水声通信中基于信道辨识的盲turbo均衡方法

水声信道多途效应明显,造成接收信号存在严重的码间干扰(ISI,Intersymbol interference)。基于最小均方误差(MMSE,Minimum mean square error)准则的turbo均衡器级联了均衡和信道译码,能够有效去除ISI,并获得优良的性能。由于水声信道的时变性,传统MMSE-turbo均衡需要周期性的训练序列,以实现连续可靠的通信。训练序列虽然提高了通信的可靠性,但降低了信息的有效传输速率。因此,为提高通信效率,本文提出了一种盲turbo均衡方法,该方法通过引入新的盲信道辨识器来同时获得信道估计响应和已去除部分ISI的初步均衡输出信号,并为turbo均衡提供初始的响应参数和比特软信息。与水声通信中应用较多的盲判决反馈均衡器(DFE,Decision feedback equalizer)相比,海上实验结果证明本文提出的盲turbo均衡方法抗信道多途衰落的能力较强,并且与传统MMSE-turbo均衡相比无需训练序列,因此提高了信息的有效传输速率。     

固相萃取/液相色谱-串联质谱法测定水果蔬菜中双胍辛胺的残留量

糖尿病是继肿瘤和心脑血管疾病之后世界第3大威胁人类健康的重大非传染性疾病。血糖检测是医生诊断糖尿病、制定和调整治疗方案的科学依据。无创血糖检测技术取代传统的有创、微创血糖检测技术是未来发展的必然趋势,具有重要的应用价值和广阔的市场前景。近二十年来,研究人员依据不同的物理原理提出了多种无创血糖检测方法,该文按光学类和非光学类两大类别分别阐述各种无创血糖检测方法的基本原理及其优缺点,并探讨了无创血糖检测技术未来的发展趋势。     

微乳液法制备介孔碳材料

介孔碳材料因具有高比表面积,规则的孔隙结构,低密度,良好的生物相容性及导电性,被广泛应用于催化、能量储存及转化、吸附分离和药物递送等领域。微乳液法具有制备工艺简便、环境友好、可大规模生产及产物结构可控性强等突出优势,在制备孔隙结构可控和特殊形态介孔碳方面取得突破性的进展。本文首先着重分析了微乳液法制备介孔碳的反应机理,包括微乳液诱导协同组装机制、乳液溶胀效应和微流控液滴技术。其次,进一步探讨了控制介孔碳材料孔隙形态、外部形貌及内部结构的影响因素。最后,对新型介孔碳材料在能源储存与转化、催化、吸附以及药物递送领域的应用进行了归纳,并对未来的发展提出了展望。     

最大泡压法测表面张力等温线的数据处理方法比较*

对乙酸、丙酸、正丁酸、2-甲基丁酸、3-甲基丁酸、正戊酸、正己酸、乙醇、丙醇、异丙醇、正丁醇、异丁醇、1,2-丙二醇等13种常用试剂在25 ℃下的表面张力数据拟合方法进行了比较,分析了图解法处理数据及多项式、一阶指数函数、幂函数、Shishkovsky经验公式拟合数据的优缺点。指出Shishkovsky经验公式拟合结果准确,受数据样本量影响小,是理想的表面张力数据拟合方法。     

Cobalt‐Embedded Nitrogen‐Rich Carbon Nanotubes Efficiently Catalyze Hydrogen Evolution Reaction at All pH Values

Despite being technically possible, splitting water to generate hydrogen is still practically unfeasible due mainly to the lack of sustainable and efficient catalysts for the half reactions involved. Herein we report the synthesis of cobalt‐embedded nitrogen‐rich carbon nanotubes (NRCNTs) that 1) can efficiently electrocatalyze the hydrogen evolution reaction (HER) with activities close to that of Pt and 2) function well under acidic, neutral or basic media alike, allowing them to be coupled with the best available oxygen‐evolving catalysts—which also play crucial roles in the overall water‐splitting reaction. The materials are synthesized by a simple, easily scalable synthetic route involving thermal treatment of Co²⁺‐embedded graphitic carbon nitride derived from inexpensive starting materials (dicyandiamide and CoCl₂). The materials’ efficient catalytic activity is mainly attributed to their nitrogen dopants and concomitant structural defects.     

