Study of DNA coated nanoparticles as possible programmable self-assembly building blocks

Nanoparticles coated with single stranded DNA have been shown to efficiently hybridize to targets of complementary DNA. This property might be used to implement programmable (or algorithmic) self-assembly to build nanoparticle structures. However, we argue that a DNA coated nanoparticle by itself cannot be used as a programmable self-assembly building block since it does not have directed bonds. A general scheme for assembling and purifying nanoparticle eight-mers with eight geometrically well-directed bonds is presented together with some preliminary experimental work.     

含余割核奇异积分修改的反演问题

针对含余害核奇异积分反演问题在指κ＜0时一般无解的情况，本文提出并求解两种修改的反演问题，而后一种修改反演问题的提法与此前类似问题颇不相同，由于运用了推广的留数定理和Bertrand型换序公式使本问题及类似问题解法得以简化。     

Phase-Locked Fibre Array for Coherent Combination and Atmosphere Aberration Compensation

We report a fibre amplifier array that not only achieves coherent beam combination by compensation of phase noises of fibre amplifier, but also accomplishes correction of atmosphere aberration. It is of master-oscillatormultiple-amplifier （MOPA） configuration, which can be phase-locked by the multidither principle or heterodyne detection principle. First laboratory experiments of atmosphere aberration compensation of a three-element fibre amplifier array are reported. The atmosphere aberration is created by a phase screen in the experiment. The phase changes of the beam, which are introduced by the fibre amplifier and the phase screen, are both detected by the heterodyne detection method. Phase modulators are controlled to compensate for the phase in the three paths. No matter whether there is a phase screen producing atmosphere aberration or not, the dim dynamic interference fringes in the far field turn to a clear and stable pattern, and the peak intensity is maximized. It is indicated that the fibre amplifier array is phase-locked, and coherent combination of the three beams is achieved. It can be used not only to obtain high power fibre laser array but also in laser space communication.     

Chemoselective Catalytic Hydrogenation of α,β-Unsaturated Ketones and α,β-Unsaturated Carboxylic Esters

ＣｈｅｍｏｓｅｌｅｃｔｉｖｅＣａｔａｌｙｔｉｃＨｙｄｒｏｇｅｎａｔｉｏｎｏｆα，β┐ＵｎｓａｔｕｒａｔｅｄＫｅｔｏｎｅｓａｎｄα，β┐ＵｎｓａｔｕｒａｔｅｄＣａｒｂｏｘｙｌｉｃＥｓｔｅｒｓＺＨＡＮＧＪｉｎｇ－ｗｅｎ＊，ＺＨＡＯＪｉａｎ－ｚｈａｎｇ，Ｚ...     

The Micro-Theory of Ultra-Short Pulse Propagating in Nonlinear Fiber

The modified quantum nonlinear Schrodinger equation of ultra-short pulse propagating in fiber is derived using dispersion relation and the Hamiltonian of the transmission system. The derived equation is solved with linearization approximation, and modulation instability is analyzed. The equation is also solved with Hartree approximation. The results indicate that pulse power, loss and self-steeping effect change the critical frequency, the maximum gain and the gain spectrum range, but the third order dispersion has no effect on modulation instability. The expectation value of optical field is average of a set of modified classical solitons, and higher order terms change the amplitude, pulse position and phase of soliton.     

对薄层柱壳爆炸膨胀断裂过程的研究

 本文提出了一个用于描述动态破坏发展过程的损伤度函数。从这个损伤度函数出发,把材料特征性方程取为强化粘塑性本构方程形式,导出了薄层柱壳爆炸膨胀运动在两种近似下（恒定膨胀速度近似合恒定应变速率近似）断裂判据的解析表达式。结果分析表明,在上述条件下,存在着一个动态断裂“塑性峰”,在这个峰值条件的应变率下,柱壳出现贯穿断裂时刻的应变最大。以软钢为算例,本断裂判据可以比较好地解释Иванов和陈大年等给出的实验结果。这时,动态断裂“塑性峰”对应的应变率为4×10⁴ s^-1,相应的应变约为60%~80%。     

氯离子柱撑水滑石共沉淀法合成反应动力学

根据氯离子型层状复合氢氧化物(LDH-Cl)制备过程中溶液浓度变化的监测结果和不同反应进程时产物的EDS、IR、XRD、TEM、TG-DTA表征结果,研究了合成LDH-Cl的共沉淀反应动力学特征及机理.实验结果表明, LDH-Cl的生成符合多核层表面反应动力学模型;反应过程中LDH的晶胞参数c从2.421 nm变为2.399 nm,通道高度h由0.3321 nm减小为0.3228 nm,粒子直径Da由6.40 nm增大为15.16 nm, Dc由7.43 nm增大到10.93 nm,纵横比由0.86增大为1.39; IR和TG-DTA特征变化表明了层板对阴离子作用的强度和层板的结构稳定性随反应进程而提高.     

毛细管电泳紫外检测法测定莲须中的槲皮素、木犀草素、山萘酚、异槲皮甙

采用毛细管区带电泳紫外检测法(CZE-UV)同时测定中药莲须中槲皮素、木犀草素、山萘酚、异槲皮甙4种有效成分.研究了缓冲溶液的离子浓度、pH值和电压对分离度和迁移时间的影响,得到了最佳分离实验条件.在离子浓度为40 mmol/L Na2B4O7缓冲溶液(pH 9.0)中,分离电压为16 kV,波长为254 nm时,槲皮素、木犀草素、山萘酚、异槲皮甙4种物质在10 min内得到了良好的分离测定,其检出限分别为5.0、6.7、4.5和6.0 mg/L.本方法应用于实际样品的测定,结果令人满意.     

聚乙烯单晶的退火效应

用混合晶红外光谱法和ＳＡＸＳ、ＤＳＣ和ＬＡＭ等方法研究了聚乙烯单晶在７５℃、９０℃和１０５℃退火前后的结构变化，发现在９０℃以下和１０５℃以上退火，遵循不同的退火机制