Atomic Hydrogen Induced Chemical Vapor Deposition of Silicon Oxycarbide Thin Films Derived from Diethoxymethylsilane Precursor

Amorphous silicon oxycarbide (a-SiOC:H) films produced by remote plasma RPCVD from diethoxymethylsilane (DEMS) were characterized in terms of their basic properties related to the coatings deposited using conventional plasma enhanced PECVD method. The effect of substrate temperature (T_S) on the growth rate, chemical composition, structure, and properties of resulting a-SiOC:H films is reported. Film growth is an adsorption-controlled process, wherein two mechanisms can be distinguished with a transition at about T_S=70°C. Depending on the temperature, films of different nature can be obtained, from polymer-like to highly crosslinked material with C-Si-O network. The chemical structure of a-SiOC:H films was characterized by FTIR, ¹³C and ²⁹Si solid-state NMR, and X-ray photoelectron spectroscopes. The a-SiOC:H films were also characterized in terms of their density, refractive index, surface morphology, conformality of coverage, hardness, adhesion to a substrate, and friction coefficient. The films were found to be morphologically homogeneous materials exhibiting good conformality of coverage and small surface roughness. Their refractive index exhibits anomalous effect revealing a minimum value at T_S=125°C. Due to their exceptional physical properties a-SiOC:H films produced by RPCVD from DEMS precursor seems to be useful as potential dielectric materials or coatings for various encapsulation applications.     

Impact of the ΔPhe configuration on the Boc-Gly-ΔPhe-NHMe conformation: experiment and theory

Conformational propensities of N-t-butoxycarbonyl-glycine-(E/Z)-dehydrophenylalanine N′-methylamides (Boc-Gly-(E/Z)-ΔPhe-NHMe) in chloroform were investigated by NMR and IR techniques. The low-temperature crystal structure of the E isomer was determined by single crystal X-ray diffraction and the experimental data were elaborated by theoretical calculations using DFT (B3LYP, M06-2X) and MP2 approaches. The β-turn tendencies for both isomers were determined in the gas phase and in the presence of solvent. The obtained results reveal that the configuration of ΔPhe residue significantly affects the conformations of the studied dehydropeptides. The tendency to adopt β-turn conformations is significantly lower for the E isomer (Boc-Gly-(E)-ΔPhe-NHMe), both in gas phase and in chloroform solution.

     

Alkaline-Earth Metal Mediated Benzene-to-Biphenyl Coupling

Complex [(^DIPePBDI)Ca]₂(C₆H₆), with a C₆H₆²⁻ dianion bridging two Ca²⁺ ions, reacts with benzene to yield [(^DIPePBDI)Ca]₂(biphenyl) with a bridging biphenyl²⁻ dianion (^DIPePBDI=HC[C(Me)N-DIPeP]₂; DIPeP=2,6-CH(Et)₂-phenyl). The biphenyl complex was also prepared by reacting [(^DIPePBDI)Ca]₂(C₆H₆) with biphenyl or by reduction of [(^DIPePBDI)CaI]₂ with KC₈ in presence of biphenyl. Benzene-benzene coupling was also observed when the deep purple product of ball-milling [(^DIPPBDI)CaI(THF)]₂ with K/KI was extracted with benzene (DIPP=2,6-CH(Me)₂-phenyl) giving crystalline [(^DIPPBDI)Ca(THF)]₂(biphenyl) (52 % yield). Reduction of [(^DIPePBDI)SrI]₂ with KC₈ gave highly labile [(^DIPePBDI)Sr]₂(C₆H₆) as a black powder (61 % yield) which reacts rapidly and selectively with benzene to [(^DIPePBDI)Sr]₂(biphenyl). DFT calculations show that the most likely route for biphenyl formation is a pathway in which the C₆H₆²⁻ dianion attacks neutral benzene. This is facilitated by metal-benzene coordination.     

