Highly selective palladium catalyzed kinetic resolution and enantioselective substitution of racemic allylic carbonates with sulfur nucleophiles: asymmetric synthesis of allylic sulfides,allylic sulfones,and allylic alcohols

We describe the highly selective palladium catalyzed kinetic resolutions of the racemic cyclic allylic carbonates rac-1 a-c and racemic acyclic allylic carbonates rac-3 aa and rac-3 ba through reaction with tert-butylsulfinate, tolylsulfinate, phenylsulfinate anions and 2-pyrimidinethiol by using N,N'-(1R,2R)-1,2-cyclohexanediylbis[2-(diphenylphosphino)-benzamide] (BPA) as ligand. Selectivities are expressed in yields and ee values of recovered substrate and product and in selectivity factors S. The reaction of the cyclohexenyl carbonate 1 a (>/=99 % ee) with 2-pyrimidinethiol in the presence of BPA was shown to exhibit, under the conditions used, an overall pseudo-zero order kinetics in regard to the allylic substrate. Also described are the highly selective palladium catalyzed asymmetric syntheses of the cyclic and acyclic allylic tert-butylsulfones 2 aa, 2 b, 2 c, 2 d and 4 a-c, respectively, and of the cyclic and acyclic allylic 2-pyrimidyl-, 2-pyridyl-, and 4-chlorophenylsulfides 5 aa, 5 b, 5 ab, 6 aa-ac, 6 ba and 6 bb, respectively, from the corresponding racemic carbonates and sulfinate anions and thiols, respectively, in the presence of BPA. Synthesis of the E-configured allylic sulfides 6 aa, 6 ab, 6 ac and 6 bb was accompanied by the formation of minor amounts of the corresponding Z isomers. The analogous synthesis of allylic tert-butylsulfides from allylic carbonates and tert-butylthiol by using BPA could not be achieved. Reaction of the cyclopentenyl esters rac-1 da and rac-1 db with 2-pyrimidinethiol gave the allylic sulfide 5 c having only a low ee value. Similar results were obtained in the case of the reaction of the cyclohexenyl carbonate rac-1 a and of the acyclic carbonates rac-3 aa and rac-3 ba with 2-pyridinethiol and lead to the formation of the sulfides 5 ab, 6 ab, and 6 bb, respectively. The low ee values may be ascribed to the operating of a "memory effect", that is, both enantiomers of the substrate give the substitution product with different enantioselectivities. However, in the reaction of the racemic carbonate rac-1 a as well as of the highly enriched enantiomers 1 a (>/=99 % ee) and ent-1 a (>/=99 % ee) with 2-pyrimidinethiol the ee values of the substrates and the substitution product remained constant until complete conversion. Similar results were obtained in the reaction of the cyclic carbonates rac-1 a, ent-1 a (>/=99 % ee) and ent-1 c (>/=99 % ee) with lithium tert-butylsulfinate. Thus, in the case of rac-1 a and 2-pyrimidinthiol and tert-butylsulfinate anion as nucleophiles the enantioselectivity of the substitution step is, under the conditions used, independent of the chirality of the substrate; this shows that no "memory effect" is operating in this case. Hydrolysis of the carbonates ent-1 a-c, ent-3 aa and ent-3 ba, which were obtained through kinetic resolution, afforded the enantiomerically highly enriched cyclic allylic alcohols 9 a-c (>/=99 % ee) and acyclic allylic alcohols 10 a (>/=99 % ee) and 10 b (99 % ee), respectively.     

Non-aqueous capillary electrophoresis of the positional isomers of a sulfated monosaccharide

A non-aqueous capillary electrophoresis (NACE) method coupled to indirect absorbance detection has been developed for the separation of the three positional isomers of monosulfated fucose. The optimized electrolyte was composed of 12 mM ethanolamine, 2 mM trimesic acid buffer in a methanol-ethanol (1:1, v/v) mixture. As the retained electrolyte entails no separating agent other than the pH buffer, the NACE separation of the positional isomers has been ascribed mainly to selective ion-pairing with the electrolyte counter-ion and the possibility of a selective solvation effect in the alcohol mixture. In the absence of pure isomeric standards, peak identification was completed by MS and NMR spectroscopy and selective enzymatic desulfation. This method should be of interest for the structure elucidation of monosulfated fucose-based polysaccharides and for the screening of sulfoesterase of unknown activity.     

