X-ray gated Mössbauer spectroscopic studies on57Co-labelled cobalt/II/ fluoride

KX-ray-gated emission Mössbauer spectra of⁵⁷Co-labelled CoF₂ and CoF₂.2H₂O were measured at room temperature, using the coincidence technique. A difference was found in the relative intensity of⁵⁷Fe(II)/⁵⁷Fe(III) between the X-ray-gated and non-gated emission spectra. The results are explained in terms of local radiolytic effects of water of crystallization and the chemical effects associated with the de-excitation processes caused by EC-decay.     

A synthesis, including asymmetric synthesis, of α-quaternary α-amino aldehydes from ketones and chloromethyl p-tolyl sulfoxide via sulfinylaziridines

Treatment of 1-chlorovinyl p-tolyl sulfoxides, prepared from ketones and chloromethyl p-tolyl sulfoxide, with N-lithio arylamines resulted in the formation of sulfinylaziridines in good to high yields. The sulfinylaziridines were treated with N-lithio aniline or N-lithio p-chloroaniline to afford α-quaternary α-amino aldehydes in good yields. From α-quaternary α-amino aldehydes, α-quaternary α-amino acid esters and β-quaternary β-amino alcohols were obtained. When optically active chloromethyl p-tolyl sulfoxide was used in this procedure, a method for the synthesis of optically active α-quaternary α-amino aldehydes was realized. The reaction mechanism, including asymmetric induction, for the formation of the sulfinylaziridines is described.     

A one‐dimensional iodine‐bridged PtII/PtIV mixed‐valence complex,catena‐poly[[[bis­(ethyl­ene­diamine)­platinum(II)]‐μ‐iodo‐[bis­(ethyl­ene­di­amine)platinum(IV)]‐μ‐iodo] hydrogenphosphate dihydrogenphosphate iodide trihydrate]

The title compound, {[Pt^IIPt^IVI₂(C₂H₈N₂)₄](HPO₄)(H₂PO₄)I·3H₂O}_n, has a chain structure composed of square‐planar [Pt(en)₂]²⁺ and elongated octa­hedral trans‐[PtI₂(en)₂]²⁺ cations (en is ethyl­ene­diamine) stacked alternately along the c axis and bridged by the I atoms; a three‐dimensionally valence‐ordered system exists with respect to the Pt sites. The title compound also has a unique cyclic tetra­mer structure composed of two hydrogenphosphate and two dihydrogenphosphate ions connected by strong hydrogen bonds [O⋯O = 2.522 (10), 2.567 (10) and 2.569 (11) Å]. The Pt and I atoms form a zigzag ⋯I—Pt^IV—I⋯Pt^II⋯ chain, with Pt^IV—I bond distances of 2.6997 (7) and 2.6921 (7) Å, inter­atomic Pt^II⋯I distances of 3.3239 (8) and 3.2902 (7) Å, and Pt^IV—I⋯Pt^II angles of 154.52 (3) and 163.64 (3)°. The structural parameters indicating the mixed‐valence state of platinum, expressed by δ = (Pt^IV—I)/(Pt^II—I), are 0.812 and 0.818 for the two independent I atoms.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Integration of gene amplification and capillary gel electrophoresis on a polydimethylsiloxane-glass hybrid microchip

We report on the development of a hybrid polydimethylsiloxane (PDMS)-glass microchip for genetic analysis by functional integration of polymerase chain reaction (PCR) and capillary gel electrophoresis (CGE), and on related temperature control systems for PCR on a PDMS-glass hybrid microchip. The microchip was produced by molding PDMS against a microfabricated master with comparatively simple and inexpensive methods. PCR was successfully carried out on the PDMS-glass hybrid microchip with 500 bp target of lambdaDNA and the amplified gene was subsequently analyzed by CGE on the same PDMS-glass microchip. The chip could be considered as an inexpensive single-use apparatus compared to glass or silicon-made microchips for the same purpose.     

