Synthesis and biological evaluation of rigid polycyclic derivatives of the Diels-Alder adduct tricyclo[6.2.1.02,7]undeca-4,9-dien-3,6-dione

Part of our research program concentrates on the discovery of new bioactive compounds prepared either by total synthesis or molecular transformation of compounds with bioactivity profiles. In this work we have focused our interest on chemical transformations of the Diels-Alder adduct tricyclo[6.2.1.0(2,7)]undeca-4,9-dien-3,6-dione in order to obtain cage-like compounds and derivatives, followed by an evaluation of their biological activity.     

High-performance liquid chromatographic separation of rolipram, bupivacaine and omeprazole using a tartardiamide-based stationary phase influence of flow rate and temperature on the enantioseparation

Chromatographic separation of the chiral drugs rolipram, bupivacaine and omeprazole on a tartardiamide-based stationary phase commercially named Kromasil CHI-TBB is shown in this work. The effect of temperature on the chromatographic separation of the chiral drugs using the Kromasil CHI-TBB stationary phase was determined quantitatively so as to contribute toward the design for the racemic mixtures of the named compound by using chiral columns. A decrease in the retention and selectivity factors was observed, when the column temperature increased. Van't Hoff plots provided the thermodynamic data. The variation of the thermodynamic parameters enthalpy and entropy are clearly negative meaning that the separation is enthalpy controlled.     

Synthesis and micellar properties of surface-active ionic liquids: 1-alkyl-3-methylimidazolium chlorides

A series of surface-active ionic liquids, RMeImCl, has been synthesized by the reaction of purified 1-methylimidazole and 1-chloroalkanes, RCl, R=C(10),C(12),C(14), and C(16), respectively. Adsorption and aggregation of these surfactants in water have been studied by surface tension measurement. Additionally, solution conductivity, electromotive force, fluorescence quenching of micelle-solubilized pyrene, and static light scattering have been employed to investigate micelle formation. The following changes resulted from an increase in the length of R: an increase of micelle aggregation number; a decrease of: minimum area/surfactant molecule at solution/air interface; critical micelle concentration, and degree of counter-ion dissociation. Theoretically-calculated aggregation numbers and those based on quenching of pyrene are in good agreement. Gibbs free energies of adsorption at solution/air interface, DeltaG(ads)(0), and micelle formation in water, DeltaG(mic)(0), were calculated, and compared to those of three surfactant series, alkylpyridinium chlorides, RPyCl, alkylbenzyldimethylammonium chlorides, RBzMe(2)Cl, and benzyl(3-acylaminoethyl)dimethylammonium chlorides, R(')AEtBzMe(2)Cl, respectively. Contributions to the above-mentioned Gibbs free energies from surfactant methylene groups (in the hydrophobic tail) and the head-group were calculated. For RMeImCl, the former energy is similar to that of other cationic surfactants. The corresponding free energy contribution of the head-group to DeltaG(mic)(0) showed the following order: RPyCl approximately RBzMe(2)Cl>RMeImCl>R(')AEtBzMe(2)Cl. The head-groups of the first two surfactant series are more hydrophobic than the imidazolium ring of RMeImCl, this should favor their aggregation. Micellization of RMeImCl, however, is driven by a relatively strong hydrogen-bonding between the chloride ion and the hydrogens in the imidazolium ring, in particular the relatively acidic H2. This interaction more than compensates for the relative hydrophilic character of the diazolium ring. As indicated by the corresponding DeltaG(mic)(0), micellization of R(')AEtBzMe(2)Cl is more favorable than that of RMeImCl because the CONH group of the former surfactant series forms hydrogen bonds to both the counter-ion and the neighboring molecules in the micelle.     

Copper acetylacetonate anchored onto amine-functionalised clays

Copper (II) acetylacetonate was immobilised directly onto two clays, laponite (Lap) and K10-montmorillonite (K10), and after their amine functionalisation with (3-aminopropyl)triethoxysilane (APTES). All the materials were characterised by nitrogen adsorption isotherms at -196 degrees C, elemental analysis, TG-DSC, XRD, and IR spectroscopy. The K10-based materials were also characterised by XPS. The APTES-functionalised K10 showed higher copper loading than K10, indicating that the clay functionalisation enhanced the complex immobilisation; on the contrary, in Lap-based materials higher metal content was obtained by direct complex anchoring, probably due to the delaminated nature of Lap which induced the particles aggregation on functionalisation with APTES. All the results pointed out that the Cu complex was anchored onto the amine-functionalised clays by Schiff condensation between the amine groups of anchored APTES and the carbonyl groups of the acetylacetonate ligand, whereas direct immobilisation proceeded mostly through interaction between the metal centre and the clay surface hydroxyl groups.     