Synthesis of an ethidium nucleoside and its acyclic analog

The protected ethidium nucleosides 8-(3′,5′-di-O-benzoyl-2′-deoxy-d-ribofuranosyl)-3-acetamido-5-ethyl-6-phenyl-phenanthridinium (5), 8-(3′,5′-di-O-acetyl-2′-deoxy-d-ribofuranosyl)-3-acetamido-5-ethyl-6-phenyl-phenanthridinium (6), and the acyclic analog 8-[(3R)-1,3-dihydroxy-4-yl]-acetamido-3-amino-5-ethyl-6-phenyl-phenanthridinium (3) were prepared. Based on to their different stability, only the acyclic derivative 3 seems to be suitable for oligonucleotide synthesis. Furthermore, the acyclic ethidium nucleoside analog 3 exhibits comparable absorption and emission properties of the underivatized ethidium (1).     

Enantioselective synthesis of alpha-methyl-D-cysteine and lanthionine building blocks via alpha-methyl-D-serine-beta-lactone

[reaction: see text] We report here the enantioselective synthesis of Boc-alpha-methyl-d-cysteine(PMB)-OH and lanthionine building blocks through the regioselective ring opening of key intermediate Boc-alpha-methyl-d-serine-beta-lactone.     

Carbazole compounds as host materials for triplet emitters in organic light-emitting diodes: polymer hosts for high-efficiency light-emitting diodes

A carbazole homopolymer and carbazole copolymers based on 9,9'-dialkyl-[3,3']-bicarbazolyl, 2,5-diphenyl-[1,3,4]-oxadiazole and 9,9-bis(4-[3,7-dimethyloctyloxy]phenyl)fluorene were synthesized and their electrical and photophysical properties were characterized with respect to their application as host in phosphorescent polymer light-emitting diodes. It is shown that the triplet energy of a polymer depends on the specific connections between its building blocks. Without changing the composition of the polymer, its triplet energy can be increased from 2.3 to 2.6 eV by changing the way in which the different building blocks are coupled together. For poly(9-vinylcarbazole) (PVK), a carbazole polymer often used as host for high-energy triplet emitters in polymer light-emitting diodes, a large hole-injection barrier of about 1 eV exists due to the low-lying HOMO level of PVK. For all carbazole polymers presented here, the HOMO levels are much closer to the Fermi level of a commonly used anode such as ITO and/or a commonly used hole-injection layer such as PEDOT:PSS. This makes high current densities and consequently high luminance levels possible at moderate applied voltages in polymer light-emitting diodes. A double-layer polymer light-emitting diode is constructed comprising a PEDOT:PSS layer as hole-injection layer and a carbazole-oxadiazole copolymer doped with a green triplet emitter as emissive layer that shows an efficacy of 23 cd/A independent of current density and light output.     

Luminescent core-shell photonic crystals from poly(phenylene ethynylene) coated silica spheres

We describe the preparation and characterization of a photonic crystal filled with a luminescent conjugated polyelectrolyte, sulfonated poly(phenylene ethynylene). The conjugated polymer was coated onto the nanospheres by the layer-by-layer method and assembled directly into a fluorescent opal structure avoiding the defects associated with post-filling schemes. These structures exhibit strong angle-dependent luminescent properties. By using multiple layers, we further demonstrate control over the emissive bands of the opal.     

