Specific recognition of syndiotactic poly(methacrylic acid) in porous isotactic poly(methyl methacrylate) thin films based on the effects of stereoregularity,temperature, and solvent

The effects of stereoregularity, temperature, and solvent on the specific recognition of syndiotactic (st)‐poly(methacrylic acid) (PMAA) in macromolecularly porous isotactic (it)‐poly(methyl methacrylate) films were investigated to give important insights into the regularity and stability of nanospaces in the it‐PMMA films as well as template polymerization. The porous it‐PMMA films were fabricated on quartz crystal microbalance (QCM) substrates via the layer‐by‐layer (LbL) assembly of it‐PMMA/st‐PMAA, plus the st‐PMAA extraction from the assembly. QCM analysis and infrared spectroscopy revealed the first case of stereocomplex formation using st‐PMAA with lower stereoregularity (rr = 73%) in the LbL films, while st‐PMAA obtained with conventional free radical polymerization (rr = 62%) was barely incorporated into the porous it‐PMMA films. The maximum st‐PMAA incorporation increased from 25 to 40 °C, but there were almost no difference between 40 and 55 °C, indicating that the it‐PMMA crystallization would also be accelerated with increasing temperature. The studies on st‐PMAA incorporation with various complexing solvents revealed that the host it‐PMMA in the porous films could only form the original stereocomplex with 2/1 unit‐molar stoichiometry (st‐PMAA/it‐PMMA) in acetonitrile/water or ethanol/water. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3651–3657, 2010     

Direct patterning of poly(amic acid) and low‐temperature imidization using a crosslinker,a photoacid generator,and a thermobase generator

A positive‐type photosensitive polyimide (PSPI) based on poly(amic acid) (PAA), a crosslinker 1,1,1‐tris{4‐[2‐(vinyloxy)ethoxy]phenyl}ethane (TVPE), a photoacid generator (PAG) (5‐propylsulfonyloxyimino‐5H‐thiophen‐2‐ylidene)‐2‐(methylphenyl)acetonitrile (PTMA), and a thermobase generator (TBG) t‐butyl 2,6‐dimethylpiperidine‐1‐carboxylate (BDPC) has been developed as a promising material in microelectronics. The PAA was prepared from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 4,4′‐oxydianiline (ODA) in dimethyl sulfoxide (DMSO). The PSPI, consisting of PAA (69 wt %), TPVE (21 wt %), PTMA (3 wt %), and BDPC (7 wt %), showed high sensitivity of 21 mJ/cm² and a high contrast of 6.8 when it was exposed to a 436‐nm line (g‐line), postbaked at 90 °C for 5 min, and developed with 1.69 wt % TMAHaq. A clear positive image of 8 μm line and space pattern was printed on film, which was exposed to 50 mJ/cm² of g‐line by a contact printing mode and fully converted to the corresponding polyimide (PI) pattern on heating at 200 °C, confirmed by FTIR spectroscopy. Thus, this system will be a good candidate for next generation PSPIs. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3362–3369, 2009     

Application of WET sequence for the detection of the ligand signals resonating close to water

An efficient pulse sequence for observing the ligand signals resonating close to the water signal has been developed by incorporating the WET technique into the saturation transfer difference pulse sequence. Although several pulse sequences have been developed for observing a ligand binding with a protein receptor, the ligand signals resonating close to the water were undetectable owing to the interference of the huge water signal in the samples containing 95% ¹H₂O. On the point of sample preparation, it is preferable to avoid the solvent exchange in the protein samples. In the proposed pulse sequence, a WET sequence is incorporated for the selective suppression of the water resonance. The efficient water suppression and the clear observation of the bound ligand signals close to the water have been demonstrated using the lysozyme‐glucose complex. Copyright © 2009 John Wiley & Sons, Ltd.     

Negative‐type photosensitive poly(phenylene ether) based on poly(2,6‐dimethyl‐1,4‐phenylene ether), a crosslinker,and a photoacid generator

A negative‐type photosensitive poly(phenylene ether) (PSPPE) based on poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE), a novel crosslinker 4,4′‐methylene‐bis [2,6‐bis(methoxymethyl)phenol] (MBMP) having good compatibility with PPE, and diphenylidonium 9,10‐dimethoxy anthracene‐2‐sulfonate (DIAS) as a photoacid generator (PAG) has been developed. This resist consisting of PPE (73 wt %), MBMP (20 wt %) and DIAS (7 wt %) showed a high sensitivity (D_0.5) of 58 mJ/cm² and a contrast (γ_0.5) of 9.5 when it was exposed to i‐line (365 nm wavelength light), postexposure baked at 145 °C for 10 min, and developed with toluene at 25 °C. A fine negative image featuring 6 μm line‐and‐space pattern was obtained on the film exposed to 300 mJ/cm² of i‐line by a contact‐printed mode. The resulting polymer film cured at 300 °C for 1 h under nitrogen had a low dielectric constant (ε = 2.46) comparable to that of PPE and a higher T_g than that of PPE. In addition, the cured PSPPE film was pretty low water absorption (<0.05%) as same as PPE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4949–4958, 2008     

Complexity of Body Movements during Sleep in Children with Autism Spectrum Disorder

Recently, measuring the complexity of body movements during sleep has been proven as an objective biomarker of various psychiatric disorders. Although sleep problems are common in children with autism spectrum disorder (ASD) and might exacerbate ASD symptoms, their objectivity as a biomