New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

Thermal behavior of furosemide

Data from theoretical, thermal, and spectroscopic methods were compared in order to map a possible mechanism for the thermal decomposition of furosemide, a diuretic compound, in solid state. TG/DTG curves suggested a two-stage decomposition process. The first product of decomposition is water (m/z = 18), released due to a dimerization resulting in the formation of an amide. Then carbon dioxide (m/z = 44), nitroxide (m/z = 30), and 2-methyl-furanyl ion (m/z = 81) are released in the second stage. The chlorine substituted benzene ring, due to the double bond conjugated system, being the last fraction to decompose. Theoretical calculations presented are in agreement with experimental results.     

Performance of hydrophobic interaction ligands for human membrane‐bound catechol‐O‐methyltransferase purification

Despite of membrane catechol‐O‐methyltransferase (MBCOMT, EC 2.1.1.6) physiological importance on catecholamines’ O‐methylation, no studies allowed their total isolation. Therefore, for the first time, we compare the performance of three hydrophobic adsorbents (butyl‐, epoxy‐, and octyl‐Sepharose) in purification of recombinant human COMT (hMBCOMT) from crude Brevibacillus choshinensis cell lysates to develop a sustainable chromatographic process. Hydrophobic matrices were evaluated in terms of selectivity and hMBCOMT's binding and elution conditions. Results show that hMBCOMT's adsorption was promoted on octyl and butyl at ≤375 mM NaH₂PO_4, while on epoxy higher concentrations (>850 mM) were required. Additionally, hMBCOMT's elution was promoted on epoxy, butyl, and octyl using respectively 0.1–0.5, 0.25–1, and 1% of Triton X‐100. On butyl media, a stepwise strategy using 375 and 0 mM NaH₂PO₄, followed by three elution steps at 0.25, 0.7 and 1% Triton X‐100, allowed selective hMBCOMT isolation. In conclusion, significant amounts of MBCOMT were purified with high selectivity on a single chromatography procedure, despite its elution occurs on multiple peaks. Although successful applications of hydrophobic interaction chromatography in purification of membrane proteins are uncommon, we proved that traditional hydrophobic matrices can open a promising unexplored field to fulfill specific requirements for kinetic and pharmacological trials.     

Synthesis and Spectral Studies of Some Novel 2,5,9,10-Tetrahydro [7,8-g]benzo-8-arylpyrazolo[4,5-e][1,5-b]benzoxazonine via Phase Transfer Catalysis

Treatment of 1H-4,5-dihydro-3-aryl-5-(2-hydroxyaryl)pyrazole with o-dibromoxylene under liquid-liquid phase transfer catalytic conditions using tetra-n-butylammonium hydrogen sulphate or [18]-crown-6 as PT catalyst, benzene/chloroform as organic phase and 50% aqueous potassium hydroxide as second phase, afforded novel 2,5,9,10-tetrahydro [7,8-g] benzo-8-arylpyrazolo[4,5-e] [1,5-b] benzoxazonines.     

Theoretical investigation of the alloxan–dialuric acid redox cycle

The redox cycle between alloxan, a mild oxidizing agent, and its reduction partner, dialuric acid, is investigated using density functional theory. It is found that the initial step is the one‐electron reduction of alloxan followed by protonation, yielding a stable neutral radical, AH^·. The radical can then accept another electron to form the dialuric acid anion. The formation of this anion is thermodynamically favored in both the gas phase and in solution. The radical may also undergo dimerization to alloxantin, followed by the transfer of a proton from one moiety to another, yielding alloxan and dialuric acid. This reduction is thermodynamically feasible in the gas phase, but not in aqueous solution. In the case of reduction of alloxan by glutathione at the physiological pH, computed redox potentials indicate that a two‐electron reduction is the favored course of reaction, yielding directly the dialuric acid anion, which then undergoes aerial oxidation to yield the superoxide radical. The redox cycling between alloxan and dialuric acid is responsible for the diabetogenic activity of alloxan, producing cytotoxic radicals on reoxidation of dialuric acid. © 2013 Wiley Periodicals, Inc.     

Regioselective Photocyclization Reactions of 3‐Allyloxy‐6‐chloro‐2‐(thiophen‐3‐yl)‐4H‐chromen‐4‐one: Solvent Effect

The photo‐irradiation of thienylchromenone resulted in the regioselective cyclization which is exclusively controlled by the nature of solvent used as reaction medium. Compared to nonpolar medium, polar solvent furnished a diverse array of novel angular tetracyclic photoproducts with gem‐dihydro functionality and exocyclic double bonds on the fused pyran ring, which is unprecedented to best of our knowledge.     

Oxidative Addition of 4-Hydroxycoumarin to Alkenes. An Expeditious Entry to 2,3-Dihydro-4H-furo-[3,2-c][1]benzopyran-4-ones1

In the presence of one-electron metal oxidants (CAN, MAH), 4-hydroxycoumarin (1) adds to alkenes to give 2,3-dihydro-4H-furo[3,2-c][1]benzopyran-4-ones.     

Total Synthesis of Pulchellalactam via an RCM Strategy

Total synthesis of (Z) pulchellalactam, a CD protein tyrosine phosphatase inhibitor, from commercially available methallyl chloride employing ring‐closure metathesis (RCM) as a key step is described.     

Preparation of porous titania–silica microspheres for treatment of radioactive waste

Titania–silica microspheres have been prepared by sol–gel process. Internal gelation route, which use hexamethylenetetramine as the source of ammonia was used for the preparation spherical gel particles. A cationic surfactant, cetrimide was added in the feed broth for introducing meso-porosity in the gel network. Further paraffin oil emulsion was incorporated in the feed broth before gelation for the formation of larger pores in the gel network. The spherical gel particles thus obtained were washed and heat treated under controlled conditions to remove the entrapped surfactant, paraffin oil and other organic compounds resulting in highly porous intact titania–silica microspheres. The material was characterized by surface area, porosity and by SEM photomicrographs. The ion exchange property of this material was studied using the sorption of plutonium on this material from carbonate medium by distribution coefficient studies and ion exchange column loading and elution experiments.     

Biphasic kinetic investigations on the evaluation of non-salt forming reductants for Pu(IV) stripping from tributyl phosphate and N,N-dihexyl octanamide solutions in n-dodecane

The relative stability of different oxidation states of actinide elements is influenced by the nature of complexes formed and redox equilibria in aqueous/non-aqueous solutions. The reduction/stripping studies on Pu(IV) ions from loaded organic phases of 1.1 M tributyl phosphate and of 1.1 M N,N-dihexyl octanamide in n-dodecane were studied using organic soluble tert-butyl hydroquinone (TBH) and aqueous soluble reductants like acetaldoxime (AX) and hydroxyurea (HU). These studies were carried out as a function of reductant and nitric acid concentration (0.5–4 M HNO₃) and of time. The changes in Pu oxidation states were followed by spectrophotometry for TBH and by distribution ratio values for AX and HU as reductants. Spectrophotometric investigations using TBH as reductant showed that it was desirable to strip Pu(III) formed after reduction of Pu(IV) in the organic phase, which may otherwise be reconverted to extractable Pu(IV) by in situ generated HNO₂ from oxidative degradation of TBH to tert-butyl quinone. Similarly, the biphasic reduction/stripping of Pu(IV) using AX and HU as reductant rate was affected adversely with increased aqueous phase acidity. This data will help in the accurate simulation of Pu separation processes using these reductants in mixer-settlers/pulsed columns or centrifugal contactors.