β-CD辅助的9-(2,3-环氧丙基)嘌呤核苷的水相合成

室温条件利用β-环糊精作为助剂,通过亲核取代反应在水相中合成了一系列9-(2,3-环氧丙基)嘌呤核苷。本方法操作简单,反应条件温和,收率较高。β-CD的作用在于通过与底物包结增加它们在水中的溶解度,减少副反应发生,促进反应进行。     

聚对氨基苯磺酸/石墨烯电化学修饰电极检测药物中氧氟沙星

基于石墨烯纳米材料和循环伏安法技术制备了聚对氨基苯磺酸/石墨烯修饰电极并研究了氧氟沙星(OFL)在该修饰电极上的电化学行为,建立了一种简单快速灵敏测定氧氟沙星的电化学分析方法。 结果表明,与玻碳电极相比,对氨基苯磺酸/石墨烯电化学修饰电极能显著提高氧氟沙星的峰电流。 在优化条件下,其检测线性范围为1~600 μmol/L,最低检测限为(S/N=3)0.33μmol/L。 该修饰电极具有较好的重现性和稳定性,用于实际样品氧氟沙星滴眼液的测定,效果良好。     

g-C3N4/Ag/TiO2复合材料的构筑及其光催化性能（英文）

以合成的g-C3N4纳米片和Ag/TiO2空心微球为原料,采用机械搅拌的方法构筑了g-C3N4/Ag/TiO2三元复合光催化剂。采用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、扫描电镜(SEM)、X射线光电子能谱(XPS)、紫外-可见光漫反射(UV-Vis DRS)和光致发光光谱(PL)对g-C3N4/Ag/TiO2进行了表征。研究表明,g-C3N4/Ag/TiO2是由Ag/TiO2微球和g-C3N4纳米片复合而成的。与TiO2相比,其可见光响应范围延长,光生载流子的分离速率加快。在室温下,用降解罗丹明B的反应考察了g-C3N4/Ag/TiO2的可见光催化活性。研究表明,光照180 min时,g-C3N4(0.5%)/Ag/TiO2显示了最高的光催化活性(91.9%),分别是TiO2和Ag/TiO2的7.5和1.8倍。光催化活性的提高与合理的异质结构建和Ag的导电性能有关。     

Sustainable preparation of gold nanoparticles via green chemistry approach for biogenic applications

Novel premises of ‘Green Nanotechnology’ have tremendous impacts towards industrial scale revolution. The furtive extracted from natural precursors have driven to the generation of biogenic resources for the fabrication of cutting-edge nanomaterials in simple and cost-effective process. This inspection is an intension of the coupling hypothesis of Nanotechnology via ‘Green-Chemistry’ avenue. So, as to diminish the negative effects of technological applications in the health of human beings and the environment, society is focused towards a greener future. Nanoscience assures a promising future by its improvement in green chemistry to develop the 'Greenary Nanoscience and Nanotechnology'. The improvement and execution of chemical assisted processes in order to reduce the usage of harmful substances, the ‘Green Chemistry’ approach is one and only remarkable authentication, which attributed to long range surface area and higher pore volume of gold-nanoparticles. As of now, the efficient biogenic mechanism dramatically reduces the utilization and hazardous reagents have been employed to low-price natural and waste products to yield value-added nanomaterials with extensive relevance, suggesting an economical and green solution to environmental issues. In depth investigation of this critical review illustrates, novel biogenic screening platform was also conducted against antimicrobial strains and degradation of gold-nanoparticles products well explored-from selection precursors evolved from natural extracts, as well as eventually disintegration into bio-degradable yet potentially recyclable byproducts.     

Precisely Tuning Photothermal and Photodynamic Effects of Polymeric Nanoparticles by Controlled Copolymerization

Cancer possesses normoxic and hypoxia microenvironments with different levels of oxygen, needing different efficacies of photothermal and photodynamic therapies. It is important to precisely tune the photothermal and photodynamic effects of phototherapy nano‐agents for efficient cancer treatment. Now, a series of copolymeric nanoparticles (PPy‐Te NPs) were synthesized in situ by controlled oxidative copolymerization with different ratios of pyrrole to tellurophene by FeCl₃. The photothermal and photodynamic effects of semiconducting nano‐agents under the first near‐infrared (NIR) irradiation were precisely and systematically tuned upon simply varying the molar ratio of the pyrrole to tellurophene. The PPy‐Te NPs were used for cancer treatment in mice, exhibiting excellent biocompatibility and therapeutic effect. This work presents a simple method to tune photothermal and photodynamic therapies effect in semiconducting nano‐agents for cancer treatment.