The Interaction Between N–Isopropylacrylamide-Acrylic Acid-Ethyl Methacrylate Thermosensitive Polymers and Cationic Surfactants

The interaction between cationic surfactants and isopropylacrylamide-acrylic acid-ethyl methacrylate (IPA:AA:EMA) terpolymers has been investigated using steady-state fluorescence and spectrophotometric measurements to assess the effect of the polymer composition on the aggregation process and terpolymers’ thermosensitivities. Micropolarity studies using pyrene show that the interaction of cationic surfactants with IPA:AA:EMA terpolymers occurs at surfactant concentrations much smaller than that observed for the pure surfactant in aqueous solution. The critical aggregation concentration (CAC) values decrease with both the hydrocarbon length of the surfactant and the content of ethyl methacrylate. These results were interpreted as a manifestation of the increasing contribution of attractive hydrophobic and electrostatic forces between negatively charged polymer chains and positively charged surfactant molecules. The increase of ethyl methacrylate in the copolymers lowers the CAC due to the larger hydrophobic character of the polymer backbone. The cloud point determination reveals that the lower critical solution temperatures (LCST) depend strongly on the copolymer composition and surfactant nature. The binding of surfactants molecules to the polymer chain screens the electrostatic repulsion between the carboxylic groups inducing a conformational transition and the dehydration of the polymer chain.     

Determination of 3‐α‐hydroxytibolone in human plasma by LC‐MS/MS: application for a pharmacokinetic study after administration of a tibolone formulation

A new method was developed for the quantitation of 3‐α‐hydroxy tibolone, in human plasma, after oral administration of a tablet formulation containing tibolone (2.5 mg). 3‐α‐Hydroxy tibolone was extracted by a liquid–liquid procedure, using cyproterone acetate as internal standard and chlorobutane as extraction solvent. After extraction, samples were submitted to a derivatization step with p‐toluenesulfonyl isocyanate. A mobile phase consisting of acetonitrile and water (72:28 v/v) was used and chromatographic separation was achieved using Agilent XDB C₁₈ column (100 × 4.6 mm i.d.; 5 µm particle size), at 40°C. Mass spectrometric detection was performed using atmospheric pressure chemical ionization in negative mode for 3‐α‐hydroxy tibolone and in positive mode for cyproterone acetate. The fragmentation transitions were m/z 510.2 → m/z 170.1 and m/z 417.0 → m/z 357.1 for 3‐α‐hydroxy tibolone and cyproterone acetate, respectively. Calibration curves were constructed over the range 100–30,000 pg/mL and the method was shown to be specific, precise and accurate, with a mean recovery rate of 94.2% for 3‐α‐hydroxy tibolone. No matrix effect or carry‐over was detected in the samples. The validated method was applied in a pharmacokinetic study with a tibolone formulation in healthy female volunteers. Copyright © 2013 John Wiley & Sons, Ltd.     

Speciation analysis of Sn(II) and Sn(IV) using baker’s yeast and inductively coupled plasma optical emission spectrometry

The use of Saccharomyces cerevisiae as a substrate to selectively retain Sn(II) and Sn(IV) has been investigated. Several factors affecting the retention of the analytes by yeast, such as pH, amount of biomass, temperature and time of contact were evaluated. Based on this study, a method for determination of Sn(II) and Sn(IV) combining inductively coupled plasma optical emission spectrometry (ICP OES) and solid phase extraction using Saccharomyces cerevisiae is proposed. The procedure consists of the selective retention of Sn(IV) by yeast at pH = 2.0 while Sn(II) remains in solution. Determination of tin in the solid phase was easily carried out by submitting a slurry of the yeast (0.5 g/40 mL) directly to ICP OES. The precision of the extraction procedure was characterized by an RSD lower than 4%. The detection limits of tin (3σ) in the solid phase and the liquid phase were 1.1 and 0.7 μg L⁻¹, respectively. The proposed approach was evaluated for determination of Sn(II) and Sn(IV) in spiked river water and real samples of industrial waste water (untreated and treated). For all samples, recoveries of spiked Sn(II) and Sn(IV) were between 85 and 112%.     

Waveguides and gratings fabrication in zirconium-based organic/inorganic hybrids

Sol–gel derived poly(oxyethylene)/siloxane organic/inorganic di-ureasil hybrids containing different amounts of methacrylic acid (McOH, CH₂=C(CH₃)COOH)) modified zirconium oxo-clusters (Zr-OMc) were processed as thin films deposited in glassy substrates via spin coating and as transparent and shape controlled monoliths. Channel monomode waveguides and diffraction gratings were UV patterned using the Talbot interferometer and the Lloyd mirror interferometer experimental setups. The time dependence of the diffraction gratings efficiency was studied for hybrids containing different amounts of Zr-OMc. Finally, the number of propagating modes and the refractive index gradient within the waveguide region, determined as a Gaussian section located below the patterned channel, was evaluated and modeled, a maximum index contrast of 2.43 × 10^?5 being estimated.     

