Divinylsiloxane‐bisbenzocyclobutene‐based polymer modified with polystyrene–polybutadiene–polystyrene triblock copolymers

Divinylsiloxane‐bisbenzocyclobutene (DVS‐bisBCB) polymer has very low dielectric constant and dissipation factor, good thermal stability, and high chemical resistance. The fracture toughness of the thermoset polymer is moderate due to its high crosslink density. A thermoplastic elastomer, polystyrene–polybutadiene–polystyrene triblock copolymer, was incorporated into the matrix to enhance its toughness. The cured thermoset matrix showed different morphology when the elastomer was added to the B‐staged prepolymer or when the elastomer was B‐staged with the DVS‐bisBCB monomer. Small and uniformly distributed elastomer domains were detected by transmission electron micrographs (TEM) in the former case, but TEM did not detect a separate domain in the latter case. A high percentage of the polystyrene–polybutadiene–polystyrene triblock copolymer could be incorporated into the DVS‐bisBCB thermoset matrix by B‐staging the triblock copolymer with the BCB monomer. The elastomer increased the fracture toughness of DVS‐bisBCB polymer as indicated by enhanced elongation at break and increased K1c values obtained by the modified edge‐lift‐off test. Elastomer modified DVS‐bisBCB maintained excellent electrical properties, high T_g and good thermal stability, but showed higher coefficient of linear thermal expansion values. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1591–1599, 2006     

Principle of event symmetry

To accommodate topology change, the symmetry of space-time must be extended from the diffeomorphism group of a manifold to the symmetric group acting on the discrete set of space-time events. This is the principle ofevent-symmetric space-time. I investigate a number of physical toy models with this symmetry to gain some insight into the likely nature of event-symmetric space-time. In the more advanced models the symmetric group is embedded into larger structures such as matrix groups which provide scope to unify space-time symmetry with the internal gauge symmetries of particle physics. I also suggest that the symmetric group of space-time could be related to the symmetric group acting to exchange identical particles, implying a unification of space-time and matter. I end with a definition of a new type of loop symmetry which is important in event-symmetric superstring theory.     

A confidence interval for the slope of a truncated regression

Summary Bhattacharya, Chernoff and Yang (1983) proposed a nonparametric estimate for the slope of a regression lineY = _o X + V subjected to the truncationYy ₀. The estimate corresponds to the zero-crossing of a random functionS _n (). In this paper an estimate for the asymptotic variance of the estimate of the slope is proposed and the rate of convergence is given. The proofs rest heavily on the local behavior ofS _n () in the neighborhood of the true value _o.     

IR and raman spectra of two layered aluminium phosphates Co(en)3Al3P4O16.3H2O and

The FT IR and FT Raman spectra of Co(en)3Al3P4O16.3H2O (compound I) and [NH4]3[Co(NH3)6]3[Al2 (PO4)4]2.2H2O (compound II) are recorded and analysed based on the vibrations of Co(en)(3)3+, Co(NH3)(6)3+, NH4, Al-O-P, PO3, PO2 and H2O. The observed splitting of bands indicate that the site symmetry and correlation field effects are appreciable in both the compounds. In compound I, the overtone of CH2 deformation Fermi resonates with its symmetric stretching vibration. The NH4 ion in compound II is not free to rotate in the crystalline lattice. Hydrogen bonding of different groups is also discussed.     

Synthesis and X-ray crystal structures of six [TeL4][MF6] salts, where L is ethylene- or trimethylene-thiourea, and M is Si, Ge or Sn. Five Te(II) complexes with a novel type of structure linked together by unusual N–HF hydrogen bonds

The complexes [Te(etu)₄][SiF₆] (1), [Te(etu)₄][SiF₆] · H₂O (2), [Te(trtu)₄][SiF₆] (3), [Te(etu)₄][GeF₆] · H₂O (4), [Te(trtu)₄][GeF₆] (5) and [Te(etu)₄][SnF₆] (6) (etu = ethylenethiourea, trtu = trimethylenethiourea) have been prepared and their crystal structures determined by X-ray crystallographic methods. The crystals of 1, 3 and 5 are tetragonal; space groups P4cc (No. 103) with Z = 4 for 1, P4nc (No. 104) with Z = 2 for 3, and I4 (No. 79) with Z = 2 for 5. The crystals of 2, 4 and 6 are orthorhombic, space group Pccn (No. 56) with Z = 8 for 2 and 4 and Z = 4 for 6; those of 2 and 4 being isomorphous. The cations contain square planar or slightly distorted square planar TeS₄ coordination groups. In 1, 3 and 5 the Te atoms are located on fourfold rotation axes; the cations have fourfold rotational symmetry and the four thiourea ligands extend to the same side of the TeS₄ plane. These are the first examples of [TeL₄]²⁺ conformers of this type. In 2 and 4 the Te atoms lie on general positions; the cations are distorted versions of those in 1, and also in these the four ligands extend to the same side of the TeS₄ plane. In 6 the Te atoms are located on twofold rotation axes, the conformation of the cations corresponds to the point group C₂ with two neighbouring ligands extending to one side of the coordination plane and the remaining two to the opposite side. In 1–5 each of the four ligands forms a N–HF bond to the same F atom in the counter ion. The crystals of 1–5 are red, and those of 6 are yellow. The red colour is attributed to interactions of Te and S lone electron pairs caused by ligand TeS₄/TeSC tilt angles markedly different from 90°.     

The lowest triplet state of benzene: Differences in electronic structure in two crystalline modifications of a cyclohexane host

Microwave induced delayed phosphorescence (MIDP) measurements have been performed in the 00 bands of the phosphorescence spectrum of benzene dissolved in two phases of cyclohexane. From the relative radiative rates for decay of the three zero-field levels it is concluded that on the average the symmetry of the electronic structure is lower than D_2h. In the monoclinic low temperature stable phase of cyclohexane (phase II) the structure is approximately antiquinoidal, and in the metastable phase III it is approximately quinoidal.     

Fractal analysis of hydroxyapatite from nitrogen isotherms

Samples of calcium hydroxyapatite, CaHap, were prepared via a wet method and subjected to thermal treatment in air in the temperature range 100-900 degrees C. Nitrogen adsorption-desorption isotherms were obtained on different samples, and their data points were used to analyze the fractal properties of the obtained solids. Both FHH and Neimark's equations were used for such purpose, and the agreement or disagreements between obtained results on using both equations are discussed. Considering the appropriate values of the obtained surface fractal dimensions D, it was concluded that an appreciable defractalization of the prepared hydroxyapatite is only noted upon calcinations at 900 degrees C. Below this temperature the loss in surface area and pore volume result from simultaneous bulk and surface mass transport, which conserve the initial surface roughness and average pore radius. Calcination at 900 degrees C caused sintering to proceed via bulk mass transport, with a consequent pore widening and a decrease in surface roughness.     

Multistep energy transfer in single molecular photonic wires

We demonstrate the synthesis and spectroscopic characterization of an unidirectional photonic wire based on four highly efficient fluorescence energy-transfer steps (FRET) between five spectrally different chromophores covalently attached to double-stranded DNA. The DNA-based modular conception enables the introduction of various chromophores at well-defined positions and arbitrary interchromophore distances. While ensemble fluorescence measurements show overall FRET efficiencies between 15 and 30%, single-molecule spectroscopy performed on four spectrally separated detectors easily uncovers subpopulations that exhibit overall FRET efficiencies of up to approximately 90% across a distance of 13.6 nm and a spectral range of approximately 200 nm. Fluorescence trajectories of individual photonic wires show five different fluorescence intensity patterns which can be ascribed to successive photobleaching events.     

Online extraction and determination of octylglucoside by reversed-phase high-performance liquid chromatography with evaporative light-scattering detection

A reversed-phase high-performance liquid chromatography method using evaporative light-scattering detection is developed for the determination of residual octylglucoside (OG) levels after a detergent exchange step for in-process samples of a vaccine antigen. The reversed-phase column not only provides separation of the OG but also functions as an extraction column to remove the vaccine antigen from the sample, thereby eliminating off-line sample manipulations. In addition to column selection, the mobile phase is optimized to enhance extraction and separation. The vaccine antigen is irreversibly bound to the column, allowing nonprotein components to interact with the column for separation and elution. The assay is linear over the range of 0.00050-0.050% OG. Precision tested at 0.0010% and 0.0050% OG is 2.9% and 7.2% relative standard deviation, respectively. The limits of quantitation and detection are determined to be 0.00050 and 0.000125% OG, respectively. Accuracy is determined to be 103 and 98%, based on spike recoveries of 0.0010% and 0.0050% OG, respectively.