Multidimensional liquid chromatography for sample characterisation

While LC finds enormously widespread use in almost all areas of chemical science, the technique is limited as a means of identification because compounds do not elute with unique retention times. This limitation spurred the growth of hyphenated instrumental methods of analysis, such as LC-MS/MS, which because of the MS/ MS detection became a method of identification. However, techniques like LC-MS/ MS are specialised and require high initial purchase and running costs, inhibiting the more widespread growth of the technique. In an attempt to increase the separation power of LC, multi-dimensional LC was developed. This expanded the separation space and subsequently has allowed the development of methods with fingerprinting ability due to the lower probability of component overlap. The work in this study illustrates the application of 2-D LC as a means of chemical fingerprinting. We employed a sample base of various low molecular weight oligostyrenes and their diastereomers that represent a population of compounds whose selectivities in a one-dimensional separation are almost unity and hence essentially impossible to separate. Yet in a 2-D domain almost all individual components occupy unique 2-D retention times.     

A Poly(3,4‐ethylenedioxypyrrole)–Au@WO3‐Based Electrochromic Pseudocapacitor

A poly(3,4‐ethylenedioxypyrrole)–gold nanoparticle (Au)–tungsten oxide (PEDOP–Au@WO₃) electrochromic supercapacitor electrode capable of optically modulating solar energy while simultaneously storing/releasing energy (in the form of charge) was fabricated for the first time. WO₃ fibers, 50 to 200 nm long and 20 to 60 nm wide, were synthesized by a hydrothermal route and were electrophoretically deposited on a conducting substrate. Au nanoparticles and PEDOP were coated over WO₃ to yield the PEDOP–Au@WO₃ hybrid electrode. The inclusion of Au in the hybrid was confirmed by X‐ray diffraction, Raman spectroscopy, and energy‐dispersive X‐ray analyses. The nanoscale electronic conductivity, coloration efficiency, and transmission contrast of the hybrid were found to be significantly greater than those of pristine WO₃ and PEDOP. The hybrid showed a high specific discharge capacitance of 130 F g^?1 during coloration, which was four and ten times greater than the capacitance achieved in WO₃ or PEDOP, respectively. We also demonstrate the ability of the PEDOP–Au@WO₃ hybrid, relative to pristine PEDOP, to perform as a superior counter electrode in a solar cell, which is attributed to a higher work function. The capacitance and redox switching capability of the hybrid decreases insignificantly with cycling, thus establishing the viability of this multifunction hybrid for next‐generation sustainable devices such as electrochromic psuedocapacitors because it can concurrently conserve and store energy.     

Vanadium(III) chloride as an effective catalyst for the Pechmann reaction

Good yields of substituted coumarins were obtained by a synthetic method involving the Pechmann reaction using vanadium(III)chloride (VCl₃) reagent to effect this condensation under solvent-free conditions. Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 197–200, February, 2006.     

Expeditious Pechmann Condensation by Using Biodegradable Cellulose Sulfuric Acid as a Solid Acid Catalyst

A facile synthesis of coumarins was performed in excellent yields via Pechmann condensation by using different type of phenols and ethylacetoacetates under solvent–free media using both conventional method and microwave irradiation in short reaction times is described. The reaction workup is very simple, and the catalyst can be easily separated from the reaction mixture and reused several times in subsequent reactions.     

N-Butyl-2,4-dinitro-anilinium p-toluenesulfonate as a highly active and selective esterification catalyst

N-Butyl-2,4-dinitro-anilinium p-toluenesulfonate (1) was found to be a very active esterification catalyst that promotes condensation of equal mole amount of carboxylic acids and alcohols under mild conditions. This catalyst is also highly selective towards carboxylic acid and alcohol substrates at ambient temperature.     

Sulfamic acid: a novel and efficient catalyst for the synthesis of aryl-14H-dibenzo[a.j]xanthenes under conventional heating and microwave irradiation

A simple and convenient procedure for the synthesis of aryl-14H-dibenzo[a.j]xanthenes is described through a one-pot condensation of β-naphthol with aryl aldehydes in the presence of sulfamic acid as the catalyst in a solvent-free media using both conventional heating and microwave irradiation.     

