Hydrothermal Synthesis and Optical Properties of ZnO Nanostructured Films Directly Grown from/on Zinc Substrates

Uniform ZnO nanorods arrays are grown directly from and on Zn foils in pure water under hydrothermal conditions at a relatively low temperature. The nanorods are 80–200 nm in diameter and ∼ 1 μm in length, which grow on the Zn foil along the [001] direction. By changing the pure water to a urea solution, a Zn compound ([Zn₅(OH)₆(CO₃)₂], a precursor of ZnO nanoflowers film, is created by self-assembly. The ZnO nanoflowers film can be easily obtained by heating the [Zn₅(OH)₆(CO₃)₂] compound in N₂ at 350∘C for 5–6 hours. Possible growth processes of the ZnO nanorods arrays and the [Zn₅(OH)₆(CO₃)₂] nanoflowers are discussed. Photoluminescence properties of the as-prepared ZnO nanostructures have been measured. The ZnO nanorods array synthesized using our method has minimal defects so that only band-gap emission is observed. However, the ZnO nanoflowers film, obtained by heating the [Zn₅(OH)₆(CO₃)₂] nanoflower precursor in N₂, is polycrystalline and displays strong defect-related emission.     

On-line nanoliter cycle sequencing reaction with capillary zone electrophoresis purification for DNA sequencing

An integrated system for DNA sequencing based on a nanoreactor for cycle-sequencing reaction coupled with on-line capillary zone electrophoresis (CZE) for purification and capillary gel electrophoresis (CGE) for separation is presented. Less than 100 nl of premixed reagent solution, which includes dye-labeled terminator pre-mix, bovine serum albumin and template, was hydrodynamically injected into a fused-silica capillary (75 microm I.D.) inside a laboratory-made microthermocycler for cycle sequencing reaction. In the same capillary, the reaction products were purified by CZE followed by on-line injection of the DNA fragments into another capillary for CGE. Over 540 base pairs (bp) of DNA can be separated and the bases called for single-standed DNA with 0.9% error rate. The total time was about 3.5 h, or a cycle time of 2 h with staggered operation. For double-stranded DNA, a longer reaction time was required and base calling up to 490 bp with 1.2% error rate was achieved. The whole system is readily adaptable to automated multiplex operation for DNA sequencing or polymerase chain reaction analysis.     

Determination of in vitro permeability of drug candidates through a caco-2 cell monolayer by liquid chromatography/tandem mass spectrometry

Studying the permeability of compounds across a Caco-2 cell monolayer is an established in vitro model to screen for oral absorption and to evaluate the mechanism of transport. This assay can also be used to evaluate compounds as potential P-glycoprotein substrates and/or inhibitors. The traditional methods of sample analysis (high-performance liquid chromatography (HPLC) with a UV or fluorescence detector) limit the throughput and sensitivity of this assay. Data are presented here describing the use of liquid chromatography/tandem mass spectrometry (LC/MS/MS) for the analysis of samples derived from the Caco-2 cell studies. During the analysis an automatic switching valve was used to divert the flow from the HPLC column to waste for the first minute, preventing the early eluting salts from entering and contaminating the LC/MS interface. This approach allows the rapid and accurate determination of drug transport across the Caco-2 cell monolayer. The high sensitivity and specificity of LC/MS/MS make this technique an ideal candidate for the low concentration and high throughput routine analysis of Caco-2 cell solutions, especially if multiple compounds are administered and analyzed simultaneously. Thus, the use of LC/MS/MS will increase the value of the Caco-2 cell assay as an in vitro screening tool.     

Theoretical studies on the mechanism of acid-promoted hydrolysis of N-formylaziridine in comparison with formamide

[reaction: see text] We present an ab initio study of the acid-promoted hydrolysis reaction mechanism of N-formylaziridine in comparison with formamide. Since the rate of amide hydrolysis reactions depends on the formation of the tetrahedral intermediate, we focused our attention mainly on the reactant complex, the tetrahedral intermediate, and the transition state connecting these two stationary points. Geometries were optimized using the density functional theory, and the energetics were refined using ab initio theory including electron correlation. Solvent effects were investigated by using polarizable continuum method calculations. The proton-transfer reaction between the O-protonated and N-protonated amides was investigated. In acidic media, despite that the N-protonated species is more stable than the O-protonated one, it is predicted that both N-protonated and O-protonated pathways compete in the hydrolysis reaction of N-formylaziridine.     

Remarkable proteolytic activity of imidazoles attached to cross-linked polystyrene

The insoluble resins synthesized by attaching imidazoles to poly(chloromethylstyrene-co-divinylbenzene) effectively hydrolyzed albumin with half-life as short as 20 min at pH 7 and 25 degrees C. Thus, peptide hydrolysis was accomplished with imidazole in an artificial system for the first time. The imidazole-based artificial proteinases manifested optimum activity at pH 7-8. The proteolytic activity of the imidazole-based artificial proteinases exceeded that of previously reported organic artificial proteinases including catalytic antibodies. High proteolytic activity was observed when imidazole was attached to the resin through the C-2 atom instead of the N atom. The catalytic activity was greatly reduced when the content of imidazole was lowered. This indicates catalytic cooperation of at least two proximal imidazole moieties attached to the resin. Possible mechanisms for the effective protein hydrolysis by the proximal imidazoles are presented.     

