Photoinduced Fe-Cp bond cleavage and insertion reactions of strained silicon- and sulphur-bridged [1]ferrocenophanes in the presence of transition-metal carbonyls

The photochemical reactions of the moderately strained sila[1]ferrocenophane [Fe(eta-C(5)H(4))(2)SiPh(2)] (1) and the highly strained thia[1]ferrocenophane [Fe(eta-C(5)H(4))(2)S] (8) with transition-metal carbonyls ([Fe(CO)(5)], [Fe(2)(CO)(9)] and [Co(2)(CO)(8)]) have been studied. The use of metal carbonyls has allowed the products of photochemically induced Fe-cyclopentadienyl (Cp) bond cleavage reactions in the [1]ferrocenophanes to be trapped as stable, characterisable products. During the course of these studies the synthesis of 8 from [Fe(eta-C(5)H(4)Li)(2)TMEDA] (TMEDA=N,N,N',N'-tetramethylethylenediamine) and S(SO(2)Ph)(2) has been significantly improved by a change of reaction solvent and temperature. Photochemical reaction of 1 with excess [Fe(CO)(5)] in THF gave the dinuclear complex [Fe(2)(CO)(2)(mu-CO)(2)(eta-C(5)H(4))(2)SiPh(2)] (9). The analogous photolytic reaction of 8 with [Fe(CO)(5)] in THF gave cyclic dimer [Fe(eta-C(5)H(4))(2)S](2) (10) and [Fe(2)(CO)(2)(mu-CO)(2)(eta-C(5)H(4))(2)S] (11), with the former being the major product. Photolysis of 1 with [Co(2)(CO)(8)] afforded the remarkable tetrametallic dimer [(CO)(2)Co(eta-C(5)H(4))SiPh(2)(eta-C(5)H(4))Fe(CO)(2)](2) (13). The corresponding photochemical reaction of 8 with [Co(2)(CO)(8)] gave a trimetallic insertion product in high conversion, [Co(CO)(4)(CO)(2)Fe(eta-C(5)H(4))S(eta-C(5)H(4))Co(CO)(2)] (14). These reactivity studies show that UV light promotes Fe-Cp bond cleavage reactions of both of the [1]ferrocenophanes 1 and 8. We have found that, whereas the less strained sila[1]ferrocenophane 1 requires photoactivation for Fe-Cp bond insertions to occur, the highly strained thia[1]ferrocenophane 8 undergoes both irradiative and non-irradiative insertions, although the latter occur at a slower rate. Our results suggest that such photoinduced bond cleavage reactions may be general and applicable to other related strained organometallic rings with pi-hydrocarbon ligands.     

Mechanism of efficient firefly bioluminescence via adiabatic transition state and seam of sloped conical intersection

Firefly emission is a well-known efficient bioluminescence. However, the mystery of the efficient thermal generation of electronic excited states in firefly still remains unsolved, particularly at the atomic and molecular levels. We performed SA-CASSCF(12,12)/6-31G* and CASPT2(12,12)/6-31G*//SA-CASSCF(12,12)/6-31G* calculations to elucidate the reaction mechanism of bioluminescence from the firefly dioxetanone in the gas phase. Adiabatic transition state (TS) for the O-O bond cleavage and the minimum energy conical intersection (MECI) were located and characterized. The unique topology of MECI featuring a seam of a sloped conical intersection for the firefly dioxetanone, which was uncovered for the first time, emerges along the reaction pathway to provide a widely extended channel to diabatically access the excited-state from the ground state.     

两种蒙药中锗的差示脉冲极谱测定及其红外光谱的差异

采用差示脉冲极谱法,以3,4-二羟基苯甲醛的0.072 mol·L-1硫酸溶液作为底液,在峰电位为-0.53 Ⅴ(vs．Ag/AgCl),锗(Ⅳ)浓度在1.03×10-5～1004×10-4mol·L-1范围内与峰电流呈线性关系.据此测定了阿嘎日-35和阿嘎日-8中总锗、无机锗、有机锗含量,并利用红外光谱比较了两种蒙药的红外谱图的差异,据此可对两种蒙药予以区别.     

One‐Electron Oxidation of [M(PtBu3)2] (M=Pd,Pt): Isolation of Monomeric [Pd(PtBu3)2]+ and Redox‐Promoted C−H Bond Cyclometalation

Oxidation of zero‐valent phosphine complexes [M(P^tBu₃)₂] (M=Pd, Pt) has been investigated in 1,2‐difluorobenzene solution using cyclic voltammetry and subsequently using the ferrocenium cation as a chemical redox agent. In the case of palladium, a mononuclear paramagnetic Pd^I derivative was readily isolated from solution and fully characterized (EPR, X‐ray crystallography). While in situ electrochemical measurements are consistent with initial one‐electron oxidation, the heavier congener undergoes C−H bond cyclometalation and ultimately affords the 14 valence‐electron Pt^II complex [Pt(κ²_PC‐P^tBu₂CMe₂CH₂)(P^tBu₃)]⁺ with concomitant formation of [Pt(P^tBu₃)₂H]⁺.     

Asymmetric total synthesis of (-)-indicol by a carbene cyclization-cycloaddition cascade strategy

The first total synthesis of a secodolastane, (-)-indicol, has been accomplished. The key reaction is a rhodium(II)-mediated carbene cyclization-cycloaddition cascade, by which the core bicyclo[5.4.0]undecane skeleton was assembled. In this one-pot reaction, a domino series of transformations resulting in the construction of three sigma bonds and three stereocenters was realized in good yield.     

Detection, characterization, and quantification of resveratrol glycosides in transgenic arabidopsis over-expressing a sorghum stilbene synthase gene by liquid chromatography/tandem mass spectrometry

Transgenic Arabidopsis plants were analyzed by liquid chromatography/tandem mass spectrometry (LC/MS/MS) to investigate the glycosylation patterns of resveratrol derived from expression of a sorghum stilbene synthase gene. In negative ionization mode, the different resveratrol derivatives fragmented to yield the diagnostic deprotonated resveratrol ion at m/z 227.2. The use of precursor ion scanning led to the identification of precursor ions for different resveratrol glycosides through rapid differentiation from other phytochemical constituents. Structural information was generated simultaneously from the low-collision-energy product ion spectra using hybrid linear ion-trap mass spectrometry. Three additional resveratrol-related metabolites - a resveratrol diglucoside (M1) and trans- and cis-resveratrol acetylhexosides (M2 and M3) - were detected in the crude plant extracts. The identities of M1, M2, and M3 were confirmed by accurate mass analysis on a quadrupole time-of-flight mass spectrometer as well as beta-glucosidase digestion or UV-induced isomerization. Quantitative analyses by LC/MS in multiple reaction monitoring mode revealed that resveratrol diglucoside and cis-resveratrol acetyhexoside accumulated up to 2.79 and 10.38 microg/g, respectively, while trans-resveratrol acetylhexoside was barely detectable. This study demonstrated the power of the hybrid linear ion-trap technology for simultaneous profiling and structural characterization of stilbene-related metabolites, which would be useful to understand how resveratrol is modified in sorghum and other plants.     

Novel reactive thermosensitive polyethers – control of transition point

A new class of thermosensitive polymers based on polyethers is discussed. Using living anionic polymerisation techniques a series of homo- and block copolymers of 2,3-epoxypropanol-1 (the glycidol), ethoxy ethyl glycidol ether, its hydrophobic derivative, and ethylene oxide of different molar masses and topology (linear and comb-like) was obtained. By simple chemical modification of hydroxyl groups in polyglycidol segments hydrophobic elements were introduced into polymer chains, which allowed to control the transition point related to the lower critical solution temperature between 0 to 100°C. The relation between the transition temperature and the structure of obtained polymers is discussed.     

Gauge-invariant sub-structures of tree-level double-emission exact QCD spin amplitudes

In this note we discuss possible separations of exact, massive, tree-level spin amplitudes into gauge-invariant parts. We concentrate our attention on processes involving two quarks entering a color-neutral current and, thanks to the QCD interactions, two extra external gluons. We will search for forms compatible with parton-shower languages, without applying approximations or restrictions on phase space regions. Special emphasis will be put on the isolation of parts necessary for the construction of evolution kernels for individual splittings and to some degree for the running coupling constant as well. Our aim is to better understand the environment necessary to optimally match hard matrix elements with parton-shower algorithms. To avoid complications and ambiguities related to regularization schemes, we ignore, at this point, virtual corrections. Our representation is quite universal: any color-neutral current can be used; in particular, our approach is not restricted to vector currents only. This work is partially supported by RTN European Programme, MRTN-CT-2006-035505 (HEPTOOLS, Tools and Precision Calculations for Physics Discoveries at Colliders).     

Utilization of the highly environment-sensitive emission properties of rhenium(I) amidodipyridoquinoxaline biotin complexes in the development of biological probes

We report the synthesis and characterization of luminescent rhenium(I) amidodipyridoquinoxaline biotin complexes [Re(CO)3(dpqa)(L)](PF6) (dpqa = 2-(n-butylamido)dipyrido[3,2-f:2',3'-h]quinoxaline; L = 4-(biotinamidomethyl)pyridine (py-4-CH2-NH-biotin) (1), 3-(N-((2-biotinamido)ethyl)amido)pyridine (py-3-CO-NH-en-NH-biotin) (2), 4-(N-((6-biotinamido)hexanoyl)aminomethyl)pyridine (py-4-CH2-NH-cap-NH-biotin) (3)), and their biotin-free counterpart [Re(CO)3(dpqa)(py)](PF6) (py = pyridine (4)). Upon irradiation, these complexes exhibited intense triplet metal-to-ligand charge-transfer (3MLCT) (dpi(Re) --> pi(dpqa)) emission in fluid solutions at 298 K and in alcohol glass at 77 K. However, the emission became much weaker in aqueous buffer, probably due to the interactions of water molecules with the amide substituent of the dpqa ligand. These properties render the complexes good candidates as luminescent probes for hydrophobic media, such as the substrate-binding sites of proteins. The avidin-binding properties of the new biotin complexes have been studied by 4'-hydroxyazobenzene-2-carboxylic acid (HABA) assays, emission titrations, and competitive association and dissociation assays. Most importantly, the complexes showed a profound increase in emission intensities upon binding to avidin. Additionally, we found that the fluorescence of anthracene was quenched by these rhenium(I) complexes, and the 3MLCT emission of the complexes was also quenched by anthracene. On the basis of these findings, new homogeneous assays for biotin using these complexes, avidin, and anthracene-labeled avidin have been designed.