Hybrid Particle–Continuum Simulations of Polymer Brushes in Shear Flow

A hybrid particle–continuum method is used to study the shear flow confined between two opposing walls, one of which is coated with polymer chains. Molecular dynamics (MD) is used in the particle region near the brush and Navier–Stokes (NS) equations are applied in the remaining region where the continuum assumption holds. The information exchange from the continuum region to the particle region is implemented using the constrained particle dynamics. Both Couette shear flow and oscillatory flow are considered in the present work. The effect of the shear flow on the conformational characteristics of polymer brushes is analyzed. In the overlap region, the velocities obtained from MD simulations are smoothly connected with those from NS equations. Our investigations demonstrate that the hybrid particle–continuum model is valid in exploring the shear behavior of polymer brushes.     

Switched-model-based compound control of hypersonic vehicles with input nonlinearities

Nonlinear Dynamics - Focusing on the large-envelope control problem of air-breathing hypersonic vehicles (AHVs), this paper employs a switched control-oriented model (SCOM) to describe vehicle...     

碳离子在不同材料叶片的多叶光栅上产生的次级粒子研究

在碳离子放射治疗中，碳离子束与治疗头设备和患者身体相互作用产生的次级粒子可以到达患者体内的许多区域，在产生的次级粒子中以中子和$\gamma $射线的产额为最大。在不影响束流配送功能的情况下，减少碳离子放疗中产生的次级中子和$\gamma $射线对于降低放疗后出现的正常组织并发症及二次肿瘤风险有着非常重要的意义。本文利用蒙特卡罗(Monte Carlo)方法模拟计算了被动式束流配送系统下，400 MeV/u碳离子束照射到由不同材料叶片构成的多叶光栅(MLC)形成典型的10 cm×10 cm方形射野时，在水模体中产生的次级中子和$\gamma $射线所沉积的剂量及空间分布等。模拟结果显示:碳离子束通过MLC形成射野后在水模体中产生的次级中子主要分布在水模体的入射端，次级$\gamma $射线较为均匀的分布在整个水模体内，且较多分布在具有展宽Bragg峰(SOBP)射野在水模体中贯穿时的坪区。对于MLC叶片材料的选择，则需根据实际情况对叶片厚度以及次级粒子当量剂量的要求来确定。本文通过模拟研究不同MLC叶片材料产生次级粒子的情况，为被动式束流配送系统中MLC叶片及其他元件的材料选择提供了科学依据。     

Assembly of ϵ-Keggin Polyoxometalate from Molecular Crystal to Zeolitic Octahedral Metal Oxide

Zeolitic octahedral metal oxides are inorganic crystalline microporous materials with adsorption and redox properties. New ϵ-Keggin nickel molybdate–based zeolitic octahedral metal oxides have been synthesized. ³¹P NMR spectroscopy shows that reduction of Mo^VI-based molybdates forms an ϵ-Keggin polyoxometalate that immediately transfers to the solid phase. Investigation of the formation process indicates that a low Ni concentration, insoluble reducing agent, and long synthesis time are the critical factors for obtaining the zeolite octahedral metal oxides rather than the ϵ-Keggin polyoxometalate molecule. The synthesized zeolitic nickel molybdate with Na⁺ is used as the adsorbent, which effectively separates C₂ hydrocarbon mixtures.     

Screening potential antagonists of epidermal growth factor receptor from Marsdenia tenacissima via cell membrane chromatography model assisted by HPLC–ESI–IT–TOF–MS

Marsdenia tenacissima, or Tongguanteng in Chinese, is a traditional Chinese herb and has a broad application in clinical practice for its pharmacological effects of treating asthma, pneumonia, tonsillitis, pharyngitis tumors, etc. However, few studies have reported the screening of the active components of this medicine for tumor therapy. In this work, a two‐dimensional analytical system was developed to screen antagonists of epidermal growth factor receptor (EGFR) from M. tenacissima. A fraction was retained on the EGFR cell membrane chromatography (CMC) column, separated and identified as tenacissoside G (TG), tenacissoside H (TH) and tenacissoside I (TI) by two‐dimensional HPLC–IT–TOF–MS. Molecular docking and 3‐(4,5‐dimethyl‐2‐thiazolyl)‐2,5‐diphenyl‐2‐H‐tetrazolium bromide (MTT) assay were carried out to assess the activity of TS (including TG, TH and TI). Molecular docking results showed that the binding mode of TS on EGFR is similar to that of gefitinib. The MTT assay demonstrated that gefitinib and TS (especially TI) could inhibit the growth of EGFR highly expressed cell lines in a dose‐dependent manner in the range of 5–50 μmol/L. In conclusion, the two‐dimensional EGFR/CMC–HPLC–IT–TOF–MS system could be a useful approach in drug discovery from traditional Chinese medicines for searching for potential antitumor candidates.     

Adaptive controller design for a switched model of air-breathing hypersonic vehicles

Since most of the control strategies for air-breathing hypersonic vehicles (AHVs) concentrate on the control-oriented models built at/around a specific working point, it is somewhat hard to extend them to the broader flight envelop. Aiming at the above deficiency, this paper formulates the dynamics of AHVs as several sub-models, which switch to each other in accordance with the flight condition and make up of the control-oriented switched model (COSM). With the aid of the COSM, two adaptive tracking controllers are proposed for the purposes of velocity tracking and altitude tracking, sequentially. By utilizing neural networks and designing robust control laws, the possible changes on the force and moment coefficients in the COSM are successfully handled. The time-varying inertia parameters of AHVs are also considered at design level. It is worth emphasizing that while this strategy is developed based on a switched model, the resulting control algorithm is continuous with no connection to the switching signal. Analysis indicates that both velocity and altitude tracking errors remain small within the whole flight envelop, which is further confirmed by a simulation study.     

Water‐Soluble Luminescent Hybrid Composites Consisting of Oligosilsesquioxanes and Lanthanide Complexes and their Sensing Ability for Cu2+

Water‐soluble hybrid composites with great potential for selective and sensitive sensing and that are obtained through simple, rapid, and environmentally friendly methods are highly desirable and remain a challenging task. Herein, we present luminescent hybrid composites that were realized by linking Na₃[Ln(dpa)₃] (dpa=2,6‐pyridinedicarboxylic acid) to octa‐amino functionalized polyhedral oligomeric silsesquioxane (POSS‐NH₂) through hydrogen‐bonding interactions between the oxygen atoms of the carboxylate groups of dpa and the hydrogen‐bond‐donor amino groups. The resulting hybrid composites Ln(dpa)₃@POSS‐NH₂ are highly soluble in aqueous solutions and the quantum yield of Eu(dpa)₃@POSS‐NH₂ is as high as 56.5 % or 46.3 % in the solid state and in aqueous solution, respectively, as determined by using the integrating sphere method. The novel water‐soluble luminescent hybrid composites exhibit high thermal and photostability, and the emitted colors of the resulting hybrid composite can be finely tuned by changing the Eu³⁺/Tb³⁺ ratio. Interestingly, Eu(dpa)₃@POSS‐NH₂ hybrid composites exhibited an effective switch‐off fluorescence response to Cu²⁺ over other common metal ions in aqueous media.     

Hydrolysis kinetics of silane coupling agents studied by near-infrared spectroscopy plus partial least squares model

Abstract

A method of Fourier transform near-infrared (FT-NIR) spectroscopy combined with partial least squares (PLS) model was successfully applied to investigate the hydrolysis kinetics of four kinds of silane coupling agents (phenyltriethoxysilane, vinyltriethoxysilane, 3-mercaptopropyltriethoxysilane, 3-chloropropyltriethoxysilane) in an acid-catalyzed EtOH system. The fast scanning speed and high sensitivity of the FT-NIR spectroscopy, and the powerful data processing ability of the PLS, enabled the method to quantitatively and accurately catch the fast changing H₂O concentration during the hydrolysis processes without delay, realizing the study of the fast-paced hydrolysis reactions of the silane coupling agents. The results showed that electrophilic substitution occurred in the hydrolysis reactions, which followed second-order reactions and greatly depend on the catalyst concentration and reaction temperature. The hydrolysis rate constants, activation energy, and Arrhenius Frequency factors were gained. In conclusion, the FT-NIR PLS model is a powerful tool for hydrolysis kinetics researching of the silane coupling agents.     

山核桃蒲壳中单宁的提取、检测及其缓蚀性能研究

用响应面法优化山核桃蒲壳中单宁的提取工艺,对单宁类型进行鉴定,还对单宁在HCl溶液中对冷轧钢的缓蚀作用进行探索。通过定性实验,证实山核桃蒲壳中含有缩合类单宁。运用Box-Behnken中心组合实验和响应面法考察了乙醇体积分数、提取时间、提取温度3个因素对单宁提取率的影响,优化提取条件为:乙醇体积分数65%,提取时间61 min,提取温度52℃。在此条件下,单宁提取率为6.73%。失重缓蚀实验结果表明,在酸洗时间为2～12h、酸洗温度20～50℃、HCl浓度0.2～1.0mol/L条件下,单宁提取液有一定的缓蚀作用,但缓蚀率不高。若通过与乌洛托品复配,缓蚀率均可提高到97%以上。