous TiO₂ material showed very high surface area (480 ± 10 m²/g) with an average pore diameter of 2.57 ± 0.05 nm. When Rose Bengal dye is entrapped inside the nanopores of this material, it showed a drastic enhancement (ca. 40-folds) in the photoconductivity vis-à-vis mesoporous TiO₂ alone under white light illumination.     

Development and validation of an LC-ESI-MS/MS method for simultaneous quantitation of olmesartan and pioglitazone in rat plasma and its pharmacokinetic application

A simple, high‐throughput and specific high‐performance liquid chromatography tandem mass spectrometry method has been developed and validated according to the FDA guidelines for simultaneous quantification of olmesartan and pioglitazone in rat plasma. The bioanalytical method consists of liquid–liquid extraction and quantitation by triple quadrupole mass spectrometry using electrospray ionization technique, operating in multiple reaction monitoring and positive ion modes. The compounds were eluted isocratically on a C₁₈ column with a mobile phase consisting of a mixture of methanol and water (containing 0.5% formic acid) in a ratio of 9:1. The response to olmesartan and pioglitazone was linear over the range 0.01–10 µg/mL. The validation results demonstrated that the method had satisfactory precision and accuracy across the calibration range. Intra‐ and inter‐day precisions ranged from 0.66 to 3.32 and from 0.94 to 2.93% (%CV), respectively. The accuracy determined at three quality control levels was within 91.27–107.28%. There was no evidence of instability of the analytes in rat plasma following the stability studies. The method proved highly reproducible and sensitive and was successfully applied in a pharmacokinetic study after single dose oral administration of olmesartan and pioglitazone to the rat. Copyright © 2010 John Wiley & Sons, Ltd.     

Fabrication by Co-extrusion and electrochemical characterization of micro-tubular hollow fibre solid oxide fuel cells

A phase inversion process was used to co-extrude cerium–gadolinium oxide (Ce_0.9Gd_0.1O_1.95)/NiO–CGO dual-layer hollow fibres (HF), which were then sintered to form, respectively, the electrolyte and high porosity anode precursor of a solid oxide fuel cell (SOFC) with anode inner diameter of 0.8 mm. Graded CGO–lanthanum strontium cobalt ferrite (La_0.6Sr_0.4Fe_0.8Co_0.2O₃) cathode layers were then painted onto the CGO electrolyte to form a micro-tubular HF-SOFC. With a carefully designed anode current collector, this produced maximum power densities of 1186–5864 W m^? 2 at 450–570 °C. High magnification imaging analysis revealed large three-phase boundary regions within the anode, a dense electrolyte layer and clearly highlighted the multiple CGO–LSCF cermet and pure LSCF cathode layers. The performance of the HF-SOFC with a twenty millimetre active length showed no degradation after four thermal cycles between 300 °C and 570 °C.     

Onset of turbulence from the receptivity stage of fluid flows

The traditional viewpoint of fluid flow considers the transition to turbulence to occur by the secondary and nonlinear instability of wave packets, which have been created experimentally by localized harmonic excitation. The boundary layer has been shown theoretically to support spatiotemporal growing wave fronts by Sengupta, Rao, and Venkatasubbaiah [Phys. Rev. Lett. 96, 224504 (2006)] by a linear mechanism, which is shown here to grow continuously, causing the transition to turbulence. Here, we track spatiotemporal wave fronts to a nonlinear turbulent state by solving the full 2D Navier-Stokes equation, without any limiting assumptions. Thus, this is the only demonstration of deterministic disturbances evolving from a receptivity stage to the full turbulent flow. This is despite the prevalent competing conjectures of the event being three-dimensional and/or stochastic in nature.     

Transient response of hot electrons in narrow-gap semiconductors at low temperatures in the presence of a longitudinal quantizing magnetic field

Transient response of hot electrons in narrow-gap semiconductors to a step electric field in the presence of a longitudinal quantizing magnetic field has been studied at low temperatures using displaced Maxwellian distribution. The energy and momentum balance equations are used assuming acoustic phonon scattering via deformation potential responsible for the energy relaxation and elastic acoustic phonon scattering together with ionized impurity scattering for momentum relaxation. The calculations for the variation of drift velocity and electron temperature as functions of time are made for n-Hg_0.8Cd_0.2 Te in the extreme quantum limit at 1.5 K and 4.2 K. The momentum and energy relaxation times are found to be of the same order of magnitudes as with the experimental values. The magnetic field and lattice temperature dependences of the relaxation rates have been investigated.One of the authors, Suchandra Bhaumik, acknowledges the Council of Scientific and Industrial Research (New Delhi) for financial support.     

Raman imaging and stress quantification in self‐assembled graphene oxide fiber ‘Latin Letters’

To probe the intrinsic stress distribution in terms of spatial Raman shift (ω) and change in the phonon linewidth (Γ), here we analyze self‐assembled graphene oxide fibers (GOF) ‘Latin letters’ by confocal Raman spectroscopy. The self‐assembly of GOF ‘Latin letters’ has been explained through surface tension, π–π stacking, van der Waals interaction at the air–water interface and by systematic time‐dependent investigation using field emission scanning electron microscopy analysis. Intrinsic residual stress due to structural joints and bending is playing a distinct role affecting the E_2g mode (G band) at and away from the physical interface of GOF segments with broadening of phonon linewidth, indicating prominent phonon softening. Linescan across an interface of the GOF ‘letters’ reveals Raman shift to lower wavenumber in all cases but more so in ‘Z’ fiber exhibiting a broader region. Furthermore, intrinsic stress homogeneity is observed for ‘G’ fiber distributed throughout its curvature with negligible shift corresponding to E_2g mode vibration. This article demonstrates the significance of morphology in stress distribution across the self‐assembled and ‘smart‐integrable’ GOF ‘Latin letters’. Copyright © 2016 John Wiley & Sons, Ltd.