Hydroxylation of the silica in microfabricated thin layer chromatography plates as probed by time‐of‐flight secondary ion mass spectrometry and diffuse reflectance infrared Fourier transform spectroscopy

Microfabricated silica thin layer chromatography (TLC) plates have previously been prepared on patterned carbon nanotube forests. The high temperatures used in their fabrication reduce the number of hydroxyl groups on their surfaces. Fortunately, silica can be rehydroxylated. In diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), a silanol peak below 3740 cm^?1 indicates a well‐hydroxylated silica surface that is fit for chromatography. Hydroxylations of our materials with HF are so effective that it is not possible to discern the position of this peak. In contrast, this signal is discernable when the plates are treated with NH₄OH. To find a more convenient method for studying the surfaces of TLC plates, time‐of‐flight secondary ion mass spectroscopy (ToF‐SIMS) was considered. ToF‐SIMS is advantageous because multiple microfabricated TLC plates must be scraped to obtain enough silica for one DRIFT analysis, while static SIMS can be performed on very small regions (500 × 500 µm² or less) of individual plates. Ratios of the SiOH⁺ and Si⁺ ToF‐SIMS signals for microfabricated TLC plates correlated well with ~3740 cm^?1 silanol peaks from DRIFT. Thus, SIMS allows direct analysis of all of our treated and untreated plates, including those hydroxylated with HF. The best hydroxylation condition for HF, which was better than any studied for NH₄OH, was around 150 ppm at room temperature. The best hydroxylation condition for NH₄OH was 50 °C for 72 h. ToF‐SIMS versus DRIFT results of commercial TLC plates were also obtained and evaluated. Copyright © 2014 John Wiley & Sons, Ltd.     

Composition of oxygen precipitates in Czochralski silicon wafers investigated by STEM with EDX/EELS and FTIR spectroscopy

In this work, we investigated the stoichiometry of oxygen precipitates in Czochralski silicon wafers. The thickness dependence of the Cliff–Lorimer sensitivity factor for the silicon/oxygen system was determined and applied for the investigation of the stoichiometry of oxygen precipitates by EDX. The results show that both plate‐like oxygen precipitates and a transitional form between plate‐like and octahedral precipi‐ tates consist of SiO₂. This was confirmed by EELS low loss spectra where the typical spectrum for amorphous SiO₂ was observed. Moreover, the absorption band of plate‐like precipitates at 1227 cm^–1 was found in the low temperature FTIR spectrum. It was demonstrated that this band can only be simulated by the dielectric constants of amorphous SiO₂. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Thermal response of a periodic boundary layer near an axisymmetric stagnation point on a circular cylinder

Boundary layer solutions are provided to study the time-mean heat transfer characteristics in a laminar flow in the vicinity of an axisymmetric stagnation point. The velocity of the oncoming flow is assumed to oscillate relative to the body. Different solutions are constructed for the small and high values of the reduced frequency parameter. Numerical solutions for the temperature functions are presented, and the wall values of the thermal gradients are tabulated.     

Photoinduced Mo−CN Bond Breakage in Octacyanomolybdate Leading to Spin Triplet Trapping

The photoinduced properties of the octacoordinated complex K₄Mo^IV(CN)₈⋅2 H₂O were studied by theoretical calculations, crystallography, and optical and magnetic measurements. The crystal structure recorded at 10 K after blue light irradiation reveals an heptacoordinated Mo(CN)₇ species originating from the light-induced cleavage of one Mo−CN bond, concomitant with the photoinduced formation of a paramagnetic signal. When this complex is heated to 70 K, it returns to its original diamagnetic ground state, demonstrating full reversibility. The photomagnetic properties show a partial conversion into a triplet state possessing significant magnetic anisotropy, which is in agreement with theoretical studies. Inspired by these results, we isolated the new compound [K(crypt-222)]₃[Mo^IV(CN)₇]⋅3 CH₃CN using a photochemical pathway, confirming that photodissociation leads to a stable heptacyanomolybdate(IV) species in solution.