Vector piezoresponse force microscopy.

A novel approach for nanoscale imaging and characterization of the orientation dependence of electromechanical properties-vector piezoresponse force microscopy (Vector PFM)-is described. The relationship between local electromechanical response, polarization, piezoelectric constants, and crystallographic orientation is analyzed in detail. The image formation mechanism in vector PFM is discussed. Conditions for complete three-dimensional (3D) reconstruction of the electromechanical response vector and evaluation of the piezoelectric constants from PFM data are set forth. The developed approach can be applied to crystallographic orientation imaging in piezoelectric materials with a spatial resolution below 10 nm. Several approaches for data representation in 2D-PFM and 3D-PFM are presented. The potential of vector PFM for molecular orientation imaging in macroscopically disordered piezoelectric polymers and biological systems is discussed.     

On the number of guard edges of a polygon

This paper establishes tight bounds on the number of edges of a polygon from which every point in the polygon is visible; we call them guard edges. For a nonstarshaped polygon, there can be at most three guard edges. For a polygon with holes, there may be at most six; three on the outer boundary and three on one of the holes. The results give new insights into the structure of visibility in polygons and shed light on developing an efficient algorithm for finding all guard edges of a polygon with or without holes. This work was partially supported by the Korea Science and Engineering Foundation (Project No. 91-01-01).     

Manufacturing planning and control: The evolution of MRP and JIT integration

Material Requirements Planning (MRP) and Just-in-Time (JIT) system are directed toward planning and controlling the important characteristics of material flow: how much of what materials flow and when. Since the material flow is at the heart of the manufacturing firm, MRP and JHT are the powerful management tools that could determine the success or failure of an entire manufacturing system. One of the strongest debates in manufacturing has been centered on the performance comparison and compatibility of JIT production system to the existing MRP. The primary intent of this research is to provide an overview of the manufacturing planning and control environment associated with MRP and JIT. Classifying the existing MRP/JIT comparison and integration literature, two different perspectives on MRP/JIT are discussed, and future research area is proposed based on the taxonomy.     

Change of Color Appearance in Photopic,Mesopic and Scotopic Vision

Mesopic vision describes a range of light levels where vision is mediated by both cones and rods. The appearance of color in mesopic vision differs drastically from that in photopic vision, where only cones mediate visual information. We used a haploscopic color matching technique to investigate the color appearance under various illuminance levels, ranging from photopic to scotopic via mesopic levels. The observers did color matching between a test color chip under various illuminance levels and a matching color stimulus presented on the Cathode-Ray Tube (CRT) display under the photopic illuminance condition. The results showed that not only chroma and lightness but hue of most color chips changed with illuminance. The manner of the hue changed depended on the color of the test chip, while matching points approached a neutral gray with decrease in illuminance level for all test chips. Chroma reduced continuously with decrease of the illuminance level until 0.1 lx for reddish and yellowish color chips or until 1 lx for greenish and bluish ones. Beyond those illuminance levels, chroma was approximately constant. Lightness decreased with decreasing illuminance level for all test chips except bluish color chips, for which lightness did not decrease much in general and even increased in some cases as predicted by the Purkinje shift. The experimental results obtained in the present study provide critical features that should be considered in predicting the appearance of color at low light levels.     

Auger spectroscopy and properties of Ir(Pt)/PZT(PZT/PT)/Ir nanosized thin-film structures

Studies of the elemental distribution profiles through the thickness of thin-film ferroelectric capacitor structures using Auger spectroscopy made it possible to establish the relation between the elemental and phase composition of the structures, on the one hand, and their electrophysical properties, on the other. Special features were observed in the behavior of the lead titanate underlayer both in the as-fabricated and aged structures. It is shown that the variation in the characteristics of the capacitor structures during aging is caused by diffusion of the elements at the interfaces and in the PZT film against a background of a significant increase in the oxygen concentration. As a result, interface-modifying oxide layers form and the trap density on the upper and lower interfaces decreases in all samples.     

Effects of anodizing conditions on bond strength of anodically oxidized film to titanium substrate

The bond strength of the oxide film to the titanium substrate and its inherent structural characteristics are very important preconditions for the success of titanium implants. The purpose of this study was to evaluate the micro-morphologies, crystalline structures, and bond strengths of the anodically oxidized films formed on titanium with the variation of electrolytes and applied current densities. In contrast to the specimens produced using sulfuric acid as the electrolyte, those produced using phosphoric acid showed quite different shapes and densities of the pores as the applied current densities were varied. The oxide films anodized in sulfuric acid consisted of anatase and rutile TiO₂, whileTiP₂O₇ was predominantly formed on the Ti surfaces anodized using phosphoric acid as the electrolyte. The oxide films, which did not experience spark deposition showed amorphous shape and their bond strengths were significantly lower than those of the other groups (p < 0.05). Those specimens which experienced initial spark deposition with a low current condition showed the highest bond strengths (34.2 MPa) within each electrolyte sub-set. The growing rates of the oxide film thicknesses in relation to the electric current changes varied according to the type of electrolyte, and the oxide film thickness influenced the bond strength.     

Imaging characterization of carbon nanotube tips modified using a focused ion beam

A carbon nanotube (CNT) tip, which assembled on the sharp end of a Si tip by dielectrophoresis, was structurally modified using focused ion beam (FIB). We described the imaging characterization of the FIB-modified CNT tip in noncontact AFM mode in terms of wear, deep trench accessibility, and imaging resolution. Compared to a conventional Si tip, the FIB-modified CNT tip was superior, especially for prolonged scanning over 10 h. We conclude that modified CNT tips have the potential to obtain high-quality images of nanoscale structures.     

C-band continuously tunable lasers using tunable fiber Bragg gratings

We report the development of a ring tunable fiber laser based on tunable fiber Bragg gratings (TFBG) integrated with an optical circulator. The TFBG is embedded inside a 3-piont bending device for wavelength tuning. The tunable laser operating in the C-band has power variation, tuning resolution, tuning range and laser line width of ±0.5 dB, 0.5 nm, 25.0 nm and less than 0.05 nm, respectively. As 40 mW of pump power is used, the ring tunable laser has a side mode suppression ratio of 60 dB and a power conversion efficiency of 25%. These specifications ensure the high-quality operation of a tunable laser.     

Frequency stabilization of multiple semiconductor lasers using digital feedback loop

We propose and demonstrate a simple technique to stabilize the frequencies of multiple semiconductor lasers simultaneously using a Fabry-Perot etalon filter and a digital signal processing. Unlike other stabilization techniques, the proposed technique could stabilize DFB lasers using only one digital feedback control loop. The result shows that the proposed technique could maintain the frequency stability of 16 DFB lasers within ±150 MHz.