Ab initio Valence Bond Study on AB-type Molecules,A Description for XH(X=L,Be,B,C,N,O,F) and XF(X=Li,Be,B)

Ab initio valence bond method is employed to quantitatively study the concepts of ionic resonance energy and ionicity of a chemical bond in the cases of hydrides XH(X=Li,Be,B,C,N,O,F) and fluorides XF(X=Li,Be,B),By establishing the relationship between resonance and stability,and comparing the calculated ionicities with Pauling‘s earlier estimations in the above diatomic molecules,the merits of Pauling‘s classical resonance theory were demonstrated at the ab initio level.     

Selective synthesis and characterization of single-crystal silver molybdate/tungstate nanowires by a hydrothermal process

Selective synthesis of uniform single crystalline silver molybdate/tungstate nanorods/nanowires in large scale can be easily realized by a facile hydrothermal recrystallization technique. The synthesis is strongly dependent on the pH conditions, temperature, and reaction time. The phase transformation was examined in details. Pure Ag(2)MoO(4) and Ag(6)Mo(10)O(33) can be easily obtained under neutral condition and pH 2, respectively, whereas other mixed phases of Mo(17)O(47), Ag(2)Mo(2)O(7,) Ag(6)Mo(10)O(33) were observed under different pH conditions. Ag(6)Mo(10)O(33) nanowires with uniform diameter 50-60 nm and length up to several hundred micrometers were synthesized in large scale for the first time at 140 degrees C. The melting point of Ag(6)Mo(10)O(33) nanowires were found to be about 238 degrees C. Similarly, Ag(2)WO(4), and Ag(2)W(2)O(7) nanorods/nanowires can be selectively synthesized by controlling pH value. The results demonstrated that this route could be a potential mild way to selectively synthesize various molybdate nanowires with various phases in large scale.     

Electron scattering on C6F6 and SF6 molecules

Total absolute cross sections for electron scattering on hexafluorobenzene, C₆F₆, and sulfur hexafluoride, SF₆, molecules, have been measured as a function of impact energy from 0.6 to 250 eV. The total cross section for C₆F₆ exhibits a very broad peak stretching from 10 to 100 eV with some weak features near 9.5 and 15 eV superimposed on the peak. Apart from the well-known low-energy resonant structures in the SF6 total cross section function, a new weak resonant feature close to 25 eV has been noticed in the present experiment, in accordance with earlier theoretical calculations.     

RAMPED-UP NMR: multiplexed NMR-based screening for drug discovery

The crucial step in drug discovery is the identification of a lead compound from a vast chemical library by any number of screening techniques. NMR-based screening has the advantage of directly detecting binding of a compound to the target. The spectra resulting from these screens can also be very complex and difficult to analyze, making this an inefficient process. We present here a method, RAMPED-UP NMR, (Rapid Analysis and Multiplexing of Experimentally Discriminated Uniquely Labeled Proteins using NMR) which generates simple spectra which are easy to interpret and allows several proteins to be screened simultaneously. In this method, the proteins to be screened are uniquely labeled with one amino acid type. There are several benefits derived from this unique labeling strategy: the spectra are greatly simplified, resonances that are most likely to be affected by binding are the only ones observed, and peaks that yield little or no information upon binding are eliminated, allowing the analysis of multiple proteins easily and simultaneously. We demonstrate the ability of three different proteins to be analyzed simultaneously for binding to two different ligands. This method will have significant impact in the use of NMR spectroscopy for both the lead generation and lead optimization phases of drug discovery by its ability to increase screening throughput and the ability to examine selectivity. To the best of our knowledge, this is the first time in any format that multiple proteins can be screened in one tube.     

PEO／EVA共混物的结构研究

ＰＥＯ以分散相形式存在于ＰＥＯ／ＥＶＡ共混物中，且具有部分相容性。Ｘ－射线衍射谱表明ＥＶＡ含有较强的ＰＥ衍射峰；ＰＥＯ／ＥＶＡ共混物既表现出ＰＥ的衍射峰也含有ＰＥＯ的晶面反射。随着ＰＥＯ的Ｍｎ的增加，ＰＥＯ／ＥＶＡ的Ｗｃ、ｘ增大且于时获得最大值：ＰＥ０／ＥＶＡ的Ｗｃ、ｘ值比纯ＰＥＯ的Ｗｃ、ｘ明显降低。     

聚合物微晶尺寸和晶格畸变

聚合物微晶尺寸和晶格畸变是对聚合物材料性能有着重要影响的结构参数。本文介绍了应用Ｘ射线衍射方法测定聚合物微晶尺寸和结构畸变的几种方法：近似函数、次晶模型法、方差法、矩法。     

PEO／PVP共混体系结晶行为

本文用WAXD、PLM、DSC方法研究了聚氧化乙烯(PEO)/聚乙烯基吡咯烷酮(PVP)共混体系的结晶行为,探索了两组分聚合物间相互作用及体系结晶度与非晶组分含量的关系。DSC研究表明PEO/PVP共混体系具有两个玻璃化转变温度,分别是纯组分的T_g,无相容性。应用Avrami和LH方程对其动力学参数进行了研究。偏光显微镜观察了共混物结构形态。     

DETERMINATION OF DEGREE OF CRYSTALLINITY OF NYLON 1212 BY WIDE-ANGLE X-RAY DIFFRACTION

Based on the X-ray scattering intensity theory and using the approximate expression for the atomic scattering factor, the correction factors for three crystalline peaks and an amorphous peak of Nylon 1212 were calculated and the formula of degree of crystallinity of Nylon 1212 was derived by a graphic multipeak resolution method. The degree of crystallinity calculated from the WAXD method is compatible with those obtained by density and calorimetry methods.     

热处理对Nylon—11结构的影响

对不同温度热处理过的Nylon－11样品，采用广角X射线衍射（WAXD），根据X射线衍射强度理论，用多重峰图解分峰方法研究了Nylon－11结构的变化，并导出了计算Nylon－11结晶度的公式．所得结果与密度法、DSC法进行了比较．同时也给出了Nylon－11的有关热力学参数，     

用WAXD和SAXS研究辐照聚酰胺1010结构

用ＷＡＸＤ和ＳＡＸＳ方法研究了聚酰胺１０１０的聚集态结构和结晶结构的辐射损伤过程和机理。辐射交联与裂解主要在非晶区和结晶表面或中间相发生；辐射损伤并从这里开始，随辐射剂量增大，非晶化逐渐向晶区伸展，有氢键的（０１０）晶面损伤几率高于（１００）晶面；辐射后效应导致新的交联与裂解生成，主要影响（０１０）晶面的形成与完善，使Ｌ１００及Ｗｃ变小。