Dependence of polarization mode dispersion of slotted core NZDF ribbon on cable design and environmental conditions

Non-zero dispersion fiber (NZDF) ribbon cable has recently become a considerable alternative in long-haul high-speed network construction. Since long-distance high-bit rate transmission requires low polarization mode dispersion (PMD), it is very important to know the PMD performance of this type of optical fiber cables. In this paper, we report experimental analysis of effects of the cable design and environmental parameters, in particular ribbon thickness, positions of fibers in the ribbon, flexing and vibration, on PMD performances of several slotted-core fiber ribbon cables. Results show that ribbon thickness and positions of fibers in the ribbon alter the PMD values of NZDF ribbon cables. Also, 23% and 11% PMD variations have been determined in flexing and vibration experiments, respectively. Moreover, it has been observed that vibration amplitude has significant effects and vibration frequency has little effects (14% and 6% variations, respectively) on fiber PMD. Results are important for understanding effects of installation conditions and wind, especially for aerial fibers, on PMD values of cables.     

Paramagnetic contribution of serum iron to the spin-spin relaxation rate (1/T 2) measured by MRI

Spin-spin relaxation timeT ₂ values of serum with and without iron were measured by magnetic resonance imaging (MRI) to find the proton relaxivity of Fe(III) in serum.T ₂ values in serum containing definite amounts of added iron were also measured before and after addition of ascorbic acid. The difference in the 1/T ₂ of serum with and without ascorbic acid was used for recalculation of the added iron values. Recalculated iron values confirm that the difference in healthy serum is caused by iron only. In addition, in order to find the paramagnetic contribution of serum iron,T ₂ values of iron-deficient, healthy and iron-overloaded serum were measured before and after addition of ascorbic acid. The difference in the 1/T ₂ values was then applied to the calculation of the serum iron values. The consistency of iron values determined from the difference to those by autoanalyzer suggests that the differences in diseased serum also represent the paramagnetic contribution of serum iron. The data imply that serum iron content in healthy, iron-deficient and iron-overloaded serum may be assessed by MRI.     

An ordering (enumerative) algorithm for nonlinear 0-1 programming

In this paper, a new algorithm to solve a general 0–1 programming problem with linear objective function is developed. Computational experiences are carried out on problems where the constraints are inequalities on polynomials. The solution of the original problem is equivalent with the solution of a sequence of set packing problems with special constraint sets. The solution of these set packing problems is equivalent with the ordering of the binary vectors according to their objective function value. An algorithm is developed to generate this order in a dynamic way. The main tool of the algorithm is a tree which represents the desired order of the generated binary vectors. The method can be applied to the multi-knapsack type nonlinear 0–1 programming problem. Large problems of this type up to 500 variables have been solved.     

Chemical profile by LC–MS/MS,GC/MS and antioxidant activities of the essential oils and crude extracts of two Euphorbia species

In this study, it was aimed to investigate the chemical composition and antioxidant activities of two Euphorbia species. The major component of the fatty acid compositions obtained from the petroleum ether extracts was identified as palmitic acid for Euphorbia gaillardotii and Euphorbia macroclada. The main constituents of the essential oils were identified as arachidic acid for E. gaillardotii and tetratetracontane for E. macroclada. Among the 27 studied compounds, hesperidin, rutin, hyperoside and quinic, malic, gallic and tannic acids were found to be the most abundant compounds in the two Euphorbia species. The methanol extracts of E. gaillardotii and E. macroclada showed strong antioxidant activity in all tested methods. Particularly, IC₅₀ values of E. macroclada methanol extract that was the richest in terms of total phenolic-flavonoid contents were found to be lower than α-tocopherol and butylated hydroxytoluene in β-carotene bleaching, 2,2-diphenyl-1-picrylhydrazyl free and ABTS cation radical scavenging methods.     

Effects of timber skidding on chemical characteristics of herbaceous cover, forest floor and topsoil on skidroad in an oak (Quercus petrea L.) forest

This paper examines the effects of timber harvesting by skidding on some soil properties (sand, silt, clay, pH, organic carbon, bulk density and compaction), herbaceous cover (unit mass) and forest floor (unit weight) properties. Also N (%), P, K, Na, Ca, Mg, Fe, Zn, Cu and Mn (ppm) were determined in all herbaceous cover, forest floor and two soil depth (0–5 cm and 5–10 cm) on skidroad of an oak (Quercus petrea L.) stand in Istanbul Belgrad Forest – Turkey. In this study, obtained results are; the forest floor and the herbaceous cover amount on the skidroad have been found considerably lower than undisturbed area. There were some crucial changes in the characteristics of the soil which has been investigated down to 10 cm depth. Soil bulk density was found quite high in the samples taken from the skidroad subject to compaction compared to the ones on the undisturbed area. Nevertheless, no important difference had been detected between the skidroad and the undisturbed area at both soil depths in terms of organic carbon contents. Moreover, the soil acidity (pH) values showed noteworthy differences in the analysis of soil samples taken from both soil depths on the skidroad and on the undisturbed area. Fe and Cu contents of herbaceous samples on skidroad were significantly higher than undisturbed area. Forest floor on skidroad had significantly higher K content, and significantly lower Zn, Mn and N content compared to undisturbed area. P, Fe, Zn and Mn contents were found significantly lower in 0–5 cm soil depth on skidroad than undisturbed area. In 5–10 cm soil depth, concentrations of N, P, Fe, Zn and Mn were significantly lower, while Mg and Cu contents were significantly higher than undisturbed area. Results indicate that long-term harvest using skidding techniques on these sites had adversely affected soil cation concentrations, physical soil conditions and mass of herbaceous cover and forest floor.     

Synthesis and fluorescence sensing properties of novel pyrene-armed calix[4]arene derivatives

Fluorogenic tert-butylcalix[4]arenes bearing two pyrene pendant groups at the lower rim were synthesized. Based on ratiometric changes of monomer and excimer emissions, the pyrene amine derivative of calix[4]arene has been found to act as a selective sensor for Pb²⁺ and Cu²⁺ ions, respectively, due to a conformational change upon chelation of these ions.     

Synthesis,molecular conformation,vibrational, electronic transition,and chemical shift assignments of 4-(thiophene-3-ylmethoxy)phthalonitrile: a combined experimental and theoretical analysis

This work presents the synthesis and characterization of a novel compound, 4-(thiophene-3-ylmethoxy)phthalonitrile (TMP). The spectroscopic properties of the compound were examined by FT-IR, FT-Raman, NMR, and UV techniques. FT-IR and FT-Raman spectra in solid state were observed in the region 4000–400 cm⁻¹ and 3500–50 cm⁻¹, respectively. The ¹H and ¹³C NMR spectra were recorded in CDCl₃ solution. The UV absorption spectrum of the compound that dissolved in THF was recorded in the range of 200–800 nm. The structural and spectroscopic data of the molecule in the ground state were calculated using density functional theory (DFT) employing B3LYP exchange correlation and the 6-311++G(d,p) basis set. The vibrational wavenumbers were calculated and scaled values were compared with experimental FT-IR and FT-Raman spectra. The complete assignments were performed on the basis of the experimental results and total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. Isotropic chemical shifts (¹³C NMR and ¹H NMR) were calculated using the gauge-invariant atomic orbital (GIAO) method. A study on the electronic properties, such as HOMO and LUMO energies, were performed by time-dependent DFT (TD-DFT) approach. The HOMO and LUMO analyses have been used to elucidate information regarding charge transfer within the molecule. Comparison of the calculated frequencies, NMR chemical shifts, absorption wavelengths with the experimental values revealed that DFT method produces good results.     

Bidual of <Emphasis Type="Italic">r</Emphasis>-algebras

We prove that the order continuous bidual of an Archimedean r-algebra is a Dedekind complete r-algebra with respect to the Arens multiplications.     

Genocchi polynomials associated with the Umbral algebra

The aim of this paper is to study on the Genocchi polynomials of higher order on P, the algebra of polynomials in the single variable x over the field C of characteristic zero and P^∗, the vector spaces of all linear functional on P. By using the action of a linear functional L on a polynomial p(x) Sheffer sequences and Appell sequences, we obtain some fundamental properties of the Genocchi polynomials. Furthermore, we give relations between, the first and second kind Stirling numbers, Euler polynomials of higher order and Genocchi polynomials of higher order.     

Selective extraction of triazine herbicides based on a combination of membrane assisted solvent extraction and molecularly imprinted solid phase extraction

A selective extraction technique based on the combination of membrane assisted solvent extraction and molecularly imprinted solid phase extraction for triazine herbicides in food samples was developed. Simazine, atrazine, prometon, terbumeton, terbuthylazine and prometryn were extracted from aqueous food samples into a hydrophobic polypropylene membrane bag containing 1000μL of toluene as the acceptor phase along with 100mg of MIP particles. In the acceptor phase, the compounds were re-extracted onto MIP particles. The extraction technique was optimised for the type of organic acceptor solvent, amount of molecularly imprinted polymers particles in the organic acceptor phase, extraction time and addition of salt. Toluene as the acceptor phase was found to give higher triazine binding onto MIP particles compared to hexane and cyclohexane. Extraction time of 120min and 100mg of MIP were found to be optimum parameters. Addition of salt increased the extraction efficiency for more polar triazines. The selectivity of the technique was demonstrated by extracting spiked cow pea and corn extracts where clean chromatograms were obtained compared to only membrane assisted solvent extraction or only molecularly imprinted solid phase extraction. The study revealed that this combination may be a simple way of selectively extracting compounds in complex samples.