Synthesis and evaluation of 1-arylsulfonyl-3-piperazinone derivatives as factor Xa inhibitors III. Effect of ring opening of piperazinone moiety on inhibition

Compounds containing an ethylenediamine structure in place of the piperazine ring of M55113 (1) and M55551 (2) were synthesized to investigate the effects of a piperazine moiety and evaluated for activity as factor Xa (FXa) inhibitors. Most such compounds, however, exhibited lower activity (1/10-1/100) than that of M55113 and M55551 as FXa inhibitors.     

Mixed micellar properties of cationic trimeric-type quaternary ammonium salts and anionic sodium n-octyl sulfate surfactants

The properties of quaternary ammonium salt-type cationic trimeric surfactants (m-2-m-2-m, m represents the carbon atom number in alkyl chain lengths of 8, 10, and 12) and oppositely charged anionic monomeric surfactant, sodium n-octyl sulfate (SOS), were characterized by employing several techniques such as static surface tension, fluorescence spectroscopy, and dynamic light-scattering measurements. The critical micelle concentrations (cmc) of m-2-m-2-m were much lower than those of the corresponding dimeric and monomeric surfactants, and decreased with increasing chain length. The addition of SOS to m-2-m-2-m solutions resulted in a further decrease of the cmc. The mixed surfactants showed higher efficiencies in lowering the surface tension than the individual surfactants. The fluorescence measurements suggested the formation of mixed micelles with a hydrophobic environment in the solutions even at lower concentrations. The dynamic light-scattering study indicated the presence of two different kinds of aggregates with different hydrodynamic diameters. The larger one was attributed to the mixed micelle of m-2-m-2-m and SOS. These results indicated a decline of the electrostatic repulsion between cationic head groups through the incorporation of anionic surfactant into the mixed surfactants.     

Novel electron-transfer oxidation of Lipshutz cuprates with 1,4-benzoquinones: an efficient homo-coupling reaction of aryl halides and its application to the construction of macrocyclic systems

The electron transfer reaction from Lipshutz cuprates, which can be easily prepared from aryl bromides, to 1,4-benzoquinones was found to proceed smoothly, affording either the corresponding homo-coupling products, in modest to excellent yields, or macrocyclic products selectively.     

Studies on the constituents of Syringa species. X. Five new iridoid glycosides from the leaves of Syringa reticulata (Blume) Hara

Five new iridoid glycosides, (8Z)-ligstroside (1), (8Z)-nüzhenide (3), 6'-O-alpha-D-glucopyranosylsyringopicroside (4), 3'-O-beta-D-glucopyranosylsyringopicroside (5) and 4'-O-beta-D-glucopyranosylsyringopicroside (6) were isolated, together with a known one, (8E)-nüzhenide (2), from the leaves of Syringa reticulata. Their structures were established on the basis of chemical and spectral data. Compounds 1 and 3 are the first findings of a (8Z)-oleoside-type secoiridoid. Compound 4 is the first naturally occurring iridoid di-glycoside having an isomaltose.     

Synthesis, liquid-crystalline properties, and supramolecular nanostructures of dendronized poly(isocyanide)s and their precursors

A series of novel dendronized pi-conjugated poly(isocyanide)s were synthesized successfully by using a Pd-Pt mu-ethynediyl dinuclear complex ([ClPt{P(C2H5)3}2C[triple bond]CPt{P(C2H5)3}2Cl]) as the initiator. The polymerizations of the dendronized monomers follow first-order kinetics, indicating that living polymerization takes place. The obtained polymers exhibit narrow polydispersities in the range of 1.03-1.20. Thermal properties of the poly(isocyanide)s as well as their isocyanide monomers and precursors with formamido (HCONH-) moieties as apexes were investigated by using differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide-angle X-ray diffraction (WAXD). Both the peripheries and the apex groups of the dendrons affect the formation of supramolecular column and/or cubic phases of the precursors and monomers. The formamido precursor forms a liquid-crystalline phase due to intermolecular hydrogen bonding. The isocyanide monomer lacks this hydrogen-bonding ability and does not display an organized mesophase. All of the rigid poly(isocyanide)s with the monodendrons exhibit columnar liquid-crystalline phases. Interestingly, cylindrical structures of a poly(isocyanide) were directly visualized by using transmission electron microscopy (TEM).     

