A ferrocene based palladacyclic precatalyst for the Suzuki cross-coupling of aryl chlorides

Addition of palladium acetate to 2-(dicyclohexylphosphino)-phenylferrocene gave palladacycle 16 that is a very effective precatalyst for the Suzuki cross-coupling of aryl chlorides at room temperature (1 mol% 16) or 60 degrees C (> or = 0.01 mol% 16).     

过碳酸钠-醋酸酐作用下的Baeyer-Villiger反应

在醋酸酐介质中, 过碳酸钠可以与酮进行Baeyer-Villiger反应, 将它们氧化成相应的酯。其中脂环酮的反应结果较好, 环内酯的产率约为80%。芳香酮除芳环被活化的以外, 效果欠佳。当反应施加超声辐射后可显著加快反应速度, 并对过碳酸钠的作用机理进行了讨论。     

瓯柑石油醚提取物的GC-MS分析

为了研究瓯柑的挥发性成分和脂溶性成分, 采用GC-MS分析法进行分离鉴定, 并用面积归一法确定各成分的质量分数. 从瓯柑果肉石油醚提取物中分离鉴定出11种成分, 占总提取物的97.43%, 其主要成分为(Z, Z)-9, 12-十八碳二烯酸(37.46%)、γ-谷甾醇(22.91%);从瓯柑皮石油醚提取物中分离鉴定出10种成分, 占总提取物的99.79%, 其主要成分为柠檬烯(86.39%).     

Enthalpic determinations of aliphatic ester-solvent systems with correlations

Calorimetric measurements were carried out on ester-solvent systems where the esters were H(CH₂)_xCOO(CH₂)_yH, with x and y varying from 1 to 5, and the solvents were n-hexane and 1,2-dichloroethane. Calculation of the enthalpies of cavity formation enabled the enthalpies of interaction to be determined. Both enthalpies correlated with number of carbon atoms N, equal to x+y in the esters, giving for 1,2-dichloroethane

A new anode material LiMoS2 for use in rechargeable Lithium Ion Batteries

The novel applications of molybdenum disulfide in recent research were reviewed, such as in lubricant, catalyst and photoelectrochemical solar cells. Recently, we found that LiMoS2 is a good candidate for new anode materials for lithium ion batteries with high lithium storage capacity.Here, the anode material LiMoS2 was synthesized by a hydrothermal method at 150℃ and the electrochemical characterization as an anode material for lithium ion batteries was examined.put in Teflon-lined stainless steel autoclaves of capacity 40 mL. Distilled water was used to fill the autoclaves to 70 % of the total volume. The autoclaves were maintained at 150℃ for 24 h and then cooled naturally. The resulting dark-gray powders were filled and washed with distilled water,diluted hydrochloric acid and ethanol, successively. The final products were dried at 80℃ for 24 h.The powder X-ray diffraction pattern showed the prepared LiMoS2 was amorphous structure. A test cell using LiMoS2 as the active material was discharged and charged between 3 and 0.01 V with respect to Li metal at a constant current density of C/5 (that is, one lithium per formula unit in 5 hours). During the first discharge, the potential rapidly drops to reach a large plateau at 2.2 V, then slowly drops to the other plateau at 0.8 V, and then continuously decreases down to 0.01V. There is only a plateau at 1.35 V in the subsequent discharge curves. The plateaus of charge potential appear at about 1.9 V.The irreversible loss was 41% in the first cycle. The ratio of discharge and charge is more than 99%in the subsequent cycles. Moreover, the ratio of discharge and charge almost reaches 100% after thedemonstrated that LiMoS2 has a very high capacity and a good cycle-ability as an anode material forlithium ion batteries.     