Isolation and characterization of degradation products of citalopram and process-related impurities using RP-HPLC

A reversed-phase high-performance liquid chromatographic method for simultaneous separation and determination of citalopram hydrobromide and its process impurities in bulk drugs and pharmaceutical formulations was developed. The separation was accomplished on an Inertsil ODS 3V (250x4.6 mm; particle size 5 mum) column using 0.3% diethylamine (pH = 4.70) and methanol/acetonitrile (55:45 v/v) as mobile phase in a gradient elution mode. The eluents were monitored by a photodiode array detector set at 225 nm. The chromatographic behavior of all the related substances was examined under variable conditions of different solvents, buffer concentrations, and pH. The method was validated in terms of accuracy, precision, and linearity. The method could be of use not only for rapid and routine evaluation of the quality of citalopram in bulk drug manufacturing units but also for the detection of its impurities in pharmaceutical formulations. Three unknown impurities were consistently observed during the analysis of different batches of citalopram. Forced degradation of citalopram was carried out under thermal, photo, acidic, alkaline, and peroxide conditions. The degradation products and unknown impurities were isolated and characterized by ESI-MS/MS, (1)H NMR, and FT-IR spectroscopy.     

N,N′-(hexane-1,6-diyl)bis(N-((1-aryl/alkyl-1H-1,2,3-triazol-4-yl)methyl)-4-methyl benzenesulfonamide): Synthesis,antibacterial, antioxidant,and DNA-cleavage activities

Thirteen novel bis-1,2,3-triazole derivatives were synthesized under copper (I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition of N,N′-(hexane-1,6-diyl)bis(4-methyl-N-(prop-2-yn-1-yl)benzenesulfonamide) with different aryl azides and evaluated their biological activity. All the newly synthesized compounds were confirmed by ¹H-NMR, infrared, and elemental analysis and mass spectral studies. The synthesized bis-1,2,3-triazoles were evaluated for their antioxidant activity, and some of them were found to exhibit good to excellent antioxidant activity (IC₅₀: 11.13 ± 1.5 to 98.98 ± 1.7 μM) in comparison with standard references, Trolox (11.73 ± 1.5 μM) and ascorbic acid (3.34 ± 1.8 μM). The bistriazoles also exhibited excellent-to-moderate anti-bacterial activity (MIC: 2.253 to 75 µg mL^?1 against Bacillus subtilis, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa when compared with streptomycin. N,N′-(hexane-1,6-diyl)bis(N-((1-(3,5-dimethylphenyl)-1H-1,2,3-triazol-4-yl)methyl)-4-methyl benzenesulfonamide) has completely cleaved the DNA at a concentration of 100 mg mL^?1, and the remaining compounds have partially cleaved the DNA.     

Design,synthesis, and biological evaluation of novel substituted imidazo[2,1-a]isoindole derivatives as antibacterial agents

An efficient protocol has been developed for the synthesis of fused imidazo[2,1-a]isoindol-5-ones (2a–d) from 2-iodo benzoic acids and N,N-carbonyldiimidazole (CDI) using one-pot Pd-catalyzed C?C bond coupling. The reaction of imidazo[2,1-a]isoindol-5-one (2a–d) with substituted α-bromo ketones in toluene afforded corresponding imidazo[2,1-a]isoindolium derivatives (3a–i) in good yields. The structures of the title compounds were well established on the basis of infrared (IR), ¹H NMR, carbon-13 nuclear magnetic resonance (¹³C NMR), mass spectral data, and elemental analysis (C, H, and N). In vitro antibacterial results revealed that, the compounds 3b and 3i were found to possess an excellent broad spectrum of inhibiting potency against all the tested bacterial strains with minimum inhibitory concentration values ranging from 3.125 to 25?µg mL^?1.     

Synthesis of novel [1,2,3]triazolo[4′,5′:3,4]pyrrolo[1,2-a]thieno[2,3-d] pyrimidines: Potent EGFR targeting anti-breast cancer agents

In this study, we designed and synthesized several novel fused [1,2,3]triazolo [4′,5′:3,4]pyrrolo[1,2-a]thieno[2,3-d]pyrimidine derivatives using in a single [3 + 2] reaction cycloaddition reaction of 3-(3-iodoprop-2-yn-1-yl)thieno[2,3-d]pyrimidin-4(3H)-one ( 4 ) followed by C-C bond coupling with various aryl azides in a PEG-400 medium. All of the newly synthesized compounds were evaluated in vitro for EGFR kinase inhibitory action as well as anti-breast cancer activity against MDA-MB-231 and MCF-7 breast cancer cell lines. When compared to the reference molecule, erlotinib, the majority of the compounds demonstrated adequate efficacy. The most promising compounds, 5g and 5i , demonstrated excellent anticancer activity against both cancer cell lines, with IC₅₀ values ranging from 04.17 ± 0.55 to 8.65 ± 0.89 μM, respectively, as well as excellent kinase inhibitory activities (EGFR: IC₅₀ = 0.467 ± 0.063 and 0.412 ± 0.081 μM). The in silico studies of five potent compounds 5f , 5g , 5h , 5i , and 5k were also carried out to identify the interactions against the EGFR receptor and found that the energy calculations were covenant with the obtained IC₅₀ values.