Design of Sensitive Biocompatible Quantum‐Dots Embedded in Mesoporous Silica Microspheres for the Quantitative Immunoassay of Human Immunodeficiency Virus‐1 Antibodies

A novel sandwich‐type electrochemiluminescence (ECL) immunosensor was developed to enable the sensitive detection of HIV‐1 antibodies. This system incorporated mesoporous silica (mSiO₂) complexed with quantum dots (QDs) and nano‐gold particles, which were assembled to enhance signal detection. Magnetic beads were used by immobilizing the secondary anti‐IgG antibody. This was first employed to capture HIV‐1 antibody (Ab) to form a Fe₃O₄/anti‐IgG/Ab complex. A high loading and signal‐enhanced nanocomposite (hereafter referred to as Au‐mSiO₂‐CdTe) was used as a HIV‐1 antigen label. The Au‐mSiO₂‐CdTe nanocomposite was conjugated with the Fe₃O₄/anti‐IgG/Ab complex to form an immunocomplex (hereafter referred to as Fe₃O₄/anti‐IgG/Ab/HIV‐1/CdTe‐mSiO₂‐Au). This complex could be further separated by an external magnetic field to produce ECL signals. Due to the large specific surface area and pore volume of mSiO₂, the loading of the CdTe QDs was markedly increased. Thus, the loaded QDs released a powerful chemiluminescent signal with a concordantly increased sensitivity of the immunosensor. The immunosensor was highly sensitive, and displayed a linear range of responses for HIV‐1 antibody across a dilution range of 1 : 1500 through 1 : 50 with the detection limit of 1 : 4500. The immunoassay can be a promising candidate in early diagnosis of HIV infection.     

Novel moving reaction boundary-induced stacking and separation of human hemoglobins in slab polyacrylamide gel electrophoresis

We developed a novel polyacrylamide gel electrophoresis (PAGE) method to stack and separate human hemoglobins (Hbs) based on the concept of moving reaction boundary (MRB). This differs from the classic isotachophoresis (ITP)-based stacking PAGE in the aspect of buffer composition, including the electrode buffer (pH 8.62 Tris–Gly), sample buffer (pH 6.78 Tris–Gly), and separation buffer (pH 8.52 Tris–Gly). In the MRB-PAGE system, a transient MRB was formed between alkaline electrode buffer and acidic sample buffer, being designed to move toward the anode. Hbs carried partial positive charges in the sample buffer due to its pH below pI values of Hbs, resulting in electromigrating to the cathode. Hbs would carry negative charges quickly when migrated into the alkaline electrode buffer and be transported to the anode until meeting the sample buffer again. Thus, Hbs were stacked within a MRB until the transient MRB reached the separation buffer and then separated by zone electrophoresis with molecular sieve effect of the gel. The experimental results demonstrated that there were three clear and sharp protein zones of Hbs (HbA_1c, HbA₀, and HbA₂) in MRB-PAGE, in contrast to only one protein zone (HbA₀) in ITP-PAGE for large-volume loading (≥15 μl), indicating high stacking efficiency, separation resolution, and good sensitivity of MRB-PAGE. In addition, MRB-PAGE was performed in a conventional slab PAGE device, requiring no special device. Thus, it could be widely used in separation and analysis of diluted protein in a standard laboratory.

2,3‐Di(2‐pyridyl)‐5‐phenylpyrazine: A NN‐CNN‐Type Bridging Ligand for Dinuclear Transition‐Metal Complexes

A new bridging ligand, 2,3‐di(2‐pyridyl)‐5‐phenylpyrazine (dpppzH), has been synthesized. This ligand was designed so that it could bind two metals through a NN‐CNN‐type coordination mode. The reaction of dpppzH with cis‐[(bpy)₂RuCl₂] (bpy=2,2′‐bipyridine) affords monoruthenium complex [(bpy)₂Ru(dpppzH)]²⁺ ( 12+ ) in 64 % yield, in which dpppzH behaves as a NN bidentate ligand. The asymmetric biruthenium complex [(bpy)₂Ru(dpppz)Ru(Mebip)]³⁺ ( 23+ ) was prepared from complex 12+ and [(Mebip)RuCl₃] (Mebip=bis(N‐methylbenzimidazolyl)pyridine), in which one hydrogen atom on the phenyl ring of dpppzH is lost and the bridging ligand binds to the second ruthenium atom in a CNN tridentate fashion. In addition, the RuPt heterobimetallic complex [(bpy)₂Ru(dpppz)Pt(C?CPh)]²⁺ ( 42+ ) has been prepared from complex 12+ , in which the bridging ligand binds to the platinum atom through a CNN binding mode. The electronic properties of these complexes have been probed by using electrochemical and spectroscopic techniques and studied by theoretical calculations. Complex 12+ is emissive at room temperature, with an emission λ_max=695 nm. No emission was detected for complex 23+ at room temperature in MeCN, whereas complex 42+ displayed an emission at about 750 nm. The emission properties of these complexes are compared to those of previously reported Ru and RuPt bimetallic complexes with a related ligand, 2,3‐di(2‐pyridyl)‐5,6‐diphenylpyrazine.     

