Experimental and molecular modeling investigation of (E)-N-{2-[(2-hydroxybenzylidene)amino]phenyl}benzenesulfonamide

The Schiff base compound (E)-N-{2-[(2-hydroxybenzylidene)amino]phenyl}benzenesulfonamide has been synthesized and characterized by IR, NMR and Uv-vis spectroscopies, and single-crystal X-ray diffraction technique. In addition, quantum chemical calculations employing density functional theory (DFT) method with the 6–311++G(d,p) basis set were performed to study the molecular, spectroscopic and some electronic structure properties of the title compound, and the results were compared with the experimental findings. There exists a good correlation between experimental and theoretical data. Enol-imine/keto-amine tautomerization mechanism was investigated in the gas phase and in solution phase using the polarizable continuum model (PCM) approximation. The energetic and thermodynamic parameters of the enol-imine?→?keto-amine transfer process show that the single proton exchange is thermodynamically unfavored both in the gas phase and in solution phase. However, the reverse reaction seems to be feasible with a low barrier height and is supported by negative values in enthalpy and free energy changes both in the gas phase and in solution phase. The solvent effect is found to be sizable with increasing polarity of the solvents for the reverse reaction. The predicted nonlinear optical properties of the compound are found to be much greater than those of urea.     

On Suborbital Graphs for the Extended Modular Group {\hat{\Gamma}}

In this paper, we show that the extended modular group ${\hat{\Gamma}}$ acts on ${\hat{\mathbb{Q}}}$ transitively and imprimitively. Then the number of orbits of ${\hat{\Gamma} _{0}(N)}$ on ${\hat{\mathbb{Q}}}$ is calculated and compared with the number of orbits of ${\Gamma _{0}(N)}$ on ${\hat{\mathbb{Q}}}$ . Especially, we obtain the graphs ${\hat{G}_{u, N}}$ of ${\hat{\Gamma}_{0}(N)}$ on ${\hat{\mathbb{Q}}}$ , for each ${N\in\mathbb{N}}$ and each unit ${u \in U_{N} }$ , then we determine the suborbital graph ${\hat{F}_{u,N}}$ . We also give the edge conditions in ${\hat{G}_{u, N}}$ and the necessary and sufficient conditions for a circuit to be triangle in ${\hat{F}_{u, N}.}$      

An approximation to the cross sections of Z l boson production at CLIC by using neural networks

In this work, the possible dynamics associated with leptophilic Z _l boson at CLIC (Compact Linear Collider) have been investigated by using artificial neural networks (ANNs). These hypotetic massive boson Z _l have been shown through the process e ⁺ e ^?→µ⁺µ^?. Furthermore, the invariant mass distributions for final muons have been consistently predicted by using ANN. For these highly non-linear data, we have constructed consistent empirical physical formulas (EPFs) by appropriate feed-forward ANN. These ANNEPFs can be used to derive further physical functions which could be relevant to studying Z _l .     

On the lifetime behavior of a discrete time shock model

In this article, we study a shock model in which the shocks occur according to a binomial process, i.e. the interarrival times between successive shocks follow a geometric distribution with mean 1/p$1/p$. According to the model, the system fails when the time between two consecutive shocks is less than a prespecified level. This is the discrete time version of the so-called δ$\delta$-shock model which has been previously studied for the continuous case. We obtain the probability mass function and probability generating function of the system’s lifetime. We also present an extension of the results to the case where the shock occurrences are dependent in a Markovian fashion.     

Chiral Aggregates of Triphenylamine‐Based Dyes for Depleting the Production of Hydrogen Peroxide in the Photochemical Water‐Splitting Process

Recent studies on water‐splitting photoelectrochemical cells (PECs) have demonstrated the intriguing possibility of controlling the spin state in this chemical reaction to form H₂ and O₂ by exploiting the chirality of organic π‐conjugated supramolecular polymers. Although this fascinating phenomenon has been disclosed, the chiral supramolecular materials reported thus far are not optimized for acting as efficient photosensitizer for dye‐sensitized PECs. In this work we report on the design, synthesis, and characterization of chiral supramolecular aggregates based on C₃‐symmetric triphenylamine‐based dyes that are able to both absorb visible light and control the spin state of the process. Variable temperature‐dependent spectroscopic measurements reveal the assembly process of the dyes and confirm the formation of chiral aggregates, both in solution as well as on solid supports. Photoelectrochemical measurements on TiO₂‐based anodes validate the advantage of using chiral supramolecular aggregates as photosensitizer displaying higher photocurrent compared to achiral analogues. Moreover, fluorimetric tests for the quantification of the hydrogen peroxide produced, confirm the possibility of controlling the spin of the reaction exerting spin‐selection with chiral supramolecular polymers. These results represent a further step towards the next‐generation of organic‐based water‐splitting solar cells.     

