Investigation of the alumina properties with adsorbed polyvinyl alcohol

The influence of solution pH on the structure of polyvinyl alcohol adsorption layer on the alumina surface was investigated. The spectrophotometry, viscosimetry, thermogravimetry, potentiometric titration and microelectrophoresis were applied in experiments. These methods enable determination of the following parameters: adsorbed amount of PVA, stability of suspension without and with polymer, thickness of its adsorption layers, changes in thermal characteristics of Al₂O₃ surface with the adsorbed polymer, surface charge density and zeta potential of solid particles in the presence and absence of PVA, respectively. All measurements were carried out in the pH range 3–9. The obtained results indicate that pH has a great influence on the conformation of PVA chains adsorbed on the alumina surface. It is due to incomplete hydrolysis of acetate groups of polyvinyl alcohol macromolecules (degree of hydrolysis 97.5%), which dissociate with the increasing pH. Moreover, the polymer adsorption on the alumina surface causes changes in the course of thermogravimetric curves. The effect of weight loss for Al₂O₃–PVA systems is smaller than that of Al₂O₃ without polymer. It is due to elimination of water molecules from the solid surface by adsorbed polymer.     

Surface‐Plasmon‐Coupled Emission of Rhodamine 110 in a Silica Nanolayer

The first observation of strong directional surface‐plasmon‐coupled emission (SPCE) of Rhodamine 110 in silica nanofilms deposited on silver nanolayers is reported. The preparation of the material is described in detail. The intensity of SPCE exceeds 10 times that of free space fluorescence and total linear light polarization in the SPCE ring is observed. A new experimental setup and an original data collection method is presented. Our material completely preserves its fluorescence properties for at least eight months.     

Single dibenzoterrylene molecules in naphthalene and 2,3-dimethylnaphthalene crystals: vibronic spectra

Fluorescence excitation spectra of single dibenzoterrylene (DBT) molecules embedded in naphthalene (N) and 2,3-dimethylnaphthalene (2,3-DMN) crystals were studied at 5 K. The frequencies characterizing the vibronic structure of single DBT molecules in an N crystal agree with the theoretical prediction for the isolated DBT molecule. The 'dipolar' disorder encountered in 2,3-DMN crystals leads to a broad distribution of frequencies of the (0,0) lines of single DBT molecules. Moreover, the observed vibronic frequencies and intensities in the spectrum of DBT in 2,3-DMN crystals are slightly different to those in an N crystal. We conclude that the structure of DBT molecules in a 2,3-DMN crystal is disturbed in comparison with isolated DBT and the main change concerns its central tetracene moiety.     

Cold heteromolecular dipolar collisions

Cold molecules promise to reveal a rich set of novel collision dynamics in the low-energy regime. By combining for the first time the techniques of Stark deceleration, magnetic trapping, and cryogenic buffer gas cooling, we present the first experimental observation of cold collisions between two different species of state-selected neutral polar molecules. This has enabled an absolute measurement of the total trap loss cross sections between OH and ND(3) at a mean collision energy of 3.6 cm(-1) (5 K). Due to the dipolar interaction, the total cross section increases upon application of an external polarizing electric field. Cross sections computed from ab initio potential energy surfaces are in agreement with the measured value at zero external electric field. The theory presented here represents the first such analysis of collisions between a (2)Π radical and a closed-shell polyatomic molecule.     

EWOD driven cleaning of bioparticles on hydrophobic and superhydrophobic surfaces

Environmental air monitoring is of great interest due to the large number of people concerned and exposed to different possible risks. From the most common particles in our environment (e.g. by-products of combustion or pollens) to more specific and dangerous agents (e.g. pathogenic micro-organisms), there are a large range of particles that need to be controlled. In this article we propose an original study on the collection of electrostatically deposited particles using electrowetting droplet displacement. A variety of particles were studied, from synthetic particles (e.g. Polystyrene Latex (PSL) microsphere) to different classes of biological particle (proteins, bacterial spores and a viral simulant). Furthermore, we have compared ElectroWetting-On-Dielectric (EWOD) collecting efficiency using either a hydrophobic or a superhydrophobic counter electrode. We observe different cleaning efficiencies, depending on the hydrophobicity of the substrate (varying from 45% to 99%). Superhydrophobic surfaces show the best cleaning efficiency with water droplets for all investigated particles (MS2 bacteriophage, BG (Bacillus atrophaeus) spores, OA (ovalbumin) proteins, and PSL).     

Supravital fluorometric apoptosis detection in a single mouse embryo using lab-on-a-chip

Detection of apoptosis is one of the main criteria of preimplantation embryo growth potential assessment. Recent developments in lab-on-a-chip techniques has led to apoptosis detection and monitoring on a single cell or embryo level. However, single embryo apoptosis detection without a change in embryo developmental competence and post-examination "recovery" still remains a challenge. In this paper we present a lab-on-a-chip, co-working with miniaturized optical instrumentation, which allows supravital examination of single embryos for the presence of apoptotic blastomers with full after lab-on-a-chip study "recovery" and maintenance of their further developmental capacity.     

Mathematical modelling of rate-independent pseudoelastic SMA material

The paper presents a procedure for the formulation of constitutive equations for rate-independent pseudoelastic SMA material models. The procedure applies a rheological scheme representing mechanical properties of the material. An additive decomposition of strains into two parts is proposed. The first part describes strains of a perfectly elastic body while the second part may be represented by a combination of a rigid perfectly elastic body and a rigid perfectly plastic body. It is demonstrated that the key problem of formulation of constitutive relationships is to derive the 1st order differential equation with respect to the tensor describing the second part of the strain field. This equation may be obtained in explicit form starting from the variational inequalities defining non-elastic parts of rheological model. The uniqueness of the obtained differential equation has been proved. A numerical implementation of the constitutive relationships of SMA material was done through the user subroutine module VUMAT within the FE commercial code ABAQUS/Explicit. As an example we analyzed the problem of vibration of a simple 3D structure made of SMA.     

An instrumented vehicle for offroad dynamics testing

The paper presents an instrumented vehicle that was equipped with measuring systems to perform complete dynamics tests, especially in off-road conditions. The equipment consists of four wheel dynamometers, a steering robot, and a differential GPS system together with an inertial platform, a non-contact vehicle speed sensor, and an on-board computer with software to control the devices and collect experimental data. The four wheel dynamometers measure six elements; based on strain gage force transducers, it measures three orthogonal forces and three moments. The steering robot can control the steering wheel of the vehicle at a variety of excitation modes; it can carry out typical vehicle dynamics tests (ISO 7401, ISO 4138, ISO/TR3888, etc.) as well as custom engineered tests at a wide range of setting parameters (steer angle rate up to 1600 deg/s). The differential GPS system gives true time vehicle kinematics data (velocities, accelerations, angles, etc.) at 10-ns sample rate and 20-mm accuracy. The base vehicle, a Suzuki Vitara 4 × 4, required no special modifications or changes to install the measuring equipment. The paper also describes typical tests performed with the use of the instrumented vehicle together with sample results.     

On typically real functions which are generated by a fixed typically real function

Let T be the family of all typically real functions, i.e. functions that are analytic in the unit disk Δ:= {z ∈ ℂ: |z| < 1}, normalized by f(0) = f′(0) − 1 = 0 and such that Imz Im f(z) ⩾ 0 for z ∈ Δ.