Antihypertensive Effect of Angiotensin‐Converting Enzyme Inhibitory Peptide Obtained from Hen Ovotransferrin

Angiotensin I‐converting enzyme (ACE) inhibitory peptide was isolated from the hen ovotransferrin hydrolysate using chymotryptic hydrolysis by two steps of reverse‐phase high‐performance liquid chromatography. The amino sequence of this novel peptide was identified as Lys‐Val‐Arg‐Glu‐Gly‐Thr‐Thr‐Tyr that inhibited ACE activity in vitro in a concentration‐dependent manner with an effective concentration (IC₅₀) of 102.8 μM. Also, this inhibition was identified as noncompetitive using the Lineweaver‐Burk plot. Moreover, the antihypertensive action of this novel peptide was investigated by an intravenous injection into spontaneously hypertensive rats (SHR). A dose‐dependent reduction of systolic blood pressure by this peptide was observed after 40 min of treatment and it decreased the blood pressure markedly at the maximal dose (1 nmol/mL/kg). The maximal blood pressure lowering activity of this peptide was calculated as 163% of captopril (10 pmol/mL/kg) that was used as positive control. In conclusion, the obtained data suggests that Lys‐Val‐Arg‐Glu‐Gly‐Thr‐Thr‐Tyr has an ability to inhibit ACE activity and decrease the systolic blood pressure in hypertensive animals.     

Enhancing the organic dye adsorption on porous xerogels

We investigate the adsorption of four different organic dyes (i.e., methyl orange, alizarin red S, brilliant blue FCF, and phenol red) on porous xerogels. To understand the factors affecting the adsorption capacity of the xerogels, we vary the hydrophobicity and the textural properties of the xerogels as well as the solution pH. We control the hydrophobicity by mixing two different precursors (i.e., vinyltriethoxysilane (VTES) and tetraethoxysilane (TEOS)) and the textural properties by using cetyltrimethylammonium bromide (CTAB) as a templating agent. We find that the adsorption capacity is enhanced as the organic/inorganic hybrid xerogel or the templated xerogel is used instead of the purely inorganic or the untemplated xerogel. In all the cases studied, adsorption decreases as the pH is increased due to the electrostatic repulsion between the dyes and the xerogel surface. We find that both the hydrophobic surface and larger pore size/volume are required to enhance the adsorption capacity significantly.     

An ultraviolet-curable mold for sub-100-nm lithography

We describe a novel UV-curable mold that is stiff enough for replicating dense sub-100-nm features even with a high aspect ratio. It also allows for flexibility when the mold is prepared on a flexible support such that large area replication can be accomplished. The composite material of the mold is inert to chemicals and solvents. The surface energy is made low with a small amount of releasing agent such that the mold can be removed easily and cleanly after patterning. In addition, the material allows self-replication of the mold. These unique features of the mold material should make the mold quite useful for various patterning purposes.     

Synthesis of 4-acetylisocoumarin: first total syntheses of AGI-7 and sescandelin

A practical synthetic route to 4-acetylisocoumarins and the first total synthesis of AGI-7 (5) and sescandelin (4) are described. The readily available homophthalate 8 was transformed to the vinylogous amide ester 13 in high overall yield. Upon treatment of 13 with refluxing aqueous formic acid, the desired 4-acetylisocoumarin (5) and its regioisomer 3-methyl-4-formylisocoumarin (17) were produced in a 3:1 ratio. After separation of the desired product (5) from the unwanted minor isomer, the enantioselective reduction of AGI-7 by borane in the presence of Corey's (S)-oxazaborolidine reagent afforded (+)-sescandelin (4) with a 93% ee.     

Syntheses of polyurethanes derived from oximes and their photodegradation

Polyoxime-urethanes have been synthesized from dioximes and diisocyanates, and their structures have been ascertained by elemental analysis and infrared spectroscopy. They can be represented by the general formula: These polymer films were photolyzed by using a high-pressure 100-W mercury lamp, and the rate of decomposition of the N? O bond was determined by use of ultraviolet and infrared spectra, or comparing the photochemical behavior with that of corresponding model compounds. Upon irradiating these polymers in the presence or absence of sensitizers or a hydrogen donor, there were obtained photolyzed polymers of low molecular weight, of which the molecular weights were estimated by observing the viscosity changes. To deduce the mechanism of photodegradation of polyoxime-urethane, photolysis of benzophenone oxime-phenyl urethane was investigated as a model compound.     

