Stereoselective synthesis of β-hydroxy-α-methylketones via z- and e-vinyloxyboranes generated directly from cyclohexyl ethyl ketone

$\text{E}$- and $\text{Z}$-dialkylvinyloxyboranes, prepared directly from cyclohexyl ethyl ketone, undergo stereo-selective aldol condensations to provide $\text{threo}$- $\text{erythro}$-β-hydroxy-α-methylketones, respectively.     

Preparation and characterization of polypropylene/mesoporous silica nanocomposites with confined polypropylene

Polypropylene (PP)/Ti-MCM-41 nanocomposites were prepared by isospecific propylene polymerization with Ti-MCM-41/Al(i-C₄H₉)₃ catalyst. The cross polarization/magic angle spinning (CP/MAS) ¹³C NMR spectrum of the composite was similar to that of the conventional isotactic PP, and the decrease in the pore volume of Ti-MCM-41 in the nanocomposites, as measured by N₂ adsorption, was consistent with the value calculated from the weight loss in the thermogravimetric analysis (TGA) curve; both these facts attest to propylene polymerization within the mesopores of Ti-MCM-41. Alkali treatment followed by extraction with o-dichlorobenzene allows us to extract the confined PP out of the Ti-MCM-41 mesopores. Although the PP/Ti-MCM-41 nanocomposites do not exhibit a crystalline melting point, the same PP when extracted from the mesopores showed a clear melting point at 154.7 °C; this indicates that the crystallization of PP confined in mesopores is strongly hindered. For the PP polymerized within the confinement, the molecular weight (M_w) and molecular weight distribution (M_w/M_n) were 84,000 and 4.3, respectively; these values were considerably smaller than those of the PP polymerized concurrently outside the Ti-MCM-41 mesopores (M_w = 200,000–450,000, M_w/M_n = 40–75). Therefore, the confinement also has a marked effect on the molecular weight of the PP. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3324–3332, 2003     

Regioselective Borylation of Porphyrins by C?H Bond Activation under Iridium Catalysis to Afford Useful Building Blocks for Porphyrin Assemblies

Highly regioselective and efficient borylation of a variety of porphyrins has been achieved by reaction with bis(pinacolato)diboron through C? H bond activation under iridium catalysis on the basis of the synthetic protocol developed by Miyaura, Hartwig, and Smith. A boryl group can be selectively introduced at sterically uncongested positions in the peripheral aryl groups of porphyrin substrates whose peripheral β‐positions are sterically hindered. Curiously, β substituents adjacent to the aryl group to be borylated have unexpectedly large effects on the regioselectivity, because the iridium catalyst can discriminate between subtle steric differences. Chemoselective borylation was also achieved for several functionalized porphyrins. This borylation protocol can be applied to various monomeric and oligomeric functional porphyrins, hence offering an efficient route to elaborate multiporphyrin‐based molecular constructs.     

Analysis of a meshless solver for high Reynolds number flow

In this paper, the extension of an upwind least‐square based meshless solver to high Reynolds number flow is explored, and the properties of the meshless solver are analyzed both theoretically and numerically. Existing works have verified the meshless solver mostly with inviscid flows and low Reynolds number flows, and in this work, we are interested in the behavior of the meshless solver for high Reynolds number flow, especially in the near‐wall region. With both theoretical and numerical analysis, the effects of two parameters on the meshless solver are identified. The first one is the misalignment effect caused by the significantly skewed supporting points, and it is found that the meshless solver still yields accurate prediction. It is a very interesting property and is opposite to the median‐dual control volume based vertex‐centered finite volume method, which is known to give degraded result with stretched triangular/tetrahedral cells in the near‐wall region. The second parameter is the curvature, and according to theoretical analysis, it is found in the region with both large aspect ratio and curvature, and the streamwise residual is less affected; however, the wall‐normal counterpart suffers from accuracy degradation. In this paper, an improved method that uses a meshless solver for the streamwise residual and finite difference for wall‐normal residual is developed. This method is proved to be less sensitive to the curvature and provides improved accuracy. This work presents an understanding of the meshless solver for high Reynolds number flow computation, and the analysis in this paper is verified with a series of numerical experiments. Copyright © 2012 John Wiley & Sons, Ltd.     

