The effect of a cystamine derivative, bis[2-(E-2-hexenoylamino)ethyl] disulfide, on rat platelet aggregation

Bis[2-(E-2-alkenoylamino)ethyl] disulfides (compds. I), synthesized from cystamine and 2-trans fatty acids, inhibited collagen-induced rat and rabbit platelet aggregation. The most potent compound was bis[2-(E-2-hexenoylamino)ethyl] disulfide (compd. I-1), and this compound suppressed thromboxane B2 formation from arachidonic acid in rat platelets. The results suggested that compd. I-1 has an inhibitory effect on cyclooxygenase.     

Radiation-induced solid-state polymerization of trioxane under high pressure

The in-source polymerization of trioxane in the solid state was investigated over a wide range of temperature and pressure, i.e., from 30 to 140°C and up to 7000 kg/cm², respectively. In the polymerization that was carried out slightly below the melting point under pressure, the higher the pressure, the higher the rate of polymerization. It was confirmed that the maximum rate of solid-state polymerization of trioxane occurs near the melting points, even under elevated pressure. The rate of polymerization decreased with increasing pressure at constant temperature. The shape of the time–conversion curves may be classified into two types, i.e., one which is typical of high pressure and low temperature, and the other which is typical of low pressure and high temperature. Changes in the shape of the conversion—intrinsic viscosity curves occurred coincidentally. Thus, three regions for the different “polymerization characteristic” were determined as functions of polymerization temperature and pressure. Explanations are given for the above-mentioned polymerization characteristic.     

Radiation-induced polymerization at high dose rate. II. α-Methylstyrene in bulk

Bulk polymerization of α-methylstyrene was carried out in a wide dose rate range, 7.6–256 rad/sec by γ rays and 8.5 × 10³–2.1 × 10⁵ rad/sec by electron beams. At high dose rate by electron beams, cationic polymerization took place along with formation of oligomeric product of DP _n = ～4. At low dose rate by γ rays, radical polymerization was found to occur in water-saturated monomer. The cationic polymerization at high dose rate proceeds with essentially the same mechanism as was already known in γ-ray polymerization of dry monomers. Relatively low reaction rate of the cationic polymerization compared with that of styrene is explained with the fact that the propagation of α-methylstyrene is much more easily inhibited by a slight amount of water.     

Solution viscosity behavior of polystyrene-based cationic ionomers. Effects of ion content and solvent

Dilute-solution viscosities of polystyrene-based cationic ionomers containing ammonio or phosphonio groups were measured in several solvents. In polar solvents with dielectric constant (ε_r) beyond 10, the ionomers showed a typical polyelectrolyte behavior, indicating that a large part of ionic groups were dissociated into ions. In nonpolar solvents with low ε_r, the reduced viscosity of the ionomers linearly decreased with a decreasing ionomer concentration. At low polymer concentrations, every ionomer gave a reduced viscosity lower than that of the corresponding chloromethylated polystyrene. With an increasing ion content, the intrinsic viscosity progressively decreased if the nonpolar solvents had a low acceptor number (A_N), such as toluene or tetrahydrofran (THF). In the halogenated solvents with high A_N value, such as chloroform, however, the intrinsic viscosity was hardly dependent on the ion content. This indicates that the intramolecular aggregation among the ionic groups is inhibited in the halogenated solvents due to a strong anion solvation. An addition of a protic solvent to a nonpolar solvent eliminates the aggregation between ionic groups and leads to polyelectrolyte behavior. © 1994 John Wiley & Sons, Inc.     

An effective method to use ionic liquids as reaction media for asymmetric reduction by Geotrichum candidum

An effective method was developed to use an enzyme in ionic liquids; the asymmetric reduction of ketones by Geotrichum candidum in ionic liquids proceeded smoothly with excellent enantioselectivity when the cell was immobilized on water-absorbing polymer containing water, while the reaction without the polymer did not proceed.     

Total synthesis of (-)-stevastelin B

The total synthesis and an unambiguous structure confirmation of stevastelin B 1, a novel 15-membered cyclic depsipeptide, are described; the fatty acid moiety in 1, prepared stereoselectively from L-quebrachitol was converted into the amino carboxylic acid, whose macrolactamization by Shioiri's procedure effectively constructed the cyclic structure of 1.     