Sulfonated carbon catalyzed oxidation of aldehydes to carboxylic acids by hydrogen peroxide

Sulfonated carbon as a strong and stable solid acid catalyst exhibited excellent catalytic performance in various acid-catalyzed reactions. Here, sulfonated carbon, as catalyst for oxidation reaction, was prepared via the carbonization of starch followed by sulfonation with concentrated sulfuric acid. N₂ physisorption, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray fluorescence and acid-base titration were used to characterize the obtained materials. The catalytic activity of sulfonated carbon was studied in the oxidation of aldehydes to carboxylic acids using 30 wt% H₂O₂ as oxidant. This oxidation protocol works well for various aldehydes including aromatic and aliphatic aldehydes. The sulfonated carbon can be recycled for three times without obvious loss of activity.     

Structure and Activity of RNase A in Sodium Dodecyl Sulphate Solutions

The structure and activity of RNase A in sodium dodecyl sulphate solutions were investigated at 25.0±0.1 and pH 7.00. The results show that with increasing sodium dodecyl sulphate concentration, the structure of RNase A is collapsed gradually, however, the activity of RNase A is first increased and then decreased. This is mainly due to the different effect of SDS at different SDS concentration.     

Microstructure, distribution and properties of conductive polypyrrole/cellulose fiber composites

Highly intrinsic conductive polypyrrole/cellulose fiber composites (CF) were successfully prepared through in situ chemical oxidation polymerization simply by increasing fiber concentration at the same dosage of pyrrole, oxidant and dopant (based on the weight of dry fiber). FeCl₃ and anthraquinone-2-sulfonic acid sodium salt (AQSNa) were utilized as oxidant and dopant. As fiber concentration increased from 1 % (CF1) to 20 % (CF20), N and S content increased from 0.24 and 0.25 % to 1.24 and 0.89 %, and great increase in the retention of PPy and AQSNa was confirmed by elemental analysis. In addition, on the surface of conductive fiber, PPy of compact fibroid structure was detected instead of interconnected globular structure at higher fiber concentration. Furthermore, scanning transmission electron microscope and X-ray photoelectron spectroscopy (XPS)-depth profile analysis demonstrated denser and more uniformly distributed PPy inside fiber wall for CF20, while PPy tended to deposit on the surface of fiber for CF1. Fourier transform infrared spectroscopy, together with XPS certified that the PPy with longer conjugation length and higher doping level across the conductive fiber was obtained at higher fiber concentration. The doping level for CF10 decreased from 21.55 to 16.39 % with increasing fiber wall thickness, while that of CF20 decreased slightly from 30.73 to 24.10 %. The resulting CF20 showed lowest surface resistivity of 0.433 KΩ/square, as well as improved electro-conductivity stability. The incorporation of more PPy in CF improved the thermal stability.     

Codimension-4 resonant homoclinic bifurcations with orbit flips and inclination flips

The paper studies a codimension-4 resonant homoclinic bifurcation with one orbit flip and two inclination flips, where the resonance takes place in the tangent direction of homoclinic orbit.Local active coordinate system is introduced to construct the Poincar′e returning map, and also the associated successor functions. We prove the existence of the saddle-node bifurcation, the perioddoubling bifurcation and the homoclinic-doubling bifurcation, and also locate the corresponding 1-periodic orbit, 1-homoclinic orbit, double periodic orbits and some 2n-homoclinic orbits.     

4,5-Dicyanoimidazole-promoted synthesis of dinucleoside polyphosphates and their analogs

A general and efficient P(V)–N activation method for the preparation of symmetrical and asymmetrical dinucleoside polyphosphates (Np_nN′s, n=2–4) and P²,P³-CX₂-dinucleoside tetraphosphates (X=H, F, and Cl) has been established. Twenty-two dinucleoside polyphosphates and their phosphonate analogs were synthesized from nucleoside 5′-phosphoropiperidates with 4,5-dicyanoimidazole as the activator in good to high yields.     

Effect of Water Fraction on Rheological Properties of Waxy Crude Oil Emulsions

This article discusses the effect of water fraction on the rheological properties of waxy crude oil emulsions including gel point, yield stress, viscosity, and thixotropy. The experimental results reveal that the rheological behaviors of the w/o emulsion samples all intensify with the increase of water volume fraction within 60%. Of more significance is that a correlation for w/o emulsions between yield stress and water volume fraction is put forward with an average relative error of 6.75%. In addition, some mainstream viscosity prediction models of w/o emulsions are evaluated, and Elgibaly model is the best-fit for the emulsions in this study.     

骨架环肽的化学合成研究进展

骨架环肽是线性肽的C端和N端通过酰胺键进行首尾环合而形成的环状分子.研究者从细菌、真菌、植物和动物中发现了大量的骨架环肽.这种首尾环合的结构,使得骨架环肽具有很好的酶稳定性、热稳定性和化学稳定性,部分骨架环肽具有细胞膜通透性.骨架环肽分子异常的稳定性和高效的生物活性,使得其成为目前药物领域的研究热点.为了更深入地研究它们的结构和功能,骨架环肽的制备成为一个重要问题.概述了化学合成骨架环肽的一些方法,包括:(1)固相环合策略;(2)液相环合策略;(3)分子内自然化学连接策略,并对这些方法的特点和效率进行了讨论比较.