A Novel Uranyl Complex with Dimeric Lacunary Polyoxoanion: [(A-α-SiW<Subscript>9</Subscript>O<Subscript>33</Subscript>)<Subscript>2</Subscript>K{UO<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)}<Subscript>2</Subscript>]<Superscript>11−</Superscript>

A novel uranyl complex with dimeric lacunary polyoxoanion like open-mouthed clam, Na₅[(A-α-SiW₉O₃₃H₃)₂K{UO₂(H₂O)}₂], was prepared and characterized by elemental analysis, infrared and ultraviolet–visible spectroscopy and single crystal X-ray diffraction. In the anion, two A-α-SiW₉O₃₄¹⁰⁻ groups share two terminal oxygen atoms O_d′ derived from removal of three corner-shared W atoms from saturated α-Keggin anion, forming a dimeric anion with an open mouth in which potassium ion and uranyl ions are coordinated. Uranium atom adopts a pentagonal bipyramidal geometry. The coordinating anions are linked by sodium ions via coordination of terminal or bridging oxygen atoms, forming two-dimensional layer arrangement. Between the layers are the hydrogen bonds from which a supramolecular architecture is created. UV–VIS spectrum gives W–O and U–O charge transfer transitions at 230–265 and 432 nm, showing the change of geometry of the polyanion and weakening of the U–O bonds of the uranyl cation. Electronic supplementary material The online version of this article () contains supplementary material, which is available to authorized users.     

Isolation of a potent anti-MRSA sesquiterpenoid quinone from Ulmus davidiana var. japonica

A highly potent anti-MRSA sesquiterpenoid has been isolated from Ulmus davidiana var. japonica, which has been traditionally used to treat infectious diseases in Korea. This naturally occurring antibiotic was identified as mansonone F (1). This compound has been found to be highly active specifically against MRSA and showed an MIC range of 0.39-3.13 microg/ml which is comparable to that of vancomycin.     

MMI作为铜的盐酸酸洗缓蚀剂作用机理的研究

用失重法研究了N-甲基-2-巯基咪唑（MMI）在5％盐酸中对铜的酸洗缓蚀性能.探讨了温度和MMI浓度对缓蚀效果的影响，从中得出了MMI在铜表面的吸附等温式，计算了吸附热及MMI的加入对铜在盐酸中腐蚀反应活化能的影响，进而探讨了MMI对铜缓蚀作用的机理.结果表明， 30 ℃下，在5％盐酸中，当MMI的浓度在3 mmol•L－1和8 mmol•L－1之间时,缓蚀率随MMI浓度的增加而迅速增加，当浓度达到8 mmol•L－1时，缓蚀率趋于定值，而当浓度小于3 mmol•L－1时， MMI的加入会加速铜的腐蚀；吸附在铜表面的MMI分子间的作用力整体表现为引力； MMI在铜表面的吸附是吸热反应； MMI的加入降低了铜的腐蚀反应活化能.     

Investigation of methods suitable for the matrix-assisted laser desorption/ionization mass spectrometric analysis of proteins from ribonucleoprotein complexes

A variety of protein isolation and purification techniques for ribonucleoprotein (RNP) complexes were investigated for their compatibility with downstream analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Ribosomal proteins from Escherichia coli 70S ribosomes were obtained using methods such as phenol extraction and precipitation by organic solvents or acids. Under optimal conditions, more than 90% of the expected ribosomal proteins were detected in a single MALDI-MS experiment. The most effective approach combined ribosome denaturation by buffer exchange with acid precipitation of the ribosomal ribonucleic acids. An improved acid precipitation approach, involving the sequential additions of acetic and trifluoroacetic acid, yielded more complete protein coverage while minimizing loss of ion signal from lower molecular weight proteins. With phenol extraction, substantial gains in ion abundance of higher molecular weight proteins are noted, although some of the lower molecular weight proteins were not efficiently extracted. These results illustrate several effective approaches for protein isolation from protein complexes such as RNPs that are MALDI-MS compatible, and these approaches should extend the use of MALDI-MS for proteomics-based analyses of other protein-nucleic acid complexes.     

Two organometallic fragments inclusioned in a 1,3-alternate calix[4]arene tetraphosphane: evidence for transition metal-arene interaction through the cavity

The preparation of an 1,3-alternate calix[4]arene tetraphosphane ligand, 25,26,27,28-tetrakis{2-(diphenylphosphino)ethoxy}calix[4]arene (4), is described. Ligand 4 is obtained in four steps in 17% overall yield. Reaction of 4 with AgBF4 produced the encapsulated two silver complex [Ag2{(P,P,P,P)-tetraphencalix[4]arene}](BF4)2. The solid-state structure shows that the encapsulated silver undergoes a substantial pi-interaction by two opposite arene rings. Rhodation of 4 employing [Rh(cot)2]BF4 yielded the encapsulated complex with a bent coordination mode. Two organometallic fragments inclusioned inside a 1,3-alternate calix[4]arene tetraphosphane was also achieved by the reaction of 4 with [PtH(PPh3)2 (thf)]+. Full characterization includes X-ray structural studies of compounds 4-6.