Oxovanadium(IV) and -(V) complexes of dithiocarbazate-based tridentate Schiff base ligands: syntheses,structure, and photochemical reactivity of compounds involving imidazole derivatives as coligands

The tridentate dithiocarbazate-based Schiff base ligands H(2)L (S-methyl-3-((5-R-2-hydroxyphenyl)methyl)dithiocarbazate, R = NO(2), L = L(2); R = Br, L = L(3)) react with [VO(acac)(2)] in the presence of imidazole derivatives as coligands to form oxovanadium(IV) and cis-dioxovanadium(V) complexes. With benzimidazole and N-methylimidazole, the products are oxovanadium(IV) complexes, viz. [VOL(3)(BzIm)].0.5CH(3)CN (1a) and [VOL(N-MeIm)(2)] (L = L(3), 1b; L = L(2), 1c), respectively. In both 1a,b, the O and S donor atoms of the tridentate ligand are cis to the terminal oxo group (in the "equatorial" plane) and mutually trans, but the N donor atom is respectively cis and trans to the oxo atom, as revealed from X-ray crystallography. When imidazole or 4-methylimidazole is used as the ancillary ligand, the products obtained are water-soluble cis-dioxovanadium(V) complexes [VO(2)L(R'-ImH)] (L = L(3) and L(2), R' = H and Me, 2a-d). These compounds have zigzag chain structures in the solid state as confirmed by X-ray crystallographic investigations of 2a,d, involving an alternating array of LVO(2)(-) species and the imidazolium counterions held together by Coulombic interactions and strong hydrogen bonding. Complexes 2a-d are stable in water or methanol. In aprotic solvents, viz. CH(3)CN, DMF, or DMSO, however, they undergo photochemical transformation when exposed to visible light. The putative product is a mixed-oxidation divanadium(IV/V) species obtained by photoinduced reduction as established by EPR, electronic spectroscopy, and dynamic (1)H NMR experiments.     

Noncatalytic kinetic study on site-selective H/D exchange reaction of phenol in sub- and supercritical water

The site-selective H/D exchange reaction of phenol in sub- and supercritical water is studied without added catalysts. In subcritical water in equilibrium with steam at 210-240 degrees C, the H/D exchange proceeds both at the ortho and para sites in the phenyl ring, with no exchange observed at the meta site. The pseudo-first-order rate constants are of the order of 10(-4) s(-1); 50% larger for the ortho than for the para site. In supercritical water, the exchange is observed also at the meta site with the rate constant in the range of 10(-6)-10(-4) s(-1). As the bulk density decreases, the exchange slows down and the site selectivity toward the ortho is enhanced. The enhancement is due to the phenol-water interaction preference at the atomic resolution. The site selectivity toward the ortho is further enhanced when the reaction is carried out in benzene/water solution. Using such selectivity control and the reversible nature of the hydrothermal deuteration/protonation process, it is feasible to synthesize phenyl compounds that are deuterated at any topological combination of ortho, meta, and para sites.     

Noticeable facilitation of the bismuth-mediated Barbier-type allylation of aromatic carbonyl compounds under solvent-free conditions

When milled together with bismuth shot in the presence of allyl halide, aromatic aldehydes readily underwent a Barbier-type allylation to afford the corresponding homoallyl alcohols in good yield. In contrast to the failure in solution reaction, aromatic ketones also underwent allylic carbonyl addition under solvent-free conditions to give the expected tertiary homoallyl alcohols in moderate to good yield.     

Cationic copolymerization of indene with styrene derivatives: Synthesis of random copolymers of indene with high molecular weight

Random copolymers with high molecular weights of indene and p‐methylstyrene (pMeSt) were synthesized by cationic polymerization with trichloroacetic acid/tin tetrachloride in CH₂Cl₂ at low temperatures. When indene and pMeSt (1:1 v/v), for example, were polymerized at ?40 °C, both monomers were consumed at very similar rates to give a copolymer with high molecular weight [number‐average molecular weight (M_n): 8–9 × 10⁴]. This is indeed quite unexpected behavior for the combination of these two monomers because pMeSt polymerized over 1000 times faster than indene in the homopolymerization under the reaction conditions previously described. The product copolymer of indene and pMeSt had a random monomer sequence in it that was confirmed by NMR analyses and thermal‐property measurements. In sharp contrast with pMeSt, styrene and p‐chlorostyrene, which have no electron‐donating groups on the phenyl ring, led to low molecular weight polymers (M_n < 10,000) in the copolymerization with indene (1:1 v/v). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2449–2457, 2002     

Enantioselective carbanion cyclization of 5-alkenyl carbamates induced by asymmetric lithiation with s-butyllithium/(−)-sparteine system

Treatment of (E)-6-phenyl-5-hexenyl carbamates with s-BuLi/(−)-sparteine is shown to afford the trans-1,2-disubstituted cyclopentane derivatives in high % ee, along with the bicyclo[3.1.0]hexanes (bicyclization products).