Clerodane Diterpenoids from an Edible Plant Justicia insularis: Discovery,Cytotoxicity, and Apoptosis Induction in Human Ovarian Cancer Cells

Objectives: The toxicity of chemotherapeutic anticancer drugs is a serious issue in clinics. Drug discovery from edible and medicinal plants represents a promising approach towards finding safer anticancer therapeutics. Justicia insularis T. Anderson (Acanthaceae) is an edible and medicinal plant in Nigeria. This study aims to discover cytotoxic compounds from this rarely explored J. insularis and investigate their underlying mechanism of action. Methods: The cytotoxicity of the plant extract was evaluated in human ovarian cancer cell lines and normal human ovarian surface epithelia (HOE) cells using a sulforhodamine B assay. Bioassay-guided isolation was carried out using column chromatography including HPLC, and the isolated natural products were characterized using GC-MS, LC-HRMS, and 1D/2D NMR techniques. Induction of apoptosis was evaluated using Caspase 3/7, 8, and 9, and Annexin V and PI based flow cytometry assays. SwissADME and SwissTargetPrediction web tools were used to predict the molecular properties and possible protein targets of identified active compounds. Key finding: The two cytotoxic compounds were identified as clerodane diterpenoids: 16(α/β)-hydroxy-cleroda-3,13(14)Z-dien-15,16-olide (1) and 16-oxo-cleroda-3,13(14)E-dien-15-oic acid (2) from the Acanthaceous plant for the first time. Compound 1 was a very abundant compound (0.7% per dry weight of plant material) and was shown to be more potent than compound 2 with IC₅₀ values in the micromolar range against OVCAR-4 and OVCAR-8 cancer cells. Compounds 1 and 2 were less cytotoxic to HOE cell line. Both compounds induced apoptosis by increasing caspase 3/7 activities in a concentration dependent manner. Compound 1 further increased caspase 8 and 9 activities and apoptosis cell populations. Compounds 1 and 2 are both drug like, and compound 1 may target various proteins including a kinase. Conclusions: Clerodane diterpenoids (1 and 2) in J. insularis were identified as cytotoxic to ovarian cancer cells via the induction of apoptosis, providing an abundant and valuable source of hit compounds for the treatment of ovarian cancer.     

Dynamics of the anisotropic two-dimensional XY model

In this paper we study the dynamics of the two-dimensional XY model with single-ion anisotropy, and spin S = 1, in the large D phase, and low temperatures, using the bond operator formalism. The in-plane structure factor is a delta function. The out of plane shows a three peak structure, which merges in a single peak at the Brillouin zone boundary. We analyze also spin currents generated by a magnetic field gradient. The spin conductivity is calculated, at finite temperature, using the Kubo formula. The model shows unconventional ballistic spin transport at finite temperature. The computed spin conductivity exhibits a nonzero Drude weight at finite temperature. For ω< 2m, where m is the energy gap, the spin conductivity is described solely by the Drude weight. There is a regular contribution to the spin conductivity for ω> 2m, which persist in the zero temperature limit. The conductivity at the critical point, and for small frequencies, is (gμ_B)²/ħ times a universal scaling function of ħω/k_B T.     

