Ligand Substitution Reaction of Bis(ethylenediamine)glycinatocobalt(III) Complex with Ethylenediamine Catalyzed by the Photo-excited Tris(2,2′-bipyridine)ruthenium(II) Complex

Substitution reaction with ethylenediamine of coordinated glycinate ligand in bis(ethylenediamine)-glycinatocobalt(III) complex has been studied in the presence of photo-excited tris(2,2′-bipyridine)ruthenium(II) complex in alkaline aqueous solution (buffered around pH 12) containing 1.0M chloride ion at 25°C. VIS absorption and CD spectra were used for the racemate and the optically active isomers of the Co(III) complexes, respectively. The reaction was catalyzed by the excited Ru(II) complex to give tris(ethylenediamine)cobalt(III) complex. Mechanism of the ligand-substitution reaction and role of the excited Ru(II) complex were discussed.     

Scale-up of high shear granulation based on the internal stress measurement

Scale-up of wet granulation in a vertical high shear mixer was conducted. Pharmaceutical excipient powders composed of lactose, cornstarch and micro-crystallinecellulose, and hydroxypropylcellulose as a binder were mixed together and then granulated with purified water under various operating conditions and vessel scales. A novel internal stress measurement system was developed and stress of normal and tangential directions that granules received from the agitator blade during the granulation was continuously measured. The results indicated that granules received stress mainly from the tangential direction, which also showed the largest value near at the vessel wall. The effects of the agitator tip speed and the centrifugal acceleration on the measured stress was investigated. It was found that the tip speed of the agitator blade could be the main factor for the granule growth. The physical properties such as strength, size distribution and compressibility of granules prepared by changing the operating conditions and the vessel scales were evaluated and the scale-up characteristics of high shear granulation were investigated experimentally. The results showed that these physical properties had linear correlations with the tip speed. It was finally concluded that the scale-up of high shear granulation could be well conducted by means of the tip speed of the agitator blade.     

Symmetry or asymmetry in cheletropic additions forming cyclopropanes

Cheletropic additions forming cyclopropane rings were studied theoretically. Ten addition paths were traced by means of density-functional-theory calculations. Two 1,4-dienes, 1,4-pentadiene, and tricyclo[5.3.1.0^4,9]undeca-2,5-diene were adopted as substrates. CO, SO₂, C₂H₅PCl₂, CCl₂ and SiCl₂ were employed as cheletropic reagents (Xs). An orbital correlation diagram of the Woodward–Hoffmann (W–H) rule and frontier molecular orbital (FMO) interactions between them were investigated in detail. The FMO interactions, HOMO (1,4-diene)lumo (X) and homo (X)LUMO (diene), work reasonably for the progress of the reactions. Those cause the formation of two C–X bonds and a cyclopropane ring, and alternation of double bonds to single bonds. All the additions are concerted. The easiness of the ring formation depends upon the energy gap between HOMO and lumo and that between homo and LUMO, and the spatial directions of HOMO and LUMO extensions. Symmetry conservation of the W–H rule does not hold necessarily for those addition paths. The symmetry-breaking was discussed in terms of FMO interactions.Acknowledgement This work was supported by a Grant-in-Aid for Scientific Research from the Ministry of Education, Science and Culture, Japan and by Nishida Memorial Foundation for Fundamental Chemical Research.     

Rate of spontaneous deactivation of styryl and α-methylstyryl carbanions

The deactivation of α-methylstyryl and styryl carbanions followed by spectral change and titration was studied kinetically. First-order rate constants were obtained for the deactivation of oligo-α-methylstyryl lithium, disodium, and dipotassium in tetrahydrofuran and of polystyryl potassium in varying degrees of polymerization in benzene that contained a small amount of tetrahydrofuran and n-hexane. It was observed that the addition of cryptate [222] exerts a significant effect on the system of oligo-α-methylstyryl disodium in tetrahydrofuran. The effect of dilution, degree of polymerization of the polymer, and counterions on the rate of deactivation of carbanions was discussed.     

