Measurement of dynamical forces between deformable drops using the atomic force microscope. I. Theory

Recent experimental developments have enabled the measurement of dynamical forces between two moving liquid drops in solution using an atomic force microscope (AFM). The drop sizes, interfacial tension, and approach velocities used in the experiments are in a regime where surface forces, hydrodynamics, and drop deformation are all significant. A detailed theoretical model of the experimental setup which accounts for surface forces, hydrodynamic interactions, droplet deformation, and AFM cantilever deflection has been developed. In agreement with experimental observations, the calculated force curves show pseudo-constant compliance regions due to drop flattening, as well as attractive pull-off forces due mainly to hydrodynamic lubrication forces.     

Determination of phthalates in water using fiber introduction mass spectrometry

Fiber introduction mass spectrometry (FIMS)-a direct coupling of SPME and MS-using selective ion monitoring (SIM) was used to detect and quantify dimethylphthalate (DMP), diethylphthalate (DEP) and dipropylphthalate (DPP) in mineral water. In FIMS, a chromatographic silicone septum is the only barrier between ambient and the high-vacuum mass spectrometer, permitting direct introduction of the SPME fiber into the ionization region of the equipment. After their thermal desorption and ionization and dissociation, the extracted phthalates are detected and quantitated by MS. Three types of SPME fibers were screened for best analyte sorption/desorption behaviors: 100 microm polydimethylsiloxane (PDMS), 65 microm polydimethylsiloxane/divinylbenzene (PDMS/DVB) and 65 microm Carbowax/divinylbenzene (CW/DVB). The PDMS/DVB and CW/DVB fibers were then evaluated for precision, and quantitative figures of merit were assessed for extractions using the PDMS/DVB fiber, which displayed the best overall performance. FIMS with the PDMS/DVB fiber allows simple extraction and MS detection and quantitation of DMP in water with good linearity and precision, and at concentrations as low as 3.6 microg L(-1). The LD and LQ of FIMS are below the maximum phthalate concentration allowed by the USEPA for drinking water (6 microg L(-1)).     

Mineral composition of fruit by-products evaluated by neutron activation analysis

Brazil is one of the largest producers of fruits cropping 40 million tons per year. In agro-food processing, approximately 50 % of raw material is discarded generating large amounts of by-products. The lack of information on the nutritional quality of agroindustrial by-products precludes their potential use in the manufacture of food products accessible to all. In this context, the objective of this work was to investigate the nutritional quality of by-products of the industrial processing of fruits. Samples of bagasse, peel and seeds of several fruits (banana, camu camu, coconut, cupuaçu, guava, jackfruit, mango, orange, papaya, pineapple, and soursop) were analysed by neutron activation analysis for the determination of Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sc and Zn. In general, higher levels of minerals were found in the by-products rather than in the pulps of fruits. This indicates that the use of the by-products should be encouraged, thereby reducing the economic and environmental impact of waste generated by agroindustrial processing.     

Transient responses of a wetting film to mechanical and electrical perturbations

This article reports real-time observations and detailed modeling of the transient response of thin aqueous films bounded by a deformable surface to external mechanical and electrical perturbations. Such films, tens to hundreds of nanometers thick, are confined between a molecularly smooth mica plate and a deformable mercury/electrolyte interface on a protuberant drop at a sealed capillary tube. When the mercury is negatively charged, the water forms a wetting film on mica, stabilized by electrical double layer forces. Mechanical perturbations are produced by driving the mica plate toward or by retracting the mica plate from the mercury surface. Electrical perturbations are applied to change the electrical double layer interaction between the mica and the mercury by imposing a step change of the bias voltage between the mercury and the bulk electrolyte. A theoretical model has been developed that can account for these observations quantitatively. Comparison between experiments and theory indicates that a no-slip hydrodynamic boundary condition holds at the molecularly smooth mica/electrolyte surface and at the deformable mercury/electrolyte interface. An analysis of the transient response based on the model elucidates the complex interplay between disjoining pressure, hydrodynamic forces, and surface deformations. This study also provides insight into the mechanism and process of droplet coalescence and reveals a novel, counterintuitive mechanism that can lead to film instability and collapse when an attempt is made to thicken the film by pulling the bounding mercury and mica phases apart.     

Influence of doped polyaniline on the interaction of Pu/PAni blends and on its microwave absorption properties

In this work, the influence of polyaniline (PAni) doped with both camphorsulfonic acid (PAni‐CSA) and dodecylbenzenesulfonic acid (PAni‐DBSA) on polyurethane (PU)/PAni blends was studied by rheological and morphological analyses. The effect of doped polyaniline on the attenuation of incident microwave radiation, in the frequency range from 8.0 to 12.0 GHz, was also investigated. The complex viscosity (η*) of PAni‐DBSA blends is observed to vary more significantly as a function of resting time than PAni‐CSA blends. This behavior is attributed to a better dispersion of PAni particles into the matrix on account of the presence of smaller agglomerates, as observed by optical and electron microscopy. However, this behavior has not been determinant on microwave absorption by the blends, with those that contain PAni‐CSA showing higher attenuation values. Copyright © 2007 John Wiley & Sons, Ltd.     

Firefly penalty-based algorithm for bound constrained mixed-integer nonlinear programming

In this article, we aim to extend the firefly algorithm (FA) to solve bound constrained mixed-integer nonlinear programming (MINLP) problems. An exact penalty continuous formulation of the MINLP problem is used. The continuous penalty problem comes out by relaxing the integrality constraints and by adding a penalty term to the objective function that aims to penalize integrality constraint violation. Two penalty terms are proposed, one is based on the hyperbolic tangent function and the other on the inverse hyperbolic sine function. We prove that both penalties can be used to define the continuous penalty problem, in the sense that it is equivalent to the MINLP problem. The solutions of the penalty problem are obtained using a variant of the metaheuristic FA for global optimization. Numerical experiments are given on a set of benchmark problems aiming to analyze the quality of the obtained solutions and the convergence speed. We show that the firefly penalty-based algorithm compares favourably with the penalty algorithm when the deterministic DIRECT or the simulated annealing solvers are invoked, in terms of convergence speed.     

Optimization of the ESI and APCI experimental variables for the LC/MS determination of s-triazines, methylcarbamates, organophosphorous, benzimidazoles, carboxamide and phenylurea compounds in orange samples

In this work, ten selected pesticides of different chemical groups, indicated to orange culture, were extracted and determined by liquid chromatography-mass spectrometry using both electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) operating in the positive ion detection mode. Applying a variables selection technique verified that cone voltage, source temperature and drying-gas flow-rate are the critical variables when the ESI was used, while cone voltage was found to be the only critical variable for the MS system, operating with the APCI ionization mode. After optimization of the most important parameters through the variables selection technique, the selected ion-recording (SIR) mode, monitoring the [M + H](+) species for all the compounds, was applied for the method validation of the pesticides, in both ionization modes. In orange samples, matrix effects did not interfere with the determination of the pesticides. Pesticides quantification limits ranged from 10 to 50 microg kg(-1) for ESI and from 8.2 to 45 microg kg(-1) for APCI. Linearity was studied from LOQ upto 200 times LOQ values (r > 0.98). Recoveries obtained were in the range of 70.2-100.5% (RSDs less than 10%). In order to guarantee that the identification and confirmation of the studied pesticides in real samples were unequivocal, characteristic fragment ions of the pesticides were obtained by varying the cone voltage (in-source CID).     

Production of Cyclodextrins from Cornstarch Granules in a Sequential Batch Mode and in the Presence of Ethanol

The influence of Toruzyme? cyclomaltodextrin glucanotransferase concentration and the presence of ethanol have been studied for the production of α-, β-, and γ-cyclodextrins (CDs) from 15% (w/v) cornstarch, at 65 °C and pH 6, with the aim of increasing CD yield. The selected concentrations for a single batch reactor were 10% (v/v) ethanol and 0.1% (v/v) enzyme, yielding after 12 h, 37% total CDs, of which 52.2% was α-CD, 38.8% β-CD, and 9.0% γ-CD. The enzyme specific activities per unit mass of protein for producing α-, β-, and γ-CD were 37.25, 19.61, and 8.63 U mg(-1), respectively. Total CD yield per milliliter of enzyme was 55 g. To increase CD yield per enzyme charge and thus reduce costs, the production of CDs was tested with two sequential batches in which a single enzyme charge was used. At the end of the first batch, the enzyme was adsorbed either on 65 °C pretreated starch granules or on raw starch, and a second batch was run with this material. The best result, in this case, was obtained for pretreated starch, increasing total CD produced by 57.4%, with 53.2% α-CD, 36.1% β-CD, and 10.7% γ-CD. CD yield per milliliter of enzyme was then 87 g.     

Antinociceptive and anti-inflammatory effects of a lectin-like substance from Clitoria fairchildiana R. Howard seeds

Lectins are proteins that have the ability to bind specifically and reversibly to carbohydrates and glycoconjugates, without altering the structure of the glycosyl ligand. They are found in organisms such as viruses, plants and humans, and they have been shown to possess important biological activities. The objective of this study was to purify and characterize lectins in the seeds of Clitoria fairchildiana, as well as to verify their biological activities. The results indicated the presence of a lectin (CFAL) in the glutelin acid protein fraction, which agglutinated native rabbit erythrocytes. CFAL was purified by column chromatography ion-exchange, DEAE-Sephacel, which was obtained from a peak of protein retained in the matrix by applying 0.5 M NaCl using the step-wise method. Electrophoretic analysis of this lectin in SDS-PAGE indicated a two band pattern protein molecular mass of approximately 100 and 116 kDa. CFAL proved to be unspecific to all carbohydrates/glycoconjugates in common use for the sugar inhibition test. This lectin showed no significant cytotoxicity to human red blood cells. It was observed that CFAL has anti-inflammatory activity in the paw edema induced by carrageenan model, in which a 64% diminution in edema was observed. Antinociceptive effects were observed for CFAL in the abdominal writhing test (induced by acetic acid), in which increasing doses of the lectin caused reduction in the number of contortions by up to 72%. It was concluded that the purified and characterized lectin from the seeds of Clitoria fairchildiana has anti-inflammatory and antinociceptive activity, and is not cytotoxic to human erythrocytes.