Synthesis of di-Iron-Containing Inorganic Synzyme, γ-SiW10{Fe(OH2)}2O386?, and the Liquid-Phase Oxidation Catalysis

The Keggin-type di-iron-substituted silicotungstate, -SiW₁₀{Fe(OH₂)}₂O₃₈ ^6– (I), was synthesized by the reaction of the lacunary [-SiW₁₀O₃₆]^8– with Fe(NO₃)₃ in an acidic aqueous solution and isolated as the tetra-n-butylammonium salt (TBA-I). It was characterized by various analyses and the structure with the oxo-bridged di-iron site was clarified. TBA-I was stable and catalyzed selective oxidation of various alkanes and alkenes with hydrogen peroxide: cyclohexane, adamantane, n-hexane, and n-pentane were catalytically oxidized. Even lower alkanes such as methane, ethane, propane, and n-butane were catalytically oxidized. It was remarkable that the efficiency of hydrogen peroxide utilization to oxygenated products reached up to ca. 100% for the oxidation of cyclohexane and adamantane. Alkenes were mainly epoxidized with hydrogen peroxide. It was demonstrated that the TBA-I showed high turnover number of 135–147 for the oxidation of cyclohexane with 1 atm oxygen.     

Formation of ammonia in the reactions of a tungsten dinitrogen with ruthenium dihydrogen complexes under mild reaction conditions

Treatment of cis-[W(N2)2(PMe2Ph)4] (5) with an equilibrium mixture of trans-[RuCl(eta 2-H2)(dppp)2]X (3) with pKa = 4.4 and [RuCl(dppp)2]X (4) [X = PF6, BF4, or OTf; dppp = 1,3-bis(diphenylphosphino)propane] containing 10 equiv of the Ru atom based on tungsten in benzene-dichloroethane at 55 degrees C for 24 h under 1 atm of H2 gave NH3 in 45-55% total yields based on tungsten, together with the formation of trans-[RuHCl(dppp)2] (6). Free NH3 in 9-16% yields was observed in the reaction mixture, and further NH3 in 36-45% yields was released after base distillation. Detailed studies on the reaction of 5 with numerous Ru(eta 2-H2) complexes showed that the yield of NH3 produced critically depended upon the pKa value of the employed Ru(eta 2-H2) complexes. When 5 was treated with 10 equiv of trans-[RuCl(eta 2-H2)(dppe)2]X (8) with pKa = 6.0 [X = PF6, BF4, or OTf; dppe = 1,2-bis(diphenylphosphino)ethane] under 1 atm of H2, NH3 was formed in higher yields (up to 79% total yield) compared with the reaction with an equilibrium mixture of 3 and 4. If the pKa value of a Ru(eta 2-H2) complex was increased up to about 10, the yield of NH3 was remarkably decreased. In these reactions, heterolytic cleavage of H2 seems to occur at the Ru center via nucleophilic attack of the coordinated N2 on the coordinated H2 where a proton (H+) is used for the protonation of the coordinated N2 and a hydride (H-) remains at the Ru atom. Treatment of 5, trans-[W(N2)2(PMePh2)4] (14), or trans-[M(N2)2(dppe)2] [M = Mo (1), W (2)] with Ru(eta 2-H2) complexes at room temperature led to isolation of intermediate hydrazido(2-) complexes such as trans-[W(OTf)(NNH2)(PMe2Ph)4]OTf (19), trans-[W(OTf)(NNH2)(PMePh2)4]OTf (20), and trans-[WX(NNH2)(dppe)2]+ [X = OTf (15), F (16)]. The molecular structure of 19 was determined by X-ray analysis. Further ruthenium-assisted protonation of hydrazido(2-) intermediates such as 19 with H2 at 55 degrees C was considered to result in the formation of NH3, concurrent with the generation of W(VI) species. All of the electrons required for the reduction of N2 are provided by the zerovalent tungsten.     

Short-chain model studies on emission properties of poly(9-vinylphenanthrene-co-p-N,N-dimethylaminostyrene): Exciplex quenching and subsequent formation of another fluorescent exciplex

The emission properties of 1-(4-dimethylaminophenyl)-3-(9-phenanthryl)propane, Ph(CH₂)₃ DMA, and 1,3-di-(9-phenanthyrl)propane, Ph(CH₂)₃Ph, were studied in comparison with those of poly(9-vinylphenanthrene-co-p-N,N-dimethylaminostyrene). Ph(CH₂)₃DMA showed an intense intramolecular exciplex fluorescence in dioxane. Ph(CH₂)₃Ph did not exhibit a clear intramolecular excimer fluorescence. The quenching of the intramolecular exciplex by several electron acceptors was studied. As a result moderate electron acceptors, such as cyanobenzene, methyl benzoate, and acrylonitrile, selectively quenched the intramolecular exciplex, and in the case of cyanobenzene the subsequent formation of another fluorescent exciplex was observed. The results were discussed in terms of the reduction potentials of electron accepting quenchers.