Excimer-laser-assisted RF glow-discharge deposition of amorphous and microcrystalline silicon thin films

We combine the deposition of Hydrogenated amorphous Silicon (a-Si:H) by rf glow discharge with XeCl-excimer laser irradiation of the growing surface in order to obtain different kinds of silicon films in the same deposition system. In-situ UV-visible ellipsometry allows us to measure the optical properties of the films as the laser fluence is increased from 0 up to 180 mJ/cm² in separate depositions. For fixed glow-discharge conditions and a substrate temperature of 250° C we observe dramatic changes in the film structure as the laser fluence is increased. With respect to a reference a-Si:H film (no laser irradiation) we observe at low laser fluences (15–60 mJ/cm²) that the film remains amorphous but demonstrates enchanced surface roughness and bulk porosity. At intermediate fluences (80–165 m/Jcm²), we obtain an amorphous film with an enhanced density with respect to the reference film. Finally, at high fluences (165–180 mJ/cm²), we obtain microcrystalline films. The in-situ ellipsometry measurements are complemented by ex-situ measurements of the dark conductivity, X-ray diffraction, and Elastic Recoil Detection Analysis (ERDA). Simulation of the temperature profiles for different film thicknesses and for three laser fluences indicates that crystallization occurs if the surface temperature reaches the melting point of a-Si:H ( 1420 K). The effects of laser treatment on the film properties are discussed by taking into account the photonic and thermal effects of laser irradiation.Presented at LASERION 93, Munich, June 21–23, 1993     

On the nature of the transition state in catechol O-methyltransferase. A complementary study based on molecular dynamics and potential energy surface explorations

The way in which enzymes influence the rate of chemical processes is still a question of debate. The protein promotes the catalysis of biochemical processes by lowering the free energy barrier in comparison with the reference uncatalyzed reaction in solution. In this article we are reporting static and dynamic aspects of the enzyme catalysis in a bimolecular reaction, namely a methyl transfer from S-adenosylmethionine to the hydroxylate oxygen of a substituted catechol catalyzed by catechol O-methyltransferase. From QM/MM optimizations, we will first analyze the participation of the environment on the transition vector. The study of molecular dynamics trajectories will allow us to estimate the transmission coefficient from a previously localized transition state as the maximum in the potential of mean force profile. The analysis of the reactive and nonreactive trajectories in the enzyme environment and in solution will also allow studying the geometrical and electronic changes, with special attention to the chemical system movements and the coupling with the environment. The main result, coming from both analyses, is the approximation of the magnesium cation to the nucleophilic and the hydroxyl group of the catecholate as a result of a general movement of the protein, stabilizing in this way the transition state. Consequently, the free energy barrier of the enzyme reaction is dramatically decreased with respect to the reaction in solution.     

环戊二烯基氟尿嘧啶基钛（Ⅳ）、锆（Ⅳ）配合物的合成及其抗肿瘤活性的研究

用（ＲＣｐ）２ＭＣｌ２和（ＲＣｐ）ＴｉＣｌ３（Ｒ＝Ｈ，Ｍｅ；Ｍ＝Ｔｉ，Ｚｒ）分别与具有生物活性的２－甲氧基－５－氟尿嘧啶、２－甲硫基－５－氟尿嘧啶在甲苯溶剂中１１０℃下反应，合成了２０个未见报道的（ＲＣｐ）·Ｍ（Ｏｐｍ）２Ｃｌ、（ＲＣｐ）２Ｍ（ＯＰｍ）Ｃｌ和（ＲＣｐ）Ｍ（ＯＰｍ）Ｃｌ２（ＯＰｍ＝２－甲氧基－５－氟尿嘧啶基，２－甲硫基－５－氟尿嘧啶基）型钛锆配合物，这些配合物均经元素分析、１ＨＮＭＲ、ＩＲ光谱鉴定．初步动物试验表明，配合物１、４、１１、１４对小白鼠移植性艾氏腹水场的抑制作用居首，而配合物２、３、５、６、１２、１３、１５、１６次之，其它锆配合物几乎没有抑制作用。     

微波辅助-光催化降解氯酚的QSPR研究

本文运用PM3算法计算得到氯酚(CPs)的分子结构参数,并结合光解速率进行PLS分析,建立了速率与量子化参数之间的关系模型,模型的Q2cum分别为0.8776和0.9545(>0.5),具有良好的预测能力。研究结果表明,参数Ehomo、Elumo Ehomo、Elumo、N、Mw、Elumo-Ehomo、(Elumo-Ehomo)2是决定CPs光解速率的主要因素;CPs的光解速率随Ehomo、Elumo Ehomo、Elumo、Elumo-Ehomo、(Elumo-Ehomo)2的增大而增大,随N、Mw的增大而减小。