On-column complexation capillary electrophoretic separation of Fe2+ and Fe3+ using 2,6-pyridinedicarboxylic acid coupled with large-volume sample stacking

On-column complexation of Fe2+ and Fe3+ with 2,6-pyridinedicarboxylic acid (2,6-PDCA) formed anionic complexes, which were then separated by capillary zone electrophoresis with direct UV detection at 214 nm. To achieve reasonable separation selectivity and on-column complexation, the conditions such as pH, the concentration of 2,6-PCDA and the EOF modifiers in the electrolyte were examined. The electrolyte contained 5.0 mM 2,6-PDCA, 0.25 mM tetradecyltrimethlammonium bromide (TTAB) and 5% (v/v) acetonitrile at pH 4.0 was optimised for on-column complexation and the separation of Fe[PCDA]2(2-) and Fe[PCDA]2(-). To enhance the detection sensitivity, large-volume sample stacking (LVSS) was used for the on-line preconcentration of Fe[PCDA]2(2-) and Fe[PCDA]2(-). Under the optimised conditions, satisfactory working ranges (0.5-50 microM), lower detection limits (less than 0.1 microM) and good repeatability of the peak areas (R.S.D.: 5.2-7.8%, n = 5) was achieved using LVSS (300 s). With LVSS, the detection sensitivity was enhanced more than 50-fold compared to conventional hydrodynamic injection. The proposed method was used successfully for the determination of Fe2+ and Fe3+ in water samples.     

High performance liquid chromatographic-mass spectrometric assay for the quantitation of BMS-204352 in dog K(3)EDTA plasma

A high performance liquid chromatographic-mass spectrometric (LC/MS) assay was developed and validated for the determination of BMS-204352 in dog K(3)EDTA plasma. A 0.5 mL aliquot of control plasma was spiked with BMS-204352 and internal standard (IS) and buffered with 1 mL of 5 mM ammonium acetate. The mixture was then extracted with 3 mL of toluene. After separation and evaporation of the organic phase to dryness using nitrogen at 40 degrees C, the residue was reconstituted in the mobile phase and 25 microL of the sample were injected onto a Hypersil C(18) column (2 x 50 mm; 3 microm) at a flow rate of 0.5 mL/min. The mobile phase was consisted of two solvent mixtures (A and B). Solvent A was composed of 5 mM ammonium acetate and 0.1% triethylamine in 75:25 v/v water:methanol, pH adjusted to 5.5 with glacial acetic acid, and solvent B was 5 mM ammonium acetate in methanol. A linear gradient system was used to elute the analytes. The mass spectrometer was programmed to admit the de-protonated molecules at m/z 352.7 (IS) and m/z 357.9 (BMS-204352). Standard curves of BMS-204352 were linear (r(2) > or = 0.998) over the concentration range of 0.5-1000 ng/mL. The mean predicted quality control (QC) concentrations deviated less than 5.1% from the corresponding nominal values (ie 4, 80, 400 and 2000 ng/mL); the within- and between-assay precision of the assay were within 5.5% relative standard deviation. Stability of BMS-204352 was confirmed after at least three freeze/thaw cycles and BMS-204532 was stable in dog plasma when stored frozen at or below -20 degrees C for at least 16 weeks in spiked QC samples and for at least 4 1/2 weeks for in vivo study samples. BMS-204352 and IS were stable in the injection solvent at room temperature for at least 24 h. The assay was applied to delineate the pharmacokinetic disposition of BMS-204352 in dogs following a single intravenous dose administration. In conclusion, the assay is accurate, precise, specific, sensitive and reproducible for the pharmacokinetic analysis of BMS-204532 in dog plasma.     

Ln0.5A0.5MnO3 (Ln=Lanthanide,A= Ca,Sr) Perovskites Exhibiting Remarkable Performance in the Thermochemical Generation of CO and H2 from CO2 and H2O

Perovskite oxides of the Ln_0.5A_0.5MnO₃ (Ln=lanthanide, A=Sr, Ca) family have been investigated for the thermochemical splitting of H₂O and CO₂ to produce H₂ and CO respectively. The amounts of O₂ and CO produced strongly depend on the size of the rare earth ions and alkaline earth ions. The manganite with the smallest rare earth possessing the highest distortion and size disorder as well as the smallest tolerance factor, gives out the maximum amount of O₂, and, hence, the maximum amount of CO. Thus, the best results are found with Y_0.5Sr_0.5MnO₃, which possesses the highest distortion and size disorder. Y_0.5Sr_0.5MnO₃ shows remarkable fuel production activity even at the reduction and oxidation temperatures as low as 1200 °C and 900 °C, respectively.     