Determination of organic and inorganic mercury species in water and sediment samples by HPLC on-line coupled with ICP-MS

This paper describes a preconcentration method for Hg²⁺ and MeHg⁺ in water samples using sodium diethyldithiocarbamate immobilized in polyurethane foam (PU-NaDDC) and an extraction method for several mercury species in sediment samples, including MeHg⁺, EtHg⁺ and PhHg⁺, which is simple, rapid, and uses a single organic solvent. Separation and measurement were done by high-performance liquid chromatography on-line with inductively coupled plasma mass spectrometry (HPLC/ICP-MS). Initially, the test of recovery was applied using procedures compatible with HPLC. Under the optimum extraction conditions, recoveries of 96.7, 96.3 and 97.3% were obtained for MeHg⁺, EtHg⁺, and PhHg⁺, respectively, from n = 4 spiked sediment samples. This study also demonstrates that the combination of solid-phase extraction on PU-NaDDC with HPLC separation and ICP-MS detection is an effective preconcentration procedure for simultaneous measurement of Hg²⁺ and MeHg⁺ at ultra-trace levels in water samples. The application of the proposed procedure to the determination of mercury species in drinking water sample was investigated. The proposed method clearly gave satisfactory average recoveries between 93.7 and 101.5%.     

Thermal characterization of hydrotalcite used in the transesterification of soybean oil

Hydrotalcite was synthesised by co-precipitation method, calcined and characterized by XRD, BET, IR and TG/DTA/DTG analyses and tested as solid base catalyst in the transesterification of soybean oil with methanol, achieving a methyl ester content of 99.5%. The thermal decomposition of hydrotalcite calcined occurred in four mass loss steps at 28, 105, 203 and 400 °C. The hydrotalcite was recovered and through a simple evaluation by TG/DTA/DTG techniques it was found that at 500 °C is the temperature, where the organic matter should be eliminated from the catalyst. This study shows the importance of thermal analysis in the evaluation of the recovery temperature of hydrotalcite.     

Carbenoid chain reactions: substitutions by organolithium compounds at unactivated 1-chloro-1-alkenes

The deceptively simple "cross-coupling" reactions Alk(2)C=CA-Cl + RLi --> Alk(2)C=CA-R + LiCl (A = H, D, or Cl) occur via an alkylidenecarbenoid chain mechanism in three steps without a transition metal catalyst. In the initiating step 1, the sterically shielded 2-(chloromethylidene)-1,1,3,3-tetramethylindans 2a-c (Alk(2)C=CA-Cl) generate a Cl,Li-alkylidenecarbenoid (Alk(2)C=CLi-Cl, 6) through the transfer of atom A to RLi (methyllithium, n-butyllithium, or aryllithium). The chain cycle consists of the following two steps: (i) A fast vinylic substitution reaction of these RLi at carbenoid 6 (step 2) with formation of the chain carrier Alk(2)C=CLi-R (8), and (ii) a rate-limiting transfer of atom A (step 3) from reagent 2 to the chain carrier 8 with formation of the product Alk(2)C=CA-R (4) and with regeneration of carbenoid 6. This chain propagation step 3 was sufficiently slow to allow steady-state concentrations of Alk(2)C=CLi-Aryl to be observed (by NMR) with RLi = C6H5Li (in Et2O) and with 4-(Me3Si)C6H4Li (in t-BuOMe), whereas these chain processes were much faster in THF solution. PhC[triple bond]CLi cannot perform step 1, but its carbenoid chain processes with reagents 2a and 2c may be started with MeLi, whereafter LiC[triple bond]CPh reacts faster than MeLi in the product-determining step 2 to generate the chain carrier Alk(2)C=CLi-C[triple bond]CPh (8g), which completes its chain cycle through the slower step 3. The sterically congested products were formed with surprising ease even with RLi as bulky as 2,6-dimethylphenyllithium and 2,4,6-tri-tert-butylphenyllithium.     

Er, Yb Doped Yttrium Based Nanosized Phosphors: Particle Size, “Host Lattice” and Doping Ion Concentration Effects on Upconversion Efficiency

The upconverter phosphors studied herein have different percentages of Er³⁺ and Yb³⁺ as doping ions in different Y³⁺ matrixes (Y₂O₃, Y₂O₂S), and were prepared from different precursors (polymeric resin, oxalate, basic carbonate) and method (combustion). Upconversion emission spectra were recorded at 298 K for all the doped samples in the visible region, for efficiency and Green/Red emission relative intensity comparisons. Therefore, an investigation of the influence of the doping ion concentration, particle size and host lattice on the upconversion process is provided in view of the UPT (Upconverting phosphor technology application). On the basis of the results, it was possible to evaluate the best combination for a specific assay, considering whether it is advantageous to have the greatest contribution from the green or red emissions, or from both in comparable intensities.