Water Structure Modification by Sugars and Its Consequence on Micellization Behavior of Cetyltrimethylammonium Bromide in Aqueous Solution

Water structure modification by sugars with a wide difference in stereoregular structures ranging from monosaccharide to trisaccharide and its consequence on the micellization behavior of cetyltrimethylammonium bromide (CTAB) in aqueous medium have been investigated. The characteristic variation in water absorption peaks in the presence of d(?)fructose has been studied by near-infrared spectroscopy. The analyses show that the hydrogen bonding capability of d(+)glucose, d(?)fructose, sucrose, trehalose and raffinose is mainly responsible for the variation in water-additive interactions. The critical micelle concentration determined by specific conductivity measurement and aggregation number determined by steady state fluorescence quenching method show significant variations in presence of additives for CTAB in aqueous solution. The sugars interact with the water structure to varying extents owing to differences in hydrogen bonding capability depending on the stereoregularity of the structure. This induces differences in the microenvironment for competition between the hydrophobic interaction and degree of hydration of the hydrophilic group of the surfactant to ultimately influence the micellization behavior in aqueous solution.     

Separation of natural antioxidants using PDMS electrophoresis microchips coupled with amperometric detection and reverse polarity

This report describes the use of PDMS ME coupled with amperometric detection for rapid separation of ascorbic, gallic , ferulic, p‐coumaric acids using reverse polarity. ME devices were fabricated in PDMS by soft lithography and detection was accomplished using an integrated carbon fiber working electrode aligned in the end‐channel configuration. Separation and detection parameters were investigated and the best conditions were obtained using a run buffer consisting of 5 mM phosphate buffer (pH 6.9) and a detection voltage of 1.0 V versus Ag/AgCl reference electrode. All compounds were separated within 70 s using gated injection mode with baseline resolution and separation efficiencies between 1200 and 9000 plates. Calibration curves exhibited good linearity and the LODs achieved ranged from 1.7 to 9.7 μM. The precision for migration time and peak height provided maximum values of 4% for the intrachip studies. Lastly, the analytical method was successfully applied for the analysis of ascorbic and gallic acids in commercial beverage samples. The results achieved using ME coupled with amperometric detection were in good agreement with the values provided by the supplier. Based on the data reported here, the proposed method shows suitability to be applied for the routine analysis of beverage samples.     

Spirostaphylotrichin W,a spirocyclic γ-lactam isolated from liquid culture of Pyrenophora semeniperda, a potential mycoherbicide for cheatgrass (Bromus tectorum) biocontrol

A novel spirocyclic γ-lactam, named spirostaphylotrichin W (1), was isolated together with the well known and closely related spirostaphylotrichins A, C, D, R and V, as well as triticone E, from the liquid cultures of Pyrenophora semeniperda (anamorph: Drechslera), a seed pathogen proposed for cheatgrass (Bromus tectorum) biocontrol. Spirostaphylotrichin W was characterized as (3S*,4S*,5S*,6S*,9Z,10Z)-4,6-dihydroxy-2,3-dimethoxy-3-methyl-10-propyliden-2-azaspiro [4.5]dec-8-ene-1,7-dione, by spectroscopic and chemical methods. The relative stereochemistry of spirostaphylotrichin W was assigned using NOESY experiments and in comparison to those of spirostaphylotrichin V (2) and triticone E (6). In fact, the relative stereochemistry at C-3 was the same of that of 2, while that at C-4 and C-6 was inverted in respect to that reported, respectively, for 2 and 6. In a B. tectorum coleoptile bioassay at concentration of 10⁻³, spirostaphylotrichin A proved to be the most active compound, followed by spirostaphylotrichins C and D. Spirostaphylotrichin W and V showed mild toxicity while spirostaphylotrichin R and triticone E were not active. When tested on host and non-host plants by leaf puncture bioassay, spirostaphylotrichins A, C and D caused the appearance of necrotic spots while the other compounds were inactive.     

X-ray microfluorescence (μXRF) imaging of Aspergillus nidulans cell wall mutants reveals biochemical changes due to gene deletions

We used synchrotron X-ray fluorescence to create the first semiquantitative, submicron resolution, element distribution maps of P, S, K, and Ca, in situ, in fungal samples. Data collection was performed at the European Synchrotron Radiation Facility beam line ID21, Grenoble, France. We studied developing hyphae, septa, and conidiophores in Aspergillus nidulans, comparing wild type and two cell wall biosynthesis gene deletion strains. The latter encode sequential enzymes for biosynthesis of galactofuranose, a minor wall carbohydrate. Each gene deletion caused hyphal morphogenesis defects, and reduced both colony growth and sporulation 500-fold. Elemental imaging has helped elucidate biochemical changes in the phenotype induced by the gene deletions that were not apparent from morphological examination. Here, we examined S as a proxy for protein content, P for nucleic acid content, as well as Ca and K, which also have important metabolic roles. Element distributions in wild-type fungi reflect biological aspects already known or expected from other types of analysis; however, the application of X-ray fluorescence (XRF) imaging reveals aspects of gene deletion phenotypes that were not previously available. We have demonstrated that deleting a dispensable gene involved in galactose metabolism (ugeA) and one involved in biosynthesis of a minor cell wall component (ugmA) led to changes in hyphal elemental distribution that may have resulted from compromised wall composition.     

Gravity-free hydraulic jumps and metal femtoliter cups

Hydraulic jumps created by gravity are seen everyday in the kitchen sink. We show that at small scales a circular hydraulic jump can be created in the absence of gravity by surface tension. The theory is motivated by our experimental finding of a height discontinuity in spreading submicron molten metal droplets created by pulsed-laser ablation. By careful control of initial conditions, this leads to solid femtoliter cups of gold, silver, copper, niobium, and tin.     

Simultaneous acquisition of magnetic resonance spectroscopy (MRS) data and positron emission tomography (PET) images with a prototype MR-compatible, small animal PET imager

Multi-modality imaging (such as PET-CT) is rapidly becoming a valuable tool in the diagnosis of disease and in the development of new drugs. Functional images produced with PET, fused with anatomical images created by MRI, allow the correlation of form with function. Perhaps more exciting than the combination of anatomical MRI with PET, is the melding of PET with MR spectroscopy (MRS). Thus, two aspects of physiology could be combined in novel ways to produce new insights into the physiology of normal and pathological processes. Our team is developing a system to acquire MRI images and MRS spectra, and PET images contemporaneously. The prototype MR-compatible PET system consists of two opposed detector heads (appropriate in size for small animal imaging), operating in coincidence mode with an active field-of-view of approximately 14 cm in diameter. Each detector consists of an array of LSO detector elements coupled through a 2-m long fiber optic light guide to a single position-sensitive photomultiplier tube. The use of light guides allows these magnetic field-sensitive elements of the PET imager to be positioned outside the strong magnetic field of our 3T MRI scanner. The PET scanner imager was integrated with a 12-cm diameter, 12-leg custom, birdcage coil. Simultaneous MRS spectra and PET images were successfully acquired from a multi-modality phantom consisting of a sphere filled with 17 brain relevant substances and a positron-emitting radionuclide. There were no significant changes in MRI or PET scanner performance when both were present in the MRI magnet bore. This successful initial test demonstrates the potential for using such a multi-modality to obtain complementary MRS and PET data.     

S=1/2 One‐Dimensional Random‐Exchange Ferromagnetic Zigzag Ladder,Which Exhibits Competing Interactions in a Critical Regime

The synthesis, crystal structure, and magnetic properties (from a combined experimental and First‐Principles Bottom‐Up theoretical study) of the new compound catena‐dichloro(2‐Cl‐3Mpy)copper(II), 1 , [2‐Cl‐3Mpy=2‐chloro‐3‐methylpyridine] are described and rationalized. Crystals of 1 present well isolated magnetic 1D chains (no 3D order was experimentally observed down to 1.8 K) and magnetic frustration stemming from competing ferromagnetic nearest‐neighbor (J_NN) interactions and antiferromagnetic next‐nearest neighbor (J_NNN) interactions, in which α=J_NNN/J_NN <?0.25. These magnetic interactions give rise to a unique magnetic topology: a two‐leg zigzag ladder composed of edge‐sharing up‐down triangles with antiferromagnetic interactions along the rails and ferromagnetic interactions along the zigzag chain that connects the rails. Crystals of 1 also present a random distribution of the 2‐Cl‐3Mpy groups, which are arranged in two different orientations, each with a 50 % occupancy. This translates into a random static structural disorder within each chain by virtue of which the value of the J_NN magnetic interactions can randomly take one of the following three values: 53, 36, and 16 cm^?1. The structural disorder does not affect the J_NNN value, which in all cases is approximately ?9 cm^?1. A proper statistical treatment of this disorder provides a computed magnetic susceptibility curve that reproduces the main features of the experimental data.     

Racemic and Quasi‐Racemic X‐ray Structures of Cyclic Disulfide‐Rich Peptide Drug Scaffolds

Cyclic disulfide‐rich peptides have exceptional stability and are promising frameworks for drug design. We were interested in obtaining X‐ray structures of these peptides to assist in drug design applications, but disulfide‐rich peptides can be notoriously difficult to crystallize. To overcome this limitation, we chemically synthesized the L ‐ and D ‐forms of three prototypic cyclic disulfide‐rich peptides: SFTI‐1 (14‐mer with one disulfide bond), cVc1.1 (22‐mer with two disulfide bonds), and kB1 (29‐mer with three disulfide bonds) for racemic crystallization studies. Facile crystal formation occurred from a racemic mixture of each peptide, giving structures solved at resolutions from 1.25 Å to 1.9 Å. Additionally, we obtained the quasi‐racemic structures of two mutants of kB1, [G6A]kB1, and [V25A]kB1, which were solved at a resolution of 1.25 Å and 2.3 Å, respectively. The racemic crystallography approach appears to have broad utility in the structural biology of cyclic peptides.