Ionic liquid‐based dispersive liquid–liquid microextraction followed by RP‐HPLC determination of saquinavir in rat serum: application to pharmacokinetics

An ionic liquid‐based dispersive liquid–liquid microextraction followed by RP‐HPLC determination of the most commonly prescribed protease inhibitor, saquinavir, in rat plasma was developed and validated. The effects of different ionic liquids, dispersive solvents, extractant/disperser ratio and salt concentration on sample recovery and enrichment were studied. Among the ionic liquids investigated, 1‐butyl‐3‐methylimidazolium hexafluorophosphate was found to be most effective for extraction of saquinavir from rat serum. The recovery was found to be 95% at an extractant/disperser ratio of 0.43 using 1‐butyl‐3‐methylimidazolium hexafluorophosphate and methanol as extraction and dispersive solvents. The recovery was further enhanced to 99.5% by addition of 5.0% NaCl. A threefold enhancement in detection and quantification limits was achieved, at 0.01 and 0.03 µg/mL, compared with the conventional protein precipitation method. A linear relationship was observed in the range of 0.035–10.0 µg/mL with a correlation coefficient (r²) of 0.9996. The method was validated and applied to study pharmacokinetics of saquinavir in rat serum. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of some analogues of (±)gelliusine F, (±)gelliusine E,and total synthesis of 2,2-di(6′-bromo-3′-indolyl)ethylamine

Synthesis of some analogues of indole based marine alkaloid (±)gelliusine F, (±)gelliusine E, and total synthesis of 2,2-di(6′-bromo-3′-indolyl)ethylamine are reported.     

Investigation of Copper(II) Interference on the Anodic Stripping Voltammetry of Lead(II) and Cadmium(II) at Bismuth Film Electrode

The bismuth‐coated electrode is known to be prone to errors caused by copper(II). This study investigates copper(II) interference at bismuth film electrode for the detection of lead(II) and cadmium(II). It was conducted using glassy carbon electrode, while the bismuth film was plated in situ simultaneously with the target metal ions at ? 1200 mV. Copper(II) presented in solution significantly reduced the sensitivity of the electrode, for example there was an approximately 70 % and 90 % decrease in peak signals for lead(II) and cadmium(II), respectively, at a 10‐fold molar excess of copper(II). The decrease in sensitivity was ascribed to the competition between copper and bismuth or the metal ions for surface active sites. Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) analysis suggested a large decrease in the amount of bismuth nanoparticles formed on the electrode surface in the presence of copper(II) occurred, validating the competition between copper and bismuth ions for surface active sites. Recovery of the stripping signal of lead(II) and cadmium(II) was obtained by adding ferrocyanide ion to the solution. Finally, the proposed method was successfully applied to determine lead(II) and cadmium(II) in water samples and the method was validated by ICP‐MS technique.     

Synthesis of Functionalized Dihydrofurocoumarin Derivatives from 3-Aminoalkyl-4-hydroxycoumarin

Some dihydrofuro-fused coumarin derivatives were synthesized from 3-aminoalkyl-4-hydroxycoumarin via in situ generation of N-ylide. The 3-aminoalkylated 4-hydroxycoumarin derivatives were synthesized from one-pot, three-component reaction of 4-hydroxycoumarin, aryl aldehydes, and secondary amines in ethanol at room temperature. Again, when salicylaldehyde was employed instead of benzaldehyde, interestingly pyranocoumarins were obtained. The reaction protocol can be further explored toward the synthesis of many other heterocyclic fused dihydrofurans.     

Novel monofunctionalized electron-deficient anthraquinone-based discotic liquid crystals

A series of electron-deficient 1-hydroxy-2,3,5,6,7-pentaalkoxyanthra-9,10-quinones has been synthesized. All nine members of the series were found to be liquid crystalline, forming columnar mesophases over a broad temperature range. Such supramolecular building blocks can be used for the preparation of novel discotic dimers, oligomers, polymers and metallomesogens.     

Expression of Avian Influenza Virus (H5N1) Hemagglutinin and Matrix Protein 1 in Pichia pastoris and Evaluation of their Immunogenicity in Mice

The conventional avian influenza vaccines rely on development of neutralizing antibodies against the HA and NA antigens. However, these antigens are highly variable, and hence there is a need for better vaccine candidates which would offer broader protection in animals. The M1 of avian influenza is another major structural protein that has conserved epitopes that are reported to induce CD8+ T cells and can contribute to protection against morbidity and mortality from influenza. Hence in an effort to study the immune response of rM1 either alone or in combination with rHA, the hemagglutinin (HA) and matrix protein (M1) of A/Hatay/2004/H5N1 strain of avian influenza were expressed in Pichia pastoris as his-tagged proteins and purified through Ni-NTA chromatography. The His-tag was removed using TEV protease cleavage site and the immunogenicity of purified rHA and rM1 either alone or in combination was determined in mice. One group of mice was immunized with 5 μg of purified rHA, the other group was immunized with rM1, and a third group of mice were immunized with 5 μg of rHA and rM1. All the animals were boosted twice, once on 28 days postimmunization (dpi) and the second on 42 dpi. The immune response was evaluated by enzyme-linked immunosorbent assay (ELISA) and hemagglutination inhibition (HI) assay. The group of mice immunized with rHA and rM1 together showed significantly higher immune response against rHA and rM1 than mice immunized with either HA or M1 antigens. The addition of rM1 with rHA resulted in increased HI titer in animals immunized with both the antigens. These results suggest that the HA and M1 expressed in P. pastoris can be utilized in combination for the development of faster and cost-effective vaccines for circulating and newer strains of avian influenza and would aid in combating the disease in a pandemic situation, in which production time matters greatly.     

Insights into two solution procedures for the single machine tardiness problem

This paper explores the well-known modified due date (MDD) rule for minimizing total tardiness on a single machine and shows that it has a decomposition structure. Based on this finding, we propose a decomposition heuristic and draw parallels to the famous optimal decomposition algorithm. We demonstrate that the MDD rule and the decomposition algorithm have striking similarities. We also discuss the key differences between these procedures. Finally, we present a sufficient condition under which the MDD rule is optimal and conclude the paper with some directions for future research.