Biopolymer Synthesized by Strains of Xanthomonas sp Isolate from Brazil Using Biodiesel-Waste

The future supplies and usage of glycerol are expected to increase as biodiesel plants increase production, and the output will greatly outpace demand. Biodiesel production has already had a significant impact on the price of refined glycerol. A major concern of glycerol producers is the reduced price of glycerol resulting from the increased production of biodiesel. Some alternative uses for this glycerol that have been investigated are substrates for fermentation process or the production of biosurfactants, fatty acids, biopolymers, and others products. This work had as objective to evaluate two strains of Xanthomonas sp isolate from Brazil for xanthan gum in orbital agitator, analizing the apparent viscosity of aqueous solutions and selecting viscosity. The experiments of xanthan gum production were realized in orbital agitator with 120 rpm agitation, for cells production, and 180rpm, for biopolymer production, under a 28 °C temperature. The rheology of the fermentation broth was analyzed by apparent viscosity and the polymer was recovered with ethanol (1:3, v/v). After its recovery, the productivity evaluation was performed. The productivity were 0.157 and 0.363 gL⁻¹ for C1 and 0.186 and 0.363 gL⁻¹ for C9 to media glycerol or glycerol and sucrose, respectively. The viscosity analysis was performed for aqueous solutions 3%, at 25 °C, the best apparent viscosity was obtained using gum synthesized with glycerol and sucrose (50:50) at 25 °C, 143 mPa.s⁻¹ from Xanthomonas sp C1.     

Colour diversification in octocorals based on conjugated polyenes: A Raman spectroscopic view

Polyenic pigments in octocorals have been investigated by Raman spectroscopy using laser excitation at 532, 785 and 1064 nm. The spectral features suggest the structural nature of carotenoids from Phyllogorgia dilatata, Leptogorgia punicea, Muricea atlantica, Carijoa riisei and conjugated polyenals from L. punicea, L. setacea, Muricea flamma and Renilla muelleri. The observed vibrational bands at ca. 1540–1520 ν₁(C=C), 1159 ν₂(C–C) and 1005 cm⁻¹ ρ₃(C–CH₃) were assigned to carotenoids, whereas the identification of non‐methylated conjugated polyenals have been proposed due to two major Raman bands at ca. 1500 and 1120 cm^‐1, assigned to ν(C=C) and ν(C–C), respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Phase diagram of a 2D Ising model within a nonextensive approach

In this work we report Monte Carlo simulations of a 2D Ising model, in which the statistics of the Metropolis algorithm is replaced by the nonextensive one. We compute the magnetization and show that phase transitions are present for q ≠ 1. A q - phase diagram (critical temperature vs. the entropic parameter q) is built and exhibits some interesting features, such as phases which are governed by the value of the entropic index q. It is shown that such phases favors some energy levels of magnetization states. It is also shown that the contribution of the Tsallis cutoff is capital to the existence of phase transitions.     

Photoelectrochemical platform for sensing propyl gallate in edible oil samples based on CdTe quantum dots and poly(D-glucosamine)

Journal of Solid State Electrochemistry - This paper reports the development of a photoelectrochemical platform based on indium tin oxide (ITO) electrode modified with carboxyl-functionalized...     

Chinese Oak Tasar Silkworm Antheraea pernyi Silk Proteins: Current Strategies and Future Perspectives for Biomedical Applications

Chinese nonmulberry temperate oak tasar/tussah, Antheraea pernyi (Ap) silk is a natural biopolymer that has attracted considerable attention as a biomaterial. The proteinaceous components of Ap silk proteins, namely fibroin and sericin may represent an alternative over mulberry Bombyx mori silk proteins. In fact, the silk fibroin (SF) of Ap is rich in Arginyl‐Glycyl‐Aspartic acid (RGD) peptides, which facilitate the adhesion and proliferation of various cell types. The possibility of processing Ap silk proteins into different distinct 2D‐ and 3D‐based matrices is described in earlier studies, such as membranes, nanofibers, scaffolds, and micro/nanoparticles, contributing to a different rate of degradation, mechanical properties, and biological performance useful for various biomedical applications. This review summarizes the current advances and developments on nonmulberry Chinese oak tasar silk protein (fibroin and sericin)‐based biomaterials and their potential uses in tissue engineering, regenerative medicine, and therapeutic delivery strategies.     

X-ray diffuse scattering measurements of nucleation dynamics at femtosecond resolution

Femtosecond time-resolved small and wide angle x-ray diffuse scattering techniques are applied to investigate the ultrafast nucleation processes that occur during the ablation process in semiconducting materials. Following intense optical excitation, a transient liquid state of high compressibility characterized by large-amplitude density fluctuations is observed and the buildup of these fluctuations is measured in real time. Small-angle scattering measurements reveal snapshots of the spontaneous nucleation of nanoscale voids within a metastable liquid and support theoretical predictions of the ablation process.     

Probing unfolded acoustic phonons with X rays

Ultrafast laser excitation of an InGaAs/InAlAs superlattice (SL) creates coherent folded acoustic phonons that subsequently leak into the bulk (InP) substrate. Upon transmission, the phonons become "unfolded" into bulk modes and acquire a wave vector much larger than that of the light. We show that time-resolved x-ray diffraction is sensitive to this large-wave vector excitation in the substrate. Comparison with dynamical diffraction simulations of propagating strain supports our interpretation.     

Metastable and stable pitting events at zinc passive layer in alkaline solutions

The electrochemical behavior of Zn in 0.5 M NaOH solutions containing various concentrations (0.01–0.1 M) of ClO₃ ^? or ClO₄ ^? anions was studied with potentiodynamic anodic polarization and chronoamperometry techniques. Microstructural and topographical characterization of the pitted surfaces was carried out by ex situ scanning electron microscopy and atomic force microscopy examinations. Addition of either ClO₃ ^? or ClO₄ ^? stimulated general corrosion and ruptured the passive layer (stable pitting), with ClO₃ ^? being more aggressive than ClO₄ ^?. Metastable pitting events appear as current oscillations (spikes) at potentials close to the pitting potential when Cl^? ions are produced by cathodic reduction of ClO₃ ^? and ClO₄ ^? before passive layer growth. Current–time measurements are performed at fixed potential after production of Cl^? ions and show that the rate of metastable pitting and the intensity of current spikes increase with the potential and the concentration of aggressive anions. Concepts of thin film growth are applied to the passive layer formation in order to explain those results. Metastable events are related to the presence of defects in the passive layer because their frequency and intensity are enhanced in conditions that favor defect formation and roughening in growing films, while stable pitting typically occurs at regions of high metal disorder.     

Design and experimental validation of a nonlinear controller for underactuated surface vessels

Nonlinear Dynamics - This paper addresses the problem of trajectory tracking control of an underactuated surface vessel moving in a two-dimensional space in the presence of unknown disturbances. In...