Effects of organic and inorganic additives on flotation recovery of washed cells of Saccharomyces cerevisiae resuspended in water

Separation of microbial cells by flotation recovery is usually carried out in industrial reactors or wastewater treatment systems, which contain a complex mixture of microbial nutrients and excretion products. In the present study, the separation of yeast cells by flotation recovery was carried out using a simple flotation recovery systems containing washed yeast cells resuspended in water in order to elucidate the effects of additives (defined amounts of organic and inorganic acids, ethanol, surfactants and sodium chloride) on the cellular interactions at interfaces (cell/aqueous phase and cell/air bubble). When sodium chloride, organic acids (notably propionic, succinic and acetic acids) and organic surfactants (sodium dodecyl sulphate (SDS), cetyltrimethylammonium bromide (CTAB) and Nonidet P40) were added to the flotation recovery system, significant increases in the cell recovery of yeast hydrophobic cells (Saccharomyces cerevisiae, strain FLT-01) were observed. The association of ethanol to acetic acid solution (a minor by-product of alcoholic fermentation) in the flotation recovery system, containing washed cells of strain FLT-01 resuspended in water, leading to an increased flotation recovery at pH 5.5. Thus, the association among products of the cellular metabolism (e.g., ethanol and acetic acid) can improve yeast cell recovery by flotation recovery.     

Assessment of a composite method based on selected density functional theory methods and complete basis set extrapolation formulas

Extrapolation formulas based on power and exponential formulas, as well as alternatives from a Taylor series, were tested and used with density functional theory (DFT) for the calculation of enthalpies of formation. The following four functionals were analyzed: B3LYP, BMK, M06-2X, and B2PLYP. Preliminary tests pointed to B2PLYP and B3LYP as the best and worst functionals, respectively. Taylor series expressions were as accurate as the power formulas and presented better performance than the exponential equation. The power formula (Equation (2)) and one of the simplest Taylor expressions (Equation (13)) were selected for the calculations with B3LYP and B2PLYP, with further empirical adjustments based on the higher level correction (HLC) and scaling of the experimental atomization energies used to calculate enthalpies of formation. HLC improved the B3LYP mean absolute error (MAE) from approximately 4.3 to 3.5 kcal mol⁻¹ using both extrapolation alternatives. For B2PLY, the MAEs were improved from 2.7 to 2.6 kcal mol⁻¹. Regarding the G3/05 test set, a significant improvement in the MAEs around 2.5 and 1.5 kcal mol⁻¹ were achieved using B3LYP and B2PLYP, respectively. The accuracy obtained from these empirical corrections was equivalent to other composite methods. The MAEs from B3LYP and B2PLYP may be suggested as ranges for the possible accuracy to be achieved by some DFT methods. The empirical corrections suggested in this work are improvements that may be considered to provide acceptable accuracy for enthalpies of formation and possibly other properties.     

Immobilization of Cyclodextringlycosyltransferase (CGTase) from Bacillus firmus in Commercial Chitosan

The enzyme cyclodextringlycosyltransferase (CGTase) was immobilized in commercial chitosan with different methods of immobilization at different temperatures, with the aim of obtaining a product with improved activity and higher recovery of the free enzyme activity. Three immobilization methods were tested: adsorption, covalent bonding with -aminopropyltriethoxysilane (CB-APTS), and covalent bonding with hexamethylenediamine (BC-HEMDA). Two test conditions were used, 7 °C without agitation and 26 °C with stirring. The best results were obtained with the method that uses HEMDA as the bifunctional covalent binding agent, giving the highest immobilized enzyme specific activity, 0.263 mol -CD/min mg of protein, and highest enzyme activity recovery, 5.2%, when immobilization was carried out at 7 °C.     

Systematic Sequences of Geometric Relativistic Basis Sets. I:s- and p-Block Elements up to Xe

In this work a scheme for constructing systematic sequences of relativistic SCF basis sets at a reasonable computational cost is presented and applied to atoms of the s- and p-block up to Xe. This scheme, which couples simplex optimization and the use of geometric series given by four-term polynomial expressions for the logarithm of the exponents, allows for the construction of basis sets that exhibit very regular patterns of convergence to the numerical reference values of atomic total energies, spinor energies and radial expectation values. This regularity, together with the broad range of basis set sizes presented, enables these sets to be used as building blocks for basis sets applicable in both routine and benchmark relativistic calculations on atomic and molecular systems.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

Sulfide and sulfoxide oxidations by mono- and diperoxo complexes of molybdenum. A density functional study

The molecular mechanism for the oxidation of sulfides to sulfoxides and subsequent oxidation to sulfones by diperoxo, MoO(O(2))(2)(OPH(3)) (I), and monoperoxo, MoO(2)(O(2))(OPH(3)) (II), complexes of molybdenum was studied using density functional calculations at the b3lyp level and the transition state theory. Complexes I and II were both found to be active species. Sulfide oxidation by I or II shows similar activation free energy values of 18.5 and 20.9 kcal/mol, respectively, whereas sulfoxides are oxidized by I (deltaG = 20.6 kcal/mol) rather than by II (deltaG = 30.3 kcal/mol). Calculated kinetic and thermodynamic parameters account for the spontaneous overoxidation of sulfides to sulfones as has been experimentally observed. The charge decomposition analysis (CDA) of the calculated transition structures of sulfide and sulfoxide oxidations revealed that I and II are stronger electrophilic oxidants toward sulfides than they are toward sulfoxides.