Chiral Phosphinophenyloxazolines Bearing Alkoxymethyl Substituents: Synthesis and Application in the Palladium Catalyzed Allylic Substitution Reactions

The chiral phosphine‐oxazoline ligands 3 and 4 bearing 4‐alkoxymethyl substituents on the oxazoline ring with (R)‐configuration were prepared from L‐serine methyl ester in 66% and 33% yields, respectively. Along this synthetic pathway, the β‐hydroxylamides derived from L‐serine methyl ester and 2‐halobenzoyl chlorides were expediently converted to the corresponding oxazolines by using diethylaminosulfur trifluoride as the activation agent. Potassium diphenylphosphide was the reagent of choice for replacing the bromine atom on the phenyl ring, giving the desired oxazoline‐phosphine ligands 3 and 4 . Together with [Pd(η³‐allyl)Cl]₂, ligands 3 and 4 induced an enantioselective allylic substitution reaction of 1,3‐diphenyl‐2‐pro‐penyl acetate by dimethyl malonate. Although ligands 3 and 4 exhibit the (R)‐configuration, differing from the (S)‐configuration of Pfaltz‐Helmchen‐Williams phosphine‐oxazoline ligands, all these ligands led to the same enantiotopic preference in the allylic substitution reaction. To facilitate the recovery and reuse of the phosphine‐oxazoline ligand, immobilization on Merrifield resin was attempted, albeit in low loading.     

Biomimetic alcohol oxidations by an iron(III) porphyrin complex: relevance to cytochrome P-450 catalytic oxidation and involvement of the two-state radical rebound mechanism

The systematic oxidation reactions of a wide range of alcohols have been carried out by using an iron porphyrin complex in order to understand their relation to cytochrome P-450 enzymes and to have a practical application to organic synthesis. The iron porphyrin complex catalyzed efficiently alcohol oxidation to the respective carbonyl compound via a high-valent iron-oxo porphyrin intermediate ((Porp)Fe=O+). Several mechanistic studies such as isotope 18O labeling, deuterium isotope effect, linear free energy relationship, and ring-opening of radical clock substrate, have suggested that the alcohol is oxidized by a sequence of reactions involving an alpha-hydroxyalkyl radical intermediate and oxygen rebound to form the gem-diol, dehydration of which yields the carbonyl compounds. Moreover, it has been proposed that a two-state reactivity mechanism can also be adopted for alcohol oxidation reactions in iron porphyrin model systems as exhibited by P-450 enzymes.     

Redetermination of (6R,7S,9S,11S)‐(–)‐sparteinium monoperchlorate

The structure of the title compound, C₁₅H₂₇N₂⁺·ClO₄^?, consists of a monoprotonated sparteinium cation and a perchlorate anion. The two tertiary N atoms of the cation, one perchlorate O atom and a H atom form a bifurcated hydrogen bond, the four hydrogen‐bonding atoms being nearly in the same plane.     

Bioconversion of cellulose into ethanol by nonisothermal simultaneous saccharification and fermentation

The kinetic characteristics of cellulase and beta-glucosidase during hydrolysis were determined. The kinetic parameters were found to reproduce experimental data satisfactorily and could be used in a simultaneous saccharification and fermentation (SSF) system by coupling with a fermentation model. The effects of temperature on yeast growth and ethanol production were investigated in batch cultures. In the range of 35-45 degrees C, using a mathematical model and a computer simulation package, the kinetic parameters at each temperature were estimated. The appropriate forms of the model equation for the SSF considering the effects of temperature were developed, and the temperature profile for maximizing the ethanol production was also obtained. Briefly, the optimum temperature profile began at a low temperature of 35 degrees C, which allows the propagation of cells. Up to 10 h, the operating temperature increased rapidly to 39 degrees C, and then decreased slowly to 36 degrees C. In this nonisothermal SSF system with the above temperature profile, a maximum ethanol production of 14.87 g/L was obtained.     

Isolation of essential oils from tobacco by gas co-distillation/solvent extraction

Summary The essential oils have been isolated from tobacco leaves using a simple gas co-distillation apparatus. The method involves co-distillation with water under the continuous stream of an inert gas with subsequent single solvent extraction of the distillate. The extract is analysed on GC and GC/MS in splitless injection mode without further concentration. The method was evaluated for reproducibility using n-octadecane as an internal standard. The distillation-extraction procedure was reporducible with an average deviation of ±3% for the major constituents. The present method was applied to the analyses of the essential oils of other agricultural products.Dedicated to Dr. L. S. Ettre on the occasion of his 60th birthday.