Effect of high-pressure ammonia treatment on the activity of Ge3N4 photocatalyst for overall water splitting

The photocatalytic activity of beta-Ge(3)N(4) powder for overall water splitting is successfully enhanced by ammonia treatment at 823 K for 5-24 h at ammonia pressures of 20 MPa or greater. The surface and bulk nitrogen content in the treated samples varies according to the treatment temperature and treatment time, related to the stability of beta-Ge(3)N(4) powder under pressurized ammonia. The change in nitrogen content resulted in a change in the photocatalytic activity for overall water splitting. A beta-Ge(3)N(4) powder treated at 823 K for 5 h under ammonia at 20 MPa exhibited a photocatalytic activity 4 times higher than that of the as-synthesized powder, attributable to a decrease in the density of anion defects in the bulk and surface.     

Global stability of extended multi-group sir epidemic models with patches through migration and cross patch infection

In this article, we establish the global stability of an endemic equilibrium of multi-group SIR epidemic models, which have not only an exchange of individuals between patches through migration but also cross patch infection between different groups. As a result, we partially generalize the recent result in the article [16].     

Core–Shell‐Structured LaTaON2 Transformed from LaKNaTaO5 Plates for Enhanced Photocatalytic H2 Evolution

LaTaON₂ is a photocatalyst with intense visible light absorption up to 650 nm, but exhibits low H₂ evolution activity owing to uncontrolled facets and high defect densities. In this work, core–shell‐structured plate‐like LaKNaTaO₅/LaTaON₂ was synthesized by nitriding a layered perovskite‐type LaKNaTaO₅. The volatilization of K and Na species during the nitridation promoted the rapid transformation of LaKNaTaO₅ into LaTaON₂ along [010] direction with the plate‐like shape retained. This yielded high‐quality LaTaON₂ shells exposing (010) facets on the lattice‐matched LaKNaTaO₅ cores. After loading with a Rh co‐catalyst, LaKNaTaO₅/LaTaON₂ showed photocatalytic H₂ evolution activity four times greater than that obtained from conventional irregular‐shaped LaTaON₂ powders and utilized visible light up to 620 nm. This work provides a novel strategy yielding oxynitrides with well‐defined facets and low defect densities by selecting lattice‐matched oxide precursors containing volatile components.     

Zirconia-based planar NO2 sensor using ultrathin NiO or laminated NiO–Au sensing electrode

The nanostructured thin NiO films with the thicknesses of 30–180 nm were examined as a sensing electrode (SE) for the planar mixed-potential-type yttria-stabilized zirconia (YSZ)-based NO₂ sensor. The sensing characteristics were examined in the temperature range of 600–800 °C under the wet condition (5 vol.% water vapor). Among the NiO-SEs tested, the 60 nm-thick NiO-SE sintered at 1,000 °C was found to give the highest NO₂ sensitivity in the NO₂ concentration range of 50–400 ppm accompanying with fast response/recovery at the operating temperatures of 600–700 °C. The high NO₂ sensitivity was attributed to the high catalytic activity for both electrochemical reactions of O₂ and NO₂ at the interface of NiO-SE/YSZ. The ultrathin gold layer with the thickness of about 60 nm was additionally formed on the 60 nm-thick NiO-SE to fabricate the laminated-type (60 nm NiO/60 nm Au)-SE. It was demonstrated that the use of this laminated (NiO–Au)-SE improved both the sensitivity and the selectivity to NO₂.     

Acoustic energy harvesting using an electromechanical Helmholtz resonator

This paper presents the development of an acoustic energy harvester using an electromechanical Helmholtz resonator (EMHR). The EMHR consists of an orifice, cavity, and a piezoelectric diaphragm. Acoustic energy is converted to mechanical energy when sound incident on the orifice generates an oscillatory pressure in the cavity, which in turns causes the vibration of the diaphragm. The conversion of acoustic energy to electrical energy is achieved via piezoelectric transduction in the diaphragm of the EMHR. Moreover, the diaphragm is coupled with energy reclamation circuitry to increase the efficiency of the energy conversion. Lumped element modeling of the EMHR is used to provide physical insight into the coupled energy domain dynamics governing the energy reclamation process. The feasibility of acoustic energy reclamation using an EMHR is demonstrated in a plane wave tube for two power converter topologies. The first is comprised of only a rectifier, and the second uses a rectifier connected to a flyback converter to improve load matching. Experimental results indicate that approximately 30 mW of output power is harvested for an incident sound pressure level of 160 dB with a flyback converter. Such power level is sufficient to power a variety of low power electronic devices.     

A simple high‐performance liquid chromatography for the determination of linezolid in human plasma and saliva

Linezolid is an antimicrobial agent for the treatment of multiresistant Gram‐positive infections. A practical high‐performance liquid chromatography method was developed for the determination of linezolid in human plasma and saliva. Linezolid and an internal standard (o‐ethoxybenzamide) were extracted from plasma and saliva with ethyl acetate and analyzed on a Capcell Pak C₁₈ MG column with UV detection at 254 nm. The calibration curve was linear through the range 0.5–50 µg/mL using a 200 μL sample volume. The intra‐ and interday precisions were all <6.44% for plasma and 5.60% for saliva. The accuracies ranged from 98.8 to 110% for both matrices. The mean recoveries of linezolid were 80.8% for plasma and 79.0% for saliva. This method was used to determine the plasma and saliva concentrations of linezolid in healthy volunteers who were orally administered a 600 mg dose of linezolid. Our liquid–liquid extraction procedure is easy and requires a small volume of plasma or saliva (200 μL). This small volume can be advantageous in clinical pharmacokinetic studies, especially if children participate. Copyright © 2015 John Wiley & Sons, Ltd.     

Recyclable carbon fiber‐reinforced plastics (CFRP) containing degradable acetal linkages: Synthesis,properties, and chemical recycling

Two epoxy resins containing degradable acetal linkages were synthesized by the reaction of cresol novolak‐type phenolic resin (CN) with vinyl ethers containing a glycidyl group [cyclohexane dimethanol vinyl glycidyl ether (CHDMVG) and 4‐vinyloxybutyl glycidyl ether (VBGE). Carbon fiber‐reinforced plastics (CFRPs) were prepared by heating laminated prepreg sheets with CN‐CHDMVG resin (derived from CN and CHDMVG) and CN‐VBGE resin (derived from CN and VBGE), in which carbon fibers are impregnated with epoxy resins containing curing agents [dicyandiamide (DICY)] and curing accelerator [3‐(3,4‐dichlorophenyl)‐1,1‐dimethylurea (DCMU)]. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs exhibited almost the same tensile strength as the conventional bisphenol‐A‐based CFRPs. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs underwent smooth breakdown with the treatment of hydrochloric acid in tetrahydrofuran at room temperature for 24 h to regenerate strands of carbon fibers. The surface conditions of the recovered carbon fibers had little changes during degradation and recovery processes on the basis of scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The recovered carbon fibers exhibited almost the same tensile strength as virgin carbon fibers and hence would be reused for the production of CFRPs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1052–1059