Third Generation ATP Sensor with Enzymatic Analyte Recycling

For the first time the direct electron transfer of an enzyme ‐ cellobiose dehydrogenase, CDH ‐ has been coupled with the hexokinase catalyzed competition for glucose in a sensor for ATP. To enhance the signal output for ATP, pyruvate kinase was coimmobilized to recycle ADP by the phosphoenolpyruvate driven reaction. The new sensor overcomes the limit of 1 : 1 stoichiometry of the sequential or competitive conversion of ATP by effective enzymatic recycling of the analyte. The anodic oxidation of the glucose converting CDH proceeds at electrode potentials below 0 mV vs. Ag|AgCl thus potentially interfering substances like ascorbic acid or catecholamines do not influence the measuring signal. The combination of direct electron transfer of CDH with the enzymatic recycling results in an interference‐free and oxygen‐independent measurement of ATP in the lower µmolar concentration range with a lower limit of detection of 63.3 nM (S/N=3).     

Thapsigargin,constitution of a sesquiterpene lactone histamine liberator from thapsia garganica

The major skin irritating constituent of the root of Thapsia garganica L. has been shown to be a hexaoxygenated-C₆-guaianolide esterificated with four carboxylic acids.     

Comparison of chromatographic ion-exchange resins. III. Strong cation-exchange resins

A comparative study was performed on strong cation-exchangers to investigate the pH dependence, efficiency, binding strength, particle size distribution, static and dynamic capacity, and SEM pictures of chromatographic resins. The resins tested included: SP Sepharose XL, Poros 50 HS, Toyopearl SP 550c, SP Sepharose BB, Source 30S, TSKGel SP-5PW-HR20, and Toyopearl SP 650c. Testing was performed with four different proteins: anti-FVII Mab (IgG), aprotinin, lysozyme, and myoglobin. Dependence of pH on retention was generally very low for proteins with high pI. An unexpected binding at pH 7.5 of anti-FVII Mab with pI < 7.5 was observed on several resins. Efficiency results show the expected trend of higher dependence of the plate height with increasing flow rate of soft resins compared to resins for medium and high-pressure operation. Determination of particle size distribution by two independent methods, Coulter counting and SEM, was in very good agreement. The mono-dispersed nature of Source 30S was confirmed. Binding to cation-exchange resins as a function of ionic strength varies depending on the specific protein. Generally, binding and elution at high salt concentration may be performed with Toyopearl SP 550c and Poros 50 HS, while binding and elution at low salt concentration may be performed with Toyopearl SP 650c. A very high binding capacity was obtained with SP Sepharose XL. Comparison of static capacity and dynamic capacity at 10% break-through shows in general approximately 50-80% utilisation of the total available capacity during chromatographic operation. A general good agreement was obtained between this study and data obtained by others. The results of this study may be used for selection of resins for testing in process development. The validity of experiments and results with model proteins were tested using human insulin precursor in pure state and in real feed-stock on Toyopearl SP 550c, SP Sepharose BB, and Toyopearl SP 650c. Results showed good agreement with experiments with model proteins.     

Identification of the species formed in the Fe/MgO system: A Raman and Mössbauer study

A set of samples of Fe/MgO, in the concentration range between 1.5 and 9 wt% of Fe, was prepared by the impregnation method and then calcined at 1073 K. All of them were characterized by XRD and Raman and Mössbauer spectroscopies. The data obtained show that the solids are made up of MgFeO₄ nanoclusters and Fe³⁺ ions dispersed in the MgO matrix. The size of the clusters and the amounts of each phase were calculated using the XRD and Mössbauer data.     

Green synthesis of para-Menthane-3,8-diol from Eucalyptus citriodora: Application for repellent products

A simple and efficient method was developed for the synthesis of para-Menthane-3,8-diol (PMD), a well-known repellent active against mosquitoes, from Eucalyptus citriodora essential oil by a treatment of citric acid in a biphasic medium (H₂O/essential oil). The E. citriodora contains as main component (+)-citronellal (74% in the present case), which cyclises (Prins reaction) to form cis/trans PMD isomers. As an example, an emulsion containing an aqueous solution of 7% citric acid and E. citriodora oil at 50°, conducted after 15 h stirring to 82% conversion of (+)-citronellal with a selectivity of 80% with the remaining presence of monoterpenes and sesquiterpenes in the medium. Investigations of lasting protection on human volunteers are carried out using a cage test bioassay protocol and Aedes aegypti mosquitoes. At 20% in ⁱPrOH, the new reaction mixture showed a complete protection of 303 min compared to 22 min with the pure essential oil. The modified oil was compared with N,N-diethyl-m-methylbenzamide (DEET), the most popular active used in repellent formulations. Thermogravimetric analyses (TGA) of E. citriodora, the modified oil, PMD, DEET, and (+)-citronellal were performed and showed a slow evaporation rate for PMD and DEET as well as for the modified oil, which may explain their long lasting protection action.     

Polypropylene/organoclay nanocomposites compatibilized with hydroxyl‐functional polypropylenes

The properties of polypropylene composites can be tailored through the use of nanoclay fillers. The effectiveness of a metallocene‐catalyzed hydroxyl‐functional polypropylene in the compatibilization of polypropylene layered nanosilicate composites was studied, and the results were compared with those for a commercial maleic anhydride functionalized polypropylene. Polypropylene/organoclay nanocomposites were prepared by melt blending, and two polypropylene/compatibilizer/organoclay ratios, 90/5/5 and 70/20/10, were characterized. The organomodification of the clay was carried out with octadecylamine and N‐methylundecenylamine. The structure of the layered silicate was studied by transmission electron microscopy, wide‐angle X‐ray scattering, and small‐angle X‐ray scattering. The fracture surfaces of the composites and thus the efficiency of the compatibilizers to penetrate the galleries of the organoclays were characterized by scanning electron microscopy, and the melt viscosity was studied by stress‐controlled rotational rheometry. The nanostructure was observed with both alkyl amines used for intercalation. The fillers facilitated the processability of all the composites, consisting of equal amounts of compatibilizer and organoclay filler and, in some of the composites, containing twice as much compatibilizer as organoclay filler. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1892–1903, 2005     

Convergence of a recursive robust algorithm with strongly regular observations

Robust estimation of parameters may be obtained via stochastic approximation algorithms. This paper deals with the properties of a recursive estimator of a location parameter in a stationary strongly regular process. Adaptive estimators of particular interest are also studied.     

Improved synthesis of oligonucleotides with an allylic backbone. Oligonucleotides containing acyclic, achiral nucleoside analogues: N-1 or N-9-[3-hydroxy-2-(hydroxymethyl)prop-1-enyl]nucleobases

An improved phosphoramidite method is described to prepare oligonucleotides modified with the acyclic, achiral monomers 1. Examination of dimers, prepared on solid support or in solution, showed that phosphortriester dimers containing the allylic unit 1 were unstable towards bases, whereas phosphordiester dimers were stable. Phosphordiester dimers were obtained by replacing cyanoethyl phosphoramidites 2 with phosphoramidites 3, which gave phosphordiesters directly upon oxidation. The phosphordiester dimers were found to be stable towards capping and oxidation, but were somewhat labile towards acids. By reducing the contact time to acids during detritylation it was possible to prepare oligonucleotides containing 4 or 8 modified A, G or T units. The modified oligonucleotides hybridized to complementary DNA and RNA, although with reduced affinity (DeltaT(m) per modification -1 to -5 degrees C).