Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Interaction of aryldiazonium salts with some schiff-base complexes of cobalt and ruthenium

The interaction of aryldiazonium ions with some Schiff-base complexes of cobalt and ruthenium have been studied. With cobalt, one-electron oxidation of [Co(II)Salen] occurred; with [Co(I)Salen] the corresponding Co(III)-aryl complexes were isolated. In the case of ruthenium oxidation also occurs, [Ru(Salen)(CO)py] gave the corresponding monocation. The results, especially for ruthenium, are in contrast to the stabilisation of both nitrosyl and aryldiazonium adducts in analogous porphyrin complexes.     

Fluorescence quenching of anthropogenic fulvic acids by Cu(II), Fe(III) and UO(2)(2+)

The quenching of the fluorescence of three anthropogenic fulvic acids (FA) provoked by Cu(II) (pH 6.0), Fe(III) (pH 4.0) and UO₂²⁺ (pH 3.5), was analyzed by a non-linear method and by Stern-Volmer plots. The FA samples were extracted from composted sewage sludges (csFA), composted municipal wastes (mwFA) and composted livestock wastes (lsFA). Synchronous-scan fluorescence (SyF) spectra were collected as a function of metal ion concentration. Spectral data were treated by a self-modeling mixture analysis method (SIMPLISMA) to detect the SyF spectral band with the strongest quenching and to calculate the corresponding quenching profile. The analysis of these profiles by a non-linear method allowed the estimation of conditional stability constants (K) and of the percentage of non-complexing fluorophores. The same quantitative information was obtained by the modified Stern-Volmer equation taking into account the existence of fluorophores that do not participate in the complexation. Good agreement was found between the results of the two procedures. The log K calculated by the non-linear method were (standard deviation in parenthesis): csFA, Cu(II), 4.22 (5); Fe(III), 5.0 (1); UO₂²⁺, 5.2 (2); mwFA, Cu(II), 4.21 (3); Fe(III), 5.6 (2); UO₂²⁺, 4.7 (3); lsFA, Cu(II), 4.51 (8); Fe(III), 5.5 (2); UO₂²⁺, 3.6 (2).     

Surface-enhanced Raman scattering and micro-Raman imaging of Langmuir-Blodgett films of rhodium phthalocyanine

Rhodium phthalocyanine (RhPc) was synthesized and ultra thin Langmuir-Blodgett (LB) films of RhPc were successfully fabricated. The LB film characterization was carried out using both UV-vis absorption spectra and Raman scattering. The Raman spectroscopy was carried out using 633 and 780 nm laser lines. LB films were deposited onto Ag nanoparticles to achieve the surface-enhanced pre-resonance Raman scattering (pre-SERRS) and surface-enhanced Raman scattering (SERS) for both laser lines, respectively, which allowed the characterization of the RhPc ultra thin films. The morphology of the LB RhPc neat film is extracted from micro-Raman imaging.     

Assembly of the hexameric Escherichia coli arginine repressor investigated by nano-electrospray ionization time-of-flight mass spectrometry

The arginine repressor (ArgR) from Escherichia coli regulates genes for L-arginine metabolism and is a required recombination factor for colE1 plasmid replication. Both functions require binding of L-arginine to the protein. In this work, nano-electrospray ionization time-of-flight mass spectrometry (nano-ESI-TOFMS) is used to study conformational and oligomeric states of intact ArgR and its isolated structural domains. In agreement with X-ray diffraction studies, it is shown that ArgR oligomerizes to form hexamers in both the presence and absence of L-arginine, and the basic unit of oligomerization appears to be the trimer. Higher-order assembly into dodecamers is also detected. The isolated C-terminal domain is found to associate into trimers and hexamers whereas the N-terminal domain is detected in its monomeric form. The observed species distributions suggest a role for the N-terminal domain in hexamer stabilization.     