Abnormal Li diffusion in β-LiGa by the formation of defect complex

The diffusion coefficients of Li in the NaTl-type Li intermetallic compound of β-LiGa have been measured by using a short-lived radioactive diffusion tracer. As the tracer, the α-emitting radioisotope of ⁸Li delivered as the energetic and pulsed beam from Tokai Radioactive Ion Accelerator Complex (TRIAC) was implanted into the β-LiGa compounds with the composition in the range of about 43 to 54 at.% Li. By analyzing the time-dependent yields of the α-particles measured according to the repetition cycle of the beam, the tracer diffusion coefficients were extracted over the wide range of Li composition. Abnormal composition-dependence of Li diffusion coefficients in β-LiGa was observed; the stoichiometric β-LiGa showed the highest diffusivity of Li. By referring to the composition-dependent diffusivity of Li in the iso-structural β-LiAl and β-LiIn, we could identify the abnormal diffusion of Li in very Li-poor composition of β-LiGa. The anomaly has been discussed qualitatively in terms of the formation of defect complex and the interaction between the constitutional defects.     

Quinone-recognition by Four-point Hydrogen Bonding in Porphyrin System Having Urea Moiety

5,15- cis -bis(Ureidophenyl)porphyrins have significant recognizing ability for p -benzoquinones through four-point hydrogen bonding. Although an unusual temperature-dependence of the complexation is observed with bis( N '-phenylureidophenyl) porphyrin, bis( N '-ethylureidophenyl)porphyrin shows a satisfactorily linear van't Hoff plot and recognizes an electron-rich p -benzoquinone such as tetramethyl- p -benzoquinone more effectively, which is ascribed to the large enthalpy change in the complex.     

Polymer-Supported Bases. 10. Synthesis of Phosphatidylcholines Using Polymer-Supported or Free Acylimidazoles

Dipalmitoylphosphatidylcholine was synthesized in a good yield by the reaction of L-α-glycerophosphorylcholine with 1-palmitoylimidazole in the presence of DBU. Polymer-supported 1-palmitoylimidazole moiety also could be used as the acylating reagent, though the yield of the choline was moderate.     

Unusual annulation reaction of electron-deficient alkenes with enamines: an easy access to stereocontrolled 4-fluoroalkylated 3,4-dihydro-2H-pyrans

The reaction of β-fluoroalkylated α,β-unsaturated ketones with various enamines gave 4-fluoroalkylated 3,4-dihydro-2H-pyrans as a major product in good yields by a one-pot operation, and these products display the high diastereoselection just after single recrystallization. This unexpected result is rationalized by the unique reactivity of β-fluoroalkylated α,β-unsaturated ketones. As the synthetic application, 4-trifluoromethyl tetrahydropyran was synthesized in moderate isolated yield with high diastereoselectivity.     

Synthesis and lyotropic liquid crystal properties of chiral helical polycarbodiimides

Chiral helical polymers have been expected to exhibit optical activity with a significantly large optical rotation power. In this paper polymethylphenylethylcarbodiimides (Poly-PhEMCDI) with helical structure were synthesized by the insertion polymerization of a corresponding chiral monomeric carbodiimide initiated by a copper complex. The circular dichroism spectra and optical rotation power induced by the ordered rigid main chain helical structure of polycarbodiimides, in solution and as cast films, were studied. Polycarbodiimides have a rigid rod helical structure and form lyotropic liquid crystal (LLC) in organic solvents such as dichloromethane (DCM), chloroform and THF. The LLC phase was studied using polarizing optical microscopy and X-ray diffraction. A chiral nematic phase was formed in DCM and chloroform in the concentration range 20–36%. Spherulites were formed in more concentrated solution. The formation of a LLC phase in polycarbodiimides organic solutions makes it possible to align the polymer helical chain to form an ordered film for electro-optical applications.     

A Base‐Free Neutral Phase‐Transfer Reaction System

Although phase‐transfer reactions catalyzed by using quaternary ammonium salts are generally believed to require base additives, we discovered that, even without any base additives, conjugate additions of 3‐substituted oxindoles to nitroolefins proceeded smoothly in the presence of lipophilic quaternary ammonium bromide under water–organic biphasic conditions. The mechanism of this novel base‐free neutral phase‐transfer reaction system is investigated and the assumed catalytic cycle is presented together with interesting effects of water and lipophilicity of the phase‐transfer catalyst. The base‐free neutral phase‐transfer reaction system can be applied to highly enantioselective conjugate addition and aldol reactions under the influence of chiral bifunctional ammonium bromides as key catalysts. The structure of the chiral ammonium enolate intermediate is discussed based on the single‐crystal X‐ray structures of relevant ammonium salts and the importance of bifunctional design of catalyst is clearly explained in the model of intermediate.