Determination of partition coefficient and analysis of nitrophenols by three‐phase liquid‐phase microextraction coupled with capillary electrophoresis

A three‐phase hollow fiber liquid‐phase microextraction method coupled with CE was developed and used for the determination of partition coefficients and analysis of selected nitrophenols in water samples. The selected nitrophenols were extracted from 14 mL of aqueous solution (donor solution) with the pH adjusted to pH 3 into an organic phase (1‐octanol) immobilized in the pores of the hollow fiber and finally backextracted into 40.0 μL of the acceptor phase (NaOH) at pH 12.0 located inside the lumen of the hollow fiber. The extractions were carried out under the following optimum conditions: donor solution, 0.05 M H₃PO₄, pH 3.0; organic solvent, 1‐octanol; acceptor solution, 40 μL of 0.1 M NaOH, pH 12.0; agitation rate, 1050 rpm; extraction time, 15 min. Under optimized conditions, the calibration curves for the analytes were linear in the range of 0.05–0.30 mg/L with r²>0.9900 and LODs were in the range of 0.01–0.04 mg/L with RSDs of 1.25–2.32%. Excellent enrichment factors of up to 398‐folds were obtained. It was found that the partition coefficient (K_a/d) values were high for 2‐nitrophenol, 3‐nitrophenol, 4‐nitrophenol, 2,4‐dinitrophenol and 2,6‐dinitrophenol and that the individual partition coefficients (K_org/d and K_a/org) promoted efficient simultaneous extraction from the donor through the organic phase and further into the acceptor phase. The developed method was successfully applied for the analysis of water samples.     

Two-step on-particle ionization/enrichment via a washing- and separation-free approach: multifunctional TiO2 nanoparticles as desalting, accelerating, and affinity probes for microwave-assisted tryptic digestion of phosphoproteins in ESI-MS and MALDI-MS: comparison with microscale TiO2

We introduce a simplified sample preparation method using bare TiO₂ nanoparticles (NPs) to serve as multifunctional nanoprobes (desalting, accelerating, and affinity probes) for effective enrichment of phosphopeptides from microwave-assisted tryptic digestion of phosphoproteins (α-casein, β-casein and milk) in Electrospray Ionization Mass Spectrometry (ESI-MS) and Matrix Assisted Laser Desorption Ionization Mass Spectrometry (MALDI-MS). The results demonstrate that TiO₂ NPs can effectively enrich and accelerate the digestion reactions of phosphoproteins in aqueous solutions and also from complex real samples. After the microwave experiments, we directly injected the resulting solutions into the ESI-MS and MALDI-MS systems for analysis, and excellent sensitivity was achieved without the need for any washing procedure or separation process. The reasons are attributed to the high binding affinity and selectivity of TiO₂ NPs toward phosphopeptides. Thus, phosphopeptides can be adsorbed onto the TiO₂ NP surface. The digested or partially digested phosphoproteins can be concentrated onto the TiO₂ NP surface. This results in the effective or complete digestion of phosphoproteins in a short period of time (45 s). In addition, high sensitivity and sequence coverage of phosphopeptide can be obtained using TiO₂ NPs as microwave absorbers and affinity probes in MALDI-MS and ESI-MS. This is due to the photocatalytic nature of the TiO₂ NPs because the absorption of microwave radiation that can accelerate the activation of trypsin for efficient digestion of phosphoproteins and enhances the ionization of phosphopeptides. The lowest concentrations detected for ESI-MS and MALDI-MS were 0.1 μM and 10 fmol, respectively, for α-casein. Comparing the two-step approach of TiO₂ NPs with microscale TiO₂ particles, the microscale TiO₂ particles shows no effect on the microwave-assisted tryptic digestion of phosphoproteins. The current approach offers multiple advantages, such as great simplicity, high sensitivity and selectivity, straightforward and separation/washing-free technique for phosphorpeptide enrichment analysis.     

