Can a meso-type dinuclear complex be chiral?: dinuclear β-diketonato Ru(III) complexes

Dinuclear Ru(III) complexes, [Ru(III)(acac)(2)(dabe)Ru(III)(acac)(2)] (acacH = acetylacetone; dabeH(2) = 1, 2-diacetyl-1,2-dibenzoylethane) and [Ru(III)(acac)(2)(tbet)Ru(III)(acac)(2)] (tbetH(2) = 1,1,2,2-tetrabenzoylethane) were synthesized by reacting [Ru(acac)(2)(CH(3)CN)(2)]PF(6) with dabeH(2) and tbetH(2) respectively, in toluene. The X-ray structural analysis of a meso-type dinuclear Ru(III) complex, ΔΛ-[Ru(III)(acac)(2)(dabe)Ru(III)(acac)(2)], showed that the bridging part became chiral due to the orthogonal twisting of two non-symmetrical β-diketonato moieties. To confirm this conclusion, the complex was resolved chromatographically to provide a pair of optical antipodes. Such chirality in the bridging part was not generated for [Ru(III)(acac)(2)(tbet)Ru(III)(acac)(2)], because the β-diketonato moieties in tbet(2-) are symmetrical.     

Quantitative imaging of ion transport through single nanopores by high-resolution scanning electrochemical microscopy

Here we report on the unprecedentedly high resolution imaging of ion transport through single nanopores by scanning electrochemical microscopy (SECM). The quantitative SECM image of single nanopores allows for the determination of their structural properties, including their density, shape, and size, which are essential for understanding the permeability of the entire nanoporous membrane. Nanoscale spatial resolution was achieved by scanning a 17 nm radius pipet tip at a distance as low as 1.3 nm from a highly porous nanocrystalline silicon membrane in order to obtain the peak current response controlled by the nanopore-mediated diffusional transport of tetrabutylammonium ions to the nanopipet-supported liquid-liquid interface. A 280 nm × 500 nm image resolved 13 nanopores, which corresponds to a high density of 93 nanopores/μm(2). A finite element simulation of the SECM image was performed to assess quantitatively the spatial resolution limited by the tip diameter in resolving two adjacent pores and to determine the actual size of a nanopore, which was approximated as an elliptical cylinder with a depth of 30 nm and major and minor axes of 53 and 41 nm, respectively. These structural parameters were consistent with those determined by transmission electron microscopy, thereby confirming the reliability of quantitative SECM imaging at the nanoscale level.     

On Ni catalysts for catalytic, asymmetric Ni/Cr-mediated coupling reactions

The importance of the Ni catalyst in achieving catalytic asymmetric Ni/Cr-mediated coupling reactions effectively is demonstrated. Six phenanthroline-NiCl(2) complexes 1a-c and 2a-c and five types of alkenyl iodides A-E were chosen for the study, thereby demonstrating that these Ni catalysts display a wide range of overall reactivity profiles in terms of the degree of asymmetric induction, geometrical isomerization, and coupling rate. For three types of alkenyl iodides A-C, a satisfactory Ni catalyst(s) was found within 1a-c and 2a-c. For disubstituted (Z)-alkenyl iodide D, 2c was identified as an acceptable Ni catalyst in terms of the absence of Z → E isomerization and the degree of asymmetric induction but not in terms of the coupling rate. Two phosphine-based Ni catalysts, [(Me)(3)P](2)·NiCl(2) and [(cy)(3)P](2)·NiCl(2), were found to meet all three criteria for D. The bond-forming reaction at the C16-C17 position of palytoxin was used to demonstrate the usefulness of the Ni catalysts thus identified.     

Relevance of continuously self-imaging gratings for noise robust imagery

We have designed miniaturized, simple, and robust cameras composed of a single diffractive optical element (DOE) that generates a continuously self-imaging (CSI) beam. Two different DOEs are explored: the J₀ Bessel transmittance, characterized by a continuous optical transfer function (OTF) and the CSI grating (CSIG), characterized by a sparse OTF. In this Letter, we will analyze the properties of both DOEs in terms of radiometric performances. We will demonstrate that the noise robustness is enhanced for a CSIG, thanks to the sparsity of its OTF. A camera using this DOE has been made and experimental images are presented to illustrate the noise robustness.     

Excited states and electronic spectra of annulated dinuclear free-base phthalocyanines: a theoretical study on near-infrared-absorbing dyes

The electronic excited states and electronic absorption spectra of annulated dinuclear free-base phthalocyanine (C(58)H(30)N(16)) are studied through quantum chemical calculations using the symmetry-adapted cluster-configuration interaction (SAC-CI) method. Three tautomers are possible with respect to the position of the pyrrole protons; therefore, the SAC-CI calculations for these tautomers were performed. The structures of the Q-band states are discussed based on the character of their molecular orbitals. The lower energy shift of the Q-bands because of dimerization is explained by the decrease in the HOMO-LUMO gaps resulting from the bonding and antibonding interactions between the monomer units. The electronic dipole moments of the nonsymmetric tautomer were calculated, and the possibility of charge-separated excited states is discussed. The relative energies of these tautomers are examined using density functional theory (DFT) calculations for several peripheral substituents. The relative energies of these tautomers significantly depend on the substituents, and therefore, the abundance ratios of the three tautomers were affected by the substituents. The absorption spectra were simulated from the SAC-CI results weighted by the Boltzmann factors obtained from the DFT calculations. The SAC-CI spectra reproduce the experimental findings well. The thermal-averaged SAC-CI spectra could explain the observed substituent effect on the structure of the Q-bands in terms of the relative stabilities and the abundance ratios of the tautomers. The SAC-CI and time-dependent density functional theory calculations are also compared. The CAM-B3LYP results agreed with the trends of the SAC-CI results; however, the CAM-B3LYP calculation overestimated the excitation energies in comparison with the SAC-CI and experimental results.     

An analytical solution to non-axisymmetric heat transfer with viscous dissipation for non-Newtonian fluids in laminar forced flow

Forced convection heat transfer in a non-Newtonian fluid flow inside a pipe whose external surface is subjected to non-axisymmetric heat loads is investigated analytically. Fully developed laminar velocity distributions obtained by a power-law fluid rheology model are used, and viscous dissipation is taken into account. The effect of axial heat conduction is considered negligible. The physical properties are assumed to be constant. We consider that the smooth change in the velocity distribution inside the pipe is piecewise constant. The theoretical analysis of the heat transfer is performed by using an integral transform technique – Vodicka’s method. An important feature of this approach is that it permits an arbitrary distribution of the surrounding medium temperature and an arbitrary velocity distribution of the fluid. This technique is verified by a comparison with the existing results. The effects of the Brinkman number and rheological properties on the distribution of the local Nusselt number are shown.     

Experimental study on effect of relative humidity on heat transfer of an evaporating water droplet in air flow

Dispersed water droplets are often seen in environmental air flows in rain, cloud, mist, sea spray and so on. It is therefore of great importance to precisely estimate heat transfer between water droplets and atmospheric air in developing a reliable climate model. The purpose of this study is to fabricate the measurement system for the temperature of a small water droplet in air flow under the controlled relative humidity condition and to investigate the effect of relative humidity on heat transfer across the surface of an evaporating water droplet in air flow. The results show that the droplet temperature decreases in the low-relative-humidity condition, whereas it increases in the high-relative-humidity condition. Nusselt number on the droplet surface is not affected by the relative humidity.     

Formation of 1,2,4-trioxolanes via 9,10-dicyanoanthracene(DCA)-sensitized photo-oxygenation of 2,2-diaryl-3-(2,2-diarylvinyl)oxiranes

9,10-Dicyanoanthracene-sensitized photo-oxygenation of 2,2-diaryl-3-(2,2-diarylvinyl)oxiranes 3 in acetonitrile did not afford the corresponding 1,2,4-trioxepines 4, but 1,2,4-trioxolanes 7. The structural assignment of 7 was reported, and the mechanism of the formation of 7 was proposed.     

Efficient Simulations of Charged Colloidal Dispersions: A Density Functional Approach

Summary: A numerical method is presented for simulating charged colloidal dispersions in electrolyte solutions. Utilizing a smoothed profile for colloid‐solvent boundaries, efficient mesoscopic simulations are enabled for modeling dispersions of many colloidal particles exhibiting many‐body electrostatic interactions. The validity of the method was examined for simple colloid geometries, and the efficiency was demonstrated by calculating stable structures of two‐dimensional dispersions, which resulted in the formation of colloidal crystals.

Formation of a charged colloidal crystal.     

VLS Growth of ITO Whiskers Prepared by the Electron Shower Method

Indium tin oxide (ITO) whiskers were grown by VLS (vapour-liquid-solid) mechanism, using the electron shower method. The whiskers were grown above 200 °C, and the deposition rate was above 0.6 nm/s. The electron shower controlled the size of the whiskers, and the size was 30 nm in diameter and 600 nm in length. The whiskers grew along the substrate at t < 300 s, but grew in a direction perpendicular to the substrate at t > 300 s. When the ITO whiskers grown along the substrate were used as NO₂ gas sensor, the sensitivity was 340, and about 300 times higher than those of the whiskers grown in a direction perpendicular to the substrate and plate-like ITO crystallites.