Minimization of Interferences in Flow Injection Amperometric Glucose Biosensor Based on Oxidation of Enzymatically‐produced H2O2

One of the major problems in amperometric biosensors based on detection of H₂O₂ produced by enzymatic reaction between oxidase enzymes and substrate is the interference of redox active compounds such as ascorbic acid (AA), dopamine (DA) and uric acid (UA). To minimize these interferences, sodium bismuthate was used for the first time as an insoluble pre‐oxidant in the flow injection (FI) amperometric glucose biosensor at a Glucose oxidase (GOx) immobilized Pt/Pd bimetallic modified pre‐anodized pencil graphite electrode (p.PGE). In this context, these interfering compounds were injected into a flow injection analysis (FIA) system using an injector which was filled with NaBiO₃. Thus, these interferents were converted into their redox inactive oxidized forms before reaching the electrode in the flow cell. While glucose was not influenced by the pre‐oxidant in the injector, the huge oxidation peak currents of the interferents decreased significantly in the biosensor. FI amperometric current time curves showed that the AA, DA and UA were minimized by 96 %, 86 %, and 98 % respectively, in the presence of an equivalent concentration of interferences in a 1.0 mM glucose solution. The proposed FI amperometric glucose biosensor exhibits a wide linear range (0.01–10 mM, R²=0.9994) with a detection limit of 2.4×10^?3 mM. Glucose levels in the artificial serum and two real samples were successfully determined using the fabricated FI amperometric biosensor.     

Double-exchange model for molecule-based magnets

We report a detailed study of a double-exchange model proposed for the molecule-based magnets. The model is applied to a two-dimensional periodic complex made of a transition metal and an organic molecule in which the electronic structure is described by effective d orbitals of the transition metal ion at infinite Hund's coupling limit and the lowest unoccupied molecular orbital of the organic molecule, π^∗. Depending on the average electron density of the organic molecules and various superexchange couplings between metal ions' core spins, magnetic states of the complex are investigated. Performing Monte Carlo calculations on a model Hamiltonian for various electron densities of the organic molecule, the average magnetization and critical magnetic ordering temperatures are determined.     

Enhanced Performance of Organic/Inorganic Hybrid Nanomaterials bearing Impregnated [PdL2] Complexes as Counter‐Electrode Catalyst for Dye‐Sensitized Solar Cells

N‐coordinate Pd²⁺ complexes [PdL₂] (L: N‐N‐quinoline‐8‐yl‐R‐benzenesulfonamides) ( 6–10 ) and [PdL₂] complexes assembled on multi‐wall carbon nanotubes (MWCNTs) hybrid nanomaterials were fabricated and characterized by various techniques. The [PdL₂] impregnated MWCNTs materials ( 11–15 ) were applied as a counter electrode (CE) catalyst for triiodide to iodide reduction reaction in the dye‐sensitized solar cells (DSSC) and investigated electro‐catalytic activities. The MWCNTs‐supported [PdL₂] CEs ( 11–15 ) are exhibits as Pt‐free CE with good power conversion efficiencies (PCEs), and compared to platinum and bare MWCNTs CEs and the PCE of bare MWCNTs was clearly improved by means of [PdL₂] complexes ( 6–10 ). The DSSCs based on the hybrid counter electrodes (CEs) ( 11–15 ) and bare MWCNTs are indicated a relative efficiency ( ? _rel ) of 64.27%, 54.07%, 53.75%, 51.52% 44.82% and 27.27% concerning a Pt CE control device set at 100%. The report emphasizes that [PdL₂] impregnated MWCNTs type counter electrodes (CEs) ( 11–15 ) are promising as effectively catalyst in working device design, particularly taking into account the eco‐friendly approach of the hybrids.     

Crystal Structure and Computational Study of 5-Ethyl-4-(4-Methoxyphenethyl)-4,5-Dihydro-3H-1,2,4-Triazol-3-One and 4-(4-Methoxyphenethyl)-5-Propyl-4,5-Dihydro-3H-1,2,4-Triazol-3-One

Crystallography Reports - Molecular structures of compounds 5-ethyl-4-(4-methoxyphenethyl)-4,5-dihydro-3H-1,2,4-triazol-3-one, (C13H17N3O2) (I) and...     

Thermo‐ and pH‐induced phase transitions and network parameters of poly(N‐isopropylacrylamide‐ co‐2‐acrylamido‐2‐methyl‐propanosulfonic acid) hydrogels

Dual temperature‐ and pH‐sensitive hydrogels composed of N‐isopropylacrylamide (NIPAM) and 2‐acrylamido‐2‐methyl‐propanosulfonic acid (AMPS) were prepared by free‐radical crosslinking copolymerization in aqueous solution at 22 °C. The mole percent of AMPS in the comonomer feed was varied between 0.0 and 7.5, while the crosslinker ratio was fixed at 5.0/100. The effect of AMPS content on thermo‐ and pH‐ induced phase transitions as well as equilibrium swelling/deswelling, interior morphology and network structure was investigated. The volume phase transition temperature (VPT‐T) was determined by both swelling/deswelling measurements and differential scanning calorimetry (DSC) technique. In addition, the volume phase transition pH (VPT‐pH) was detected from the derivative of the curves of the swelling ratio (dQ_v/dpH) versus pH. The polymer‐solvent interaction parameter (χ) and the average molecular mass between crosslinks ( ) of hydrogels were calculated from swelling ratios in buffer solutions at various pHs. The enthalpy (ΔH) and entropy (ΔS) changes appearing in the χ parameter of hydrogels were also determined by using the modified Flory–Rehner equation. The negative values for ΔH and ΔS indicated that the hydrogels had a negative temperature‐sensitive property in water, that is, swelling at a lower temperature and shrinking at a higher temperature. It was observed that the experimental swelling data of hydrogels at different temperature agreed with the modified Flory‐Rehner approach based on the affine network model. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1713–1724, 2008