A glucose electrode based on carbon paste chemically modified with a ferrocene-containing siloxane polymer and glucose oxidase,coated with a poly(ester-sulfonic acid) cation-exchanger

A carbon-paste chemically modified with glucose oxidase and a ferrocene-containing siloxane polymer was further modified by coating the electrode surface with a poly(ester-sulfonic acid) cation-exchanger, Eastman AQ-29D. The polymer is obtained as a homogeneous aqueous dispersion at pH 5–6; when dried, the polymer coating is not water-soluble. The coating was shown not to be detrimental to the enzyme activity but to prevent electrochemically active anionic interferents such as ascorbate and urate from reaching the electrode surface. The polymer coating also prevented glucose oxidase from leaking out of the carbon paste into the contacting solution and protected the electrode surface from fouling agents present in urine and bovine serum albumin. Uncoated electrodes lost some 10-2-15% of their original response to glucose after storage in buffer for three weeks whereas the response of the coated electrodes remained constant. Calibration curves for glucose were strictly linear up to about 5 mM for uncoated and up to 20 mM for coated electrodes. The response current to glucose was not decreased after coating.     

A new method for the synthesis of novel 1,2,4-triazolo[3,4-f][1,2,4]triazines

Novel compounds 8-(quinoxalin-2-yl)-1,2,4-triazolo[3,4-f][1,2,4]triazines 3a,b were obtained by a new annulation method in the 1,2,4-triazine synthesis.     

Rapid fermentation of beer using an immobilized yeast multistage bioreactor

The characteristics of yeast sulfite metabolism in a multistage bioreactor system for beer fermentation were investigated. No sulfite was produced in the continuous stirred-tank reactor (CSTR). However, large amounts were produced in the packed-bed reactor (PBR). Production of sulfite in the PBR seems to be inevitable when it is operated continuously. In order to control the sulfite level in the young beer, the yeast needs to be reactivated into the growth phase. One possible strategy to achieve this is to aerate and periodically remove yeast clogged in the reactor once every 6–7 months before the sulfite level exceeds a given concentration (e.g., 20 mg/L). It was confirmed that sulfite production is closely related to the growth condition of the yeast and is therefore important to consider in the control strategy for sulfite when using the immobilized yeast reactor for beer production.     

DNA PHOTOREACTIVATING ENZYME FROM SILKWORM

An ammonium-sulfate-precipitable (33–70%) fraction in extracts from eggs of silkworm Bombyx mori contains photoreactivating enzyme that reactivates the transforming activity of UV inactivated Hemophilus influenzae DNA. The action spectrum for in vitro photoreactivation with the enzyme has a broad peak around 365–385 nm, with a shoulder extending to 460 nm. This relatively higher photoreactivation efficiency at wavelengths longer than 450 nm seems to be a unique feature of DNA photoreactivating enzyme of silkworm. Using gel filtration, a mol wt of 42,000 was estimated for the enzyme. Optimum and isoionic pH of the enzyme were 7.2 and 5.4, respectively. These properties of silkworm enzyme are within the range of variations in reported biochemical characteristics of photoreactivating enzymes from different species.     

Molecular-shape recognition of polycyclic aromatic hydrocarbons in reversed phase liquid chromatography

Summary The molecular-shape recognition of polycyclic aromatic hydrocarbons has been studied on various stationary phases in reversed-phase high-performance liquid chromatography. The examined stationary phases were phenyl-, diphenyl-, triphenyl- and benzyl-bonded silicas. The results of regression analysis inidcated that triphenylsilica is the best packing material to recognize the difference in the molecular-shape of structural isomers. This fact was confirmed by the separation of 4-ring isomers.     

Preparation and gas separation properties of zeolite T membrane

Zeolite T membranes were synthesized on tubular porous mullite tubes by hydrothermal synthesis. The membranes selectively permeated carbon dioxide from CO2/CH4 and CO2/N2 mixtures with high separation performances, which were due to combined effects of molecular sieving and competitive adsorption.