Theoretical study on the adsorption of aromatic compounds on platinum clusters

B3 LYP hybrid functional with LACVP* pseudopotential was applied for the optimization of geometries of complexes resulting from interaction of benzene, pyridine, naphthalene, and quinoline with Pt_n (n = 4, 7) clusters. For benzene‐containing complexes, the most stable form corresponds to a bridge adsorption, with benzene undergoing considerable geometric distortions, assuming a boat‐like conformation. C? H bonds are bended upward from the plane of the cluster. C? C bonds stretch, especially when they form π‐complexes with low coordinated Pt atoms. Some arrangements for pyridine complexes involving the N atom of the organic moiety undergo further distortions, apparently preserving a formal C? N π bond. Except for that distortion, the behavior of any heteroaromatic complex is similar to that of benzene in the same arrangement. The quinoline–Pt₇ complex can suitably be used for simulation of the cinchonidine (CD) anchorage over Pt. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

Composting of urban solid residues (USR) by different dispositions

The thermal behavior and non-isothermal kinetics of thermal decomposition of three different kinds of composting of the USR like: stack with drilled PVC tubes (ST), revolved stack (SR) and stack with material of structure (SM), from the usine of composing of Araraquara city, Săo Paulo state, Brazil, within a period of 132 days of composting were studied. Results from TG, DTG and DSC curves obtained on inert atmosphere indicated that the cellulosic fraction present, despite the slow degradation during the composting process, is thermally less stable than other substances originated from that process. Due to that behavior, the cellulosic fraction decomposition could be kinetically evaluated through non-isothermal methods of analysis. The values obtained were: average activation energy, Ea=248, 257 and 259 kJ mol^-1 and pre- exponential factor, logA=21.4, 22.5, 22.7 min^-1, to the ST, SR and SM, respectively. From Ea and logA values and DSC curves, Málek procedure could be applied, suggesting that the SB (Šesták-Berggren) kinetic model is the appropriated one to the first thermal decomposition step. This revised version was published online in July 2006 with corrections to the Cover Date.     

A boxmodel development to study the relationships between the photo-oxidants and the particles formation in the troposphere

The model BAGS (Boxmodel for Aerosol and Gasphase Simulations) has been developed. It is composed of two major modules: the first one describes the system of the chemical reactions in the gaseous phase, the second one calculates the aerosol chemical composition and the dimensional distribution of the particles. The boxmodel has been developed with the introduction of new chemical and physical processes, not previously included, in particular the formation of Secondary Organic Aerosol. The other implemented processes are a module for the dynamic of the particle population, nucleation, coagulation and dry deposition. The last phase of the work has been a check of the BAGS capabilities by a series of tests, that have permitted to compare it with other models (MAPS and MADM). The tests in particular have concerned the aerosol water content prediction, the photochemistry, the condensation of the inorganic compounds and the formation of Secondary Organic Aerosol.     

Atomization of Al in a tungsten coil electrothermal atomic absorption spectrophotometer

Electrothermal atomic absorption spectrophotometry of Al in a tungsten coil atomizer was evaluated and applied for its determination in hemodialysis fluid. The system was mounted on a Varian Spectra AA-40 spectrophotometer with continuum background correction and all measurements, in peak height absorbance, were done at 309.3 nm. The purge gas was a mixture of 90% Ar plus 10% H(2). Observation height, gas flow, drying, pyrolysis and atomization steps were optimized. The heating program was carried out by employing a heating cycle in four steps: dry, pyrolysis, atomization and clean. The determination of Al in hemodialysis solutions was performed by using a matrix-matching procedure. Al in hemodialysis solutions was determined by TCA and by electrothermal atomization with a graphite tube atomizer. There is no differences between results obtained by both methods at a confidence level of 95%. The characteristic mass of Al by using the TCA was 39 pg and the detection limit was 2.0 mug l(-1).     

Coordination chemistry of f-block elements with imine acids. Part IV. Synthetic and chiroptical studies on lanthanide(III) complexes of imine acids derived from L-alanine,L-valine,L-tyrosine and L-glutamic acid

Summary N-(orthovanillidene)L-alanine (OVAlaH₂), N-(salicylidene)L-valine (SValH₂), N-(orthovanillidene)L-valine (OVValH₂), N-(orthovanillidene)L-tyrosine (OVTyrH₃) and N-(salicylidene)L-glutamic acid (SGluH₃) react with La^III, Pr^III, Nd^III and Sm^III to yield new chiral complexes. Their dominant conformers were determined from c.d. spectra supported by¹H n.m.r. data, except for the L-glutamic acid derived complexes which were insoluble.