偏硅酸钙中Pr3+的4f5d态的光谱特性及Pr3+→Gd3+的能量传递

合成了高效发射UV光的CaSiO3:Pr^3 新型荧光体，研究了室温下Pr^3 的4f5d态的发射和激发光谱，Pr^3 的4f5d态的最低子能级向4f^2组态的^3H4，^3H6和^1G4能级跃迁产生UV发射，并不伴随有4f-4f能级跃迁的可见光发射。Pr^3 的浓度猝灭是由于辐射和无辐射能量传递造成的，同时，在CaSiO3中，存在Pr^3 →Cd^3 的能量传递，探讨了其能量传递特性。     

Assigning patients to nurses in neonatal intensive care

An intensive care nursery provides health care for critically ill newborn infants. During a typical shift, infants range from those needing only occasional care to those requiring constant attention. At the beginning of each shift, the head nurse groups the patients for assignment to staff nurses. Typically each nurse cares for one group of infants throughout the shift. The large variation in infant conditions along with several complicating side constraints makes it difficult to develop balanced nurse work loads. We develop a mathematical programming approach for achieving better workload balance. We first develop a detailed neonatal acuity system that quantifies the nursing workload of each patient. We then develop an integer linear program that assigns patients to nurses while balancing nurse workloads. Because this model is computationally intractable, we develop a heuristic that exploits the fact that most nurseries are divided into a number of physical zones. We use ten case studies taken from a major university hospital to benchmark the performance of this heuristic. We also perform a designed experiment using randomly generated problems that examines the effect of nursery parameters on heuristic performance.     

Fleet configuration subject to stochastic demand: an application in the distribution of liquefied petroleum gas

We study the problem of configuring a fleet, in which vehicles receive information on-line about the demand that they should fulfil while they are on the road. In each district it must be decided the number of vehicles and their capacity. The objective function is to minimise the operational cost subject to constraints for the minimum delivery capacity, the maximum vehicle size and the average waiting time for customers. The last constraint is modelled as a queuing system that is adjusted according to the simulation of the delivery process of a Chilean company that distributes liquefied petroleum gas in portable cylinders. We provide the analytical form of all the components of the model, so it can be solved using a standard non-linear programming package. We show that the fleet may increase its sales by 3% and reduce the waiting time of customers 10% by allowing a set of vehicles to share the buffer of orders rather than having vehicles to exclusively serve smaller sectors.     

Pt(110)表面自吸附原子能量和力的改进分析型嵌入原子法分析

采用改进分析型嵌入原子法计算了Pt(110)表面自吸附原子的能量和法向力.当Pt吸附原子位于Pt(110)表面第一层原子的二重对称洞位上0.11nm时最稳定.Pt吸附原子的最佳迁移路径是由一个二重对称洞位沿密排方向迁移到最近邻的另一个二重对称洞位.在吸附原子远离表面的过程中，将依次经过排斥、过渡和吸引等三个区域.在排斥区和过渡区，由于吸附原子与表面原子间强的相互作用势，吸附原子的能量和法向力的形貌图均为(110)面原子排列的复形，与对势理论和嵌入原子法得到的结果一致.在吸引区，由于多体相互作用及晶体中原子 关键词： 金属表面 自吸附 能量 力     

光锥与TDI-CCD耦合监控中测试目标的一种实现方法

为了给光锥与时间延迟积分电荷耦合器件耦合监控装置提供有效的被测运动条纹，分析了传统推扫成像实验装置的不足之处，设计了电子显示目标滚屏运动装置.采用光学相机对印刷条纹静止成像，并用TDI-CCD数字相机对监视器屏幕上的运动条纹动态成像.实验结果表明，该方案解决了高分辨率的鉴别率图样无法在监视器或投影仪上精确显示的困难.与传统的实验室模拟装置相比，该方案提高了鉴别率条纹的运动稳定性，减小了条纹运动速率与TDI-CCD扫描行频间的失配误差，不仅能够对耦合过程实施监控，而且还能用于耦合系统的像质评价.     

DESIGN OF A NOVEL 2-D UNIPLANAR CRLH-TL STRUCTURE

A novel uniplanar 2-D composite right/left-handed transmission line (CRLH-TL) structure is proposed based on a general transmission line theory and the way to increase the relative operating bandwidth in the left-handed (LH) region and lower the LH operating frequency is illustrated. In addition, a new method to extract parameters and calculate the Bloch impedance of the structure is presented. Numerical results of the dispersion as well as the extracted parameters are given, which are calculated based on full-wave simulation. The present 2-D uniplanar CRLH-TL structure is applicable to 2-D left-handed materials in lower and wider LH frequency range. Supported by the National Natural Science Foundation of China (No. 60371010) (No. 60471037) (No. 63531020)     

相对论效应对激光在等离子体中的共振吸收的影响

采用一维粒子模拟(PIC)方法，研究了相对论效应对P偏振激光斜入射非均匀等离子体时产生的共振吸收的影响. 计算表明，弱相对论情况下，在临界面附近产生的电子等离子体波的相对论非线性效应占主要作用；随着入射光场的逐渐增大，吸收率逐渐降低. 当入射光强超过3.7×10¹⁷W/cm²时，由于超短激光脉冲本身在等离子体中产生相对论效应、等离子体波破裂效应，以及参量不稳定过程激发等，吸收系数随着激光强度又开始增加. 固定等离子体密度标长，取不同的激光入射角、电子初始温度，相对论效应对吸收系数的影响是一致的. 关键词： 激光等离子体 相对论效应 共振吸收 粒子模拟     

Mn位W掺杂对La0.3Ca0.7MnO3体系磁结构的影响

通过对La0.3Ca0.7Mn1-xWxO3(x=0.00,0.04,0.08,0.12,0.15)多晶样品M-T曲线、M-H曲线及ESR谱的测量,研究了Mn位W掺杂对电荷有序体系La0.3Ca0.7MnO3磁结构的影响.结果表明,当掺杂量为0.00≤x≤0.08时,体系存在电荷有序(CO)相,AFM/CO态共存于相变温度以下,电荷有序温度TCO随着W掺杂量的增加而增加;x=0.04时,样品在低温下为FM相与AFM/CO相共存,在CO相建立前、后均有FM从PM中分离出来;当x≥0.12时,CO态融化,在极低温度下存在顺磁-铁磁(PM-FM)相变.     

具有高机械强度的掺Er~(3 )∶TeO_2-Nb_2O_5玻璃的光谱性质研究

熔制了掺铒碲铌玻璃样品(100-X)TeO2-XNb2O5(X=5,10,15,20mol%),测试了其密度、折射率、转变温度、析晶温度、维氏机械强度、吸收光谱、荧光光谱、荧光寿命等参量。利用Judd-Ofelt和McCumber理论分别计算了铒离子强度参量Ωt(t=2,4,6)和受激发射截面σemi的大小,研究了掺铒碲铌玻璃样品光谱参量对Nb2O5成分的依赖性,并与典型的碲锌钠玻璃(75TeO2-20ZnO-5Na2O)在热学、机械强度、光谱性质和放大品行四个方面进行了比较.     

新型三段高性能的长波段掺铒光纤超荧光光源的研究

提出了一种第一段无泵浦、第二段前向泵浦和第三段后向泵浦的三段级联掺铒光纤超荧光光纤光源的新结构.数值分析了泵浦光波长、铒光纤长度以及泵浦比例对新结构性能的影响.结果表明可以找到一组适合制作成本低廉、输出功率高、谱平坦的长波段掺铒光纤超荧光光源.