Synthesis and catalytic activity of gold-silver binary nanoparticles stabilized by PAMAM dendrimer

Gold-silver binary nanoparticles, which feed atomic ratios of gold to silver were 3:1, 1:1, and 1:3, were prepared. These particles were stabilized by amine-terminated (generation (G) 3.0 and 5.0) and carboxyl-terminated (G 3.5 and 5.5) poly(amidoamine) (PAMAM) dendrimers in water. UV-vis spectra indicate that the particles are not mere physical mixtures of monometallic particles or core/shell type but alloy. According to transmission electron microscope (TEM) observation, the mean diameters of the particles were 7-10 nm for silver particles and 3-4 nm for both gold and alloy particles, respectively. Catalytic activities for reduction of p-nitrophenol were investigated by monitoring the absorbance at 400 nm during the reaction. They were proportional to the feed ratio of gold in the particles and showed a maximum at the ratio of Au:Ag=3:1.     

Size Effect on Crystal Structures of Barium Titanate Nanoparticles Prepared by a Sol-Gel Method

Barium titanate nanoparticles were synthesized by the hydrolysis of complex alkoxide precursor that was prepared in a reflux of metallic barium and tetraethylorthotitanate in solvent. The hydrolysis was performed by the addition of water/ethanol solution to the precursor solution. As reflux time increased, particle sizes, which were measured with transmittance electromicroscopy, became smaller followed by sharpening of size distribution. As water concentration and benzene content in the hydrolysis increased, the particle size increased with crystallite size that was determined with X-ray diffractometry. No significant difference was observed between the particle and crystallite sizes up to 30 nm. Over the size of 30 nm, the particle size was larger than the crystallite size because of generation of polycrystallites. Annealing treatments in air at 400 and 1000°C also increased both the particle and crystallite sizes. The crystallite sizes estimated from the (111) peaks were smaller than those from (110) peaks in a range of sizes larger than 40 nm, which indicated that the critical crystallite size of transformation from cubic to tetragonal structures was approximately 40 nm.     

Dielectrophoretic micropatterning with microparticle monolayers covalently linked to glass surfaces

Two-dimensional micropatterns of microparticles were fabricated on glass substrates with negative dielectrophoretic force, and the patterned microparticles were covalently bound on the substrate via cross-linking agents. The line and grid patterns of microparticles were prepared using the repulsive force of negative dielectrophoresis (n-DEP). The template interdigitated microband array (IDA) electrodes (width and gap 50 mum) were incorporated into the dielectrophoretic patterning cell with a fluidic channel. The microstructures on the glass substrates with amino or sulfhydryl groups were immobilized with the cross-linking agents disuccinimidyl suberate (DSS) and m-maleimidobenzoyl-N-hydroxy-succinimide ester (MBS). Diaphorase (Dp), a flavoenzyme, was selectively attached on the patterned microparticles using the maleimide groups of MBS. The enzyme activity on the patterned particles was electrochemically characterized with a scanning electrochemical microscope (SECM) in the presence of NADH and ferrocenylmethanol as a redox mediator. The SECM images proved that Dp was selectively immobilized onto the surface of microparticles to maintain its catalytic activity.     

Catalytic dissymmetrization of meso-2-imidazolidinones: alternative route to chiral synthons for 1,2-diamines

The chiral functionalization of a simple heterocycle, 1,3-dihydro-2-imidazolone, was achieved by the highly enantioselective monodeacylation of meso-1,3-diacetyl-2-imidazolidinones via an oxazaborolidine-catalyzed borane reduction. This kinetically controlled dissymmetrization is sufficiently effective to provide a synthetic route to either enantiomer of (4S, 5S)- or (4R, 5R)-4,5-dimethoxy-2-imidazolidinone derivatives, which serve as chiral synthons for threo-1,2-diamines.     

In situ conductivity measurements of LiMn2O4 thin films during lithium insertion/extraction by using interdigitated microarray electrodes

Thin films of LiMn₂O₄ have been prepared by RF magnetron sputtering on interdigitated microarray electrodes. In situ conductivity–potential profiles and cyclic voltammograms during extraction/insertion processes of Li ions were obtained simultaneously in nonaqueous and aqueous electrolyte solutions (1 M LiClO₄/propylene carbonate and 1 M LiCl/water). The electronic conductivity of Li_{1– x} Mn₂O₄ was found not to show metallic transition and maintain its semiconducting state during the extraction/insertion of Li ion. A slight decrease in conductivity was observed with increasing the anodic potential, i.e., with increasing x (lithium extraction) and recovered reversibly when the potential returned to the cathodic side (re-insertion of Li ions). Similar results were obtained in both aqueous and nonaqueous electrolyte solutions. Received: 17 June 1997 / Accepted: 2 January 1998