Charge-mediated recognition of N-terminal tryptophan in aqueous solution by a synthetic host

The molecular recognition of peptides and proteins in aqueous solution by designed molecules remains an elusive goal with broad implications for basic biochemical research and for sensors and separations technologies. This paper describes the recognition of N-terminal tryptophan in aqueous solution by the synthetic host cucurbit[8]uril (Q8). Q8 is known to form 1:1:1 heteroternary complexes with methyl viologen (MV) and a second aromatic guest. Here, the complexes of Q8.MV with (i) the four natural aromatic alpha-amino acids, (ii) four singly charged tryptophan derivatives, and (iii) four tryptophan-containing tripeptides were characterized by isothermal titration calorimetry, mass spectrometry, and UV-visible, fluorescence, and (1)H NMR spectroscopy. We find that Q8.MV binds Trp-Gly-Gly with high affinity (K(a) = 1.3 x 10(5) M(-1)), with 6-fold specificity over Gly-Trp-Gly, and with 40-fold specificity over Gly-Gly-Trp. Analysis of the nine indole-containing compounds suggests that peptide recognition is mediated by the electrostatic charge(s) proximal to the indole, and that the mode of binding is consistent for these compounds. Complex formation is accompanied by the growth of a visible charge-transfer band and the quenching of indole fluorescence. These optical properties, combined with the stability and selectivity of this system, are promising for applications in sensing and separating specific peptides.     

Off-resonance TROSY (R1 rho - R1) for quantitation of fast exchange processes in large proteins

Current solution NMR experiments for characterizing conformational exchange processes in large proteins are limited to exchange rates ca. 500-3000 s-1. A TROSY-based constant relaxation time (R1rho - R1) experiment is designed to extend this capability to measure motion with rates up to 105 s-1 in large macromolecules. The experiment combines off-resonance spin-lock rf fields, which provide access to the faster time-scale dynamics, with TROSY coherence selection, which extends the molecular-weight range available for study. When implemented on the 53-kDa dimeric enzyme triosephosphate isomerase, the experiment yielded substantial gains in signal-to-noise (up to 60%) over current experiments at modest static magnetic fields (14.1 T). The TROSY (R1rho - R1) experiment should therefore be of general utility for investigation of fast conformational exchange events in large proteins.     

Synthesis of isotopically labeled arachidonic acids to probe the reaction mechanism of prostaglandin H synthase

Prostaglandin H synthase (PGHS) catalyzes the conversion of arachidonic acid to prostaglandin G(2) in the cyclooxygenase reaction. The first step of the mechanism has been proposed to involve abstraction of the pro-S hydrogen atom from C13 to generate a pentadienyl radical spanning C11-C15. We report here the synthesis of six site-specifically deuterated arachidonic acids to investigate the structure of the radical intermediate. The preparation of these compounds was achieved using a divergent scheme that involved one advanced intermediate for all targets. The synthetic design introduced the label late in the routes and allowed the utilization of common synthetic intermediates in the preparation of various targets. Both 13(R)- and 13(S)-deuterium-labeled arachidonic acids were synthesized in high enantiomeric purity as deduced from soybean lipoxygenase assays and mass spectrometric analysis of the resulting enzymatic products. Each synthetic compound was reacted under anaerobic conditions with the wide singlet tyrosyl radical of PGHS-2 to generate a radical intermediate that was analyzed by EPR. Deuterium substitution at positions 11, 13(S), and 15 resulted in the loss of one hyperfine interaction, indicating that the protons at these positions interact with the unpaired electron. Simulation of the spectra was achieved with one set of parameters that are consistent with the assignment of a pentadienyl radical. Use of 16-[(2)H(2)]-arachidonic acid indicated that only one of the protons at C16 gives rise to a strong hyperfine interaction. The findings are discussed in the context of two proposed mechanisms for the cyclooxygenase reaction.     

A novel silver(i)-mediated DNA base pair

We have generated a novel silver(I)-mediated unnatural DNA base pair consisting of two 2,6-bis(ethylthiomethyl)pyridine nucleobases SPy. This metallo-base pair has a remarkably high pairing stability and selectivity which rivals that of the natural base pairs dA:dT and dC:dG. UV-melting experiments revealed that the dSPy:dSPy self-pair can replace natural base pairs at multiple sites and still form stable DNA duplexes.