Synthesis,physico-chemical and spectral investigations of novel homo-bimetallic mixed-ligand complexes: 57Fe Mössbauer parameters of [Fe2(imda)2(H2O)3Cl]

The newly prepared homo-bimetallic complexes [M₂(imda)₂(H₂O)₄], [M₂(imda)₂(Bipy)₂] (M = Co, Ni or Cu) and [Fe₂(imda)₂(H₂O)₃Cl] (H₂imda = iminodiacetic acid and Bipy = 2,2′-bipyridine) have been studied employing IR, FAB-mass, ¹H and ¹³C NMR, EPR and ligand field spectra, which indicated a high-spin state of metal ion with hexa-coordinate environment. ⁵⁷Fe Mössbauer data of the homo-bimetallic complex [Fe₂(imda)₂(H₂O)₃Cl] confirm a high-spin configuration with Fe (±3/2 → 1/2) nuclear transitions and the presence of Kramer's double degeneracy. At RT, the spin–spin interactions of the neighbouring nuclei (Fe³⁺–Fe³⁺ = S_5/2–S_5/2) are anti-ferromagnetically coupled. However, at LNT, the complex acquires a mixed-valent [Fe^III–Fe^II] composition corroborated from the X-band EPR data. CV studies indicated the presence of quasi-reversible redox Cu^II/I, Cu^II/III, Fe^III/II, Fe^III/I and Fe^II/I couples.     

Spectral and physico-chemical investigations of novel homo-dinuclear di-μ2-alkoxo bridged Schiff base complexes: 57Fe Mössbauer parameters of the Fe(III) complex

Spectral and molecular model computations on homo-dinuclear complexes [M₂L₂(H₂O)₂Cl₂] [L = 1-(salicylaldeneamino)-3-hydroxypropane, M = Cr³⁺, Mn³⁺, Fe³⁺, Co³⁺, Ni³⁺ or Cu³⁺] are consistent with a distorted hexa-coordinate geometry. X-band EPR spectral data indicated a rhombic distortion around Cu(II) ion. Magnetic moment and ⁵⁷Fe Mössbauer data confirmed a high-spin state electronic configuration (t_2g³e_g², S = 5/2) and asymmetric ligand environment around Fe(III) with nuclear transitions Fe(±3/2 → 1/2) exhibiting Kramer's double degeneracy. The neighboring Fe(III) nuclei in the homo-dinuclear species are antiferromagnetically coupled.     

Rapid and direct determination of glyphosate,glufosinate, and aminophosphonic acid by online preconcentration CE with contactless conductivity detection

Rapid and direct online preconcentration followed by CE with capacitively coupled contactless conductivity detection (CE‐C⁴D) is evaluated as a new approach for the determination of glyphosate, glufosinate (GLUF), and aminophosphonic acid (AMPA) in drinking water. Two online preconcentration techniques, namely large volume sample stacking without polarity switching and field‐enhanced sample injection, coupled with CE‐C⁴D were successfully developed and optimized. Under optimized conditions, LODs in the range of 0.01–0.1 μM (1.7–11.1 μg/L) and sensitivity enhancements of 48‐ to 53‐fold were achieved with the large volume sample stacking‐CE‐C⁴D method. By performing the field‐enhanced sample injection‐CE‐C⁴D procedure, excellent LODs down to 0.0005–0.02 μM (0.1–2.2 μg/L) as well as sensitivity enhancements of up to 245‐ to 1002‐fold were obtained. Both techniques showed satisfactory reproducibility with RSDs of peak height of better than 10%. The newly established approaches were successfully applied to the analysis of glyphosate, glufosinate, and aminophosphonic acid in spiked tap drinking water.     

Preparation of cellulose nanofibers with hydrophobic surface characteristics

The aim of this study was to develop cellulose nanofibers with hydrophobic surface characteristics using chemical modification. Kenaf fibers were modified using acetic anhydride and cellulose nanofibers were isolated from the acetylated kenaf using mechanical isolation methods. Fourier transform infrared spectroscopy (FTIR) indicated acetylation of the hydroxyl groups of cellulose. The study of the dispersion demonstrated that acetylated cellulose nanofibers formed stable, well-dispersed suspensions in both acetone and ethanol. The contact angle measurements showed that the surface characteristics of nanofibers were changed from hydrophilic to more hydrophobic when acetylated. The microscopy study showed that the acetylation caused a swelling of the kenaf fiber cell wall and that the diameters of isolated nanofibers were between 5 and 50 nm. X-ray analysis showed that the acetylation process reduced the crystallinity of the fibers, whereas mechanical isolation increased it. The method used provides a novel processing route for producing cellulose nanofibers with hydrophobic surfaces.     

Analysis of coir fiber acoustical characteristics

Coir fiber from coconut husk is an important agricultural waste in Malaysia. Acoustic absorption coefficient of the fiber as a porous material is studied in this paper. Two types of fiber are investigated, fresh from wet market and industrial prepared mixed with binder. Moreover two analytical models, namely; Delany–Bazley and Biot–Allard are used for analysis. Experimental measurements in impedance tube are conducted to validate the analytical outcomes. Results show that fresh coir fiber has an average absorption coefficient of 0.8 at f > 1360 Hz and 20 mm thickness. Increasing the thickness is improved the sound absorption in lower frequencies, having the same average at f > 578 Hz and 45 mm thickness. Delany–Bazley technique can be used for both types of fiber while Biot–Allard method is compensated for the industrial prepared fiber considering the binder additive. This form generally shows poor acoustical absorption in low frequencies. Inevitably, fiber has to be mixed with additives in commercial use to enhance its characteristics such as stiffness, unti-fungus and flammability. Hence other approaches such as adding air gap or perforated plate should be used to improve the acoustical properties of industrial treated coir fiber.     

Experimental investigation of long-wavelength optical lattice vibrations in quaternary AlxInyGa1−x−yN alloys and comparison with results from the pseudo-unit cell model

Raman and Fourier transform infrared (FTIR) spectroscopies have been utilized to measure long-wavelength optical lattice vibrations of high-quality quaternary Al_xIn_yGa_1−x−yN thin films at room temperature. The Al_xIn_yGa_1−x−yN films were grown on c-plane (0 0 0 1) sapphire substrates with AlN as buffer layers using plasma assisted molecular beam epitaxy (PA-MBE) technique with aluminum (Al) mole fraction x ranging from 0.0 to 0.2 and constant indium (In) mole fraction y=0.1. Pseudo unit cell (PUC) model was applied to investigate the phonons frequency, mode number, static dielectric constant, and high frequency dielectric constant of the Al_xIn_yGa_1−x−yN mixed crystals. The theoretical results were compared with the experimental results obtained from the quaternary samples by using Raman and FTIR spectroscopies. The experimental results indicated that the Al_xIn_yGa_1−x−yN alloy had two-mode behavior, which includes A₁(LO), E₁(TO), and E₂(H). Thus, these results are in agreement with the theoretical results of PUC model, which also revealed a two-mode behavior for the quaternary nitride. We also obtained new values of E₁(TO) and E₂(H) for the quaternary nitride samples that have not yet been reported in the literature.     

Effects of MnO<Subscript>2</Subscript> nano-particles on the conductivity of PMMA-PEO-LiClO<Subscript>4</Subscript>-EC polymer electrolytes

Li-ion rechargeable batteries based on polymer electrolytes are of great interest for solid state electrochemical devices nowadays. Many studies have been carried out to improve the ionic conductivity of polymer electrolytes, which include polymer blending, incorporating plasticizers and filler additives in the electrolyte systems. This paper describes the effects of incorporating nano-sized MnO₂ filler on the ionic conductivity enhancement of a plasticized polymer blend PMMA–PEO–LiClO₄–EC electrolyte system. The maximum conductivity achieved is within the range of 10⁻³ S cm⁻¹ by optimizing the composition of the polymers, salts, plasticizer, and filler. The temperature dependence of the polymer conductivity obeys the VTF relationship. DSC and XRD studies are carried out to clarify the complex formation between the polymers, salts, and plasticizer.     

Gas by-products of CF3I under AC partial discharge

This paper presents the decomposition by-products of trifluro-iodo-methane and their relative proportions in the gas phase under the occurrence of partial discharge. The experiment was performed in the presence of water vapor from 250 to 400 ppm under a non-uniform electric field configuration. The experimental results reveal that the by-products of C₂F₆, C₂F₄, C₂F₅I with the amount of 1300, 200, and 55 (CH₃I) ppm, respectively, were produced for a cumulative charge of 161 mC. Other by-products, such as C₃F₈, CHF₃, C₃F₆ CH₃I were obtained at less than 30 ppm C₂F₆ was the dominant gas by-product of trifluro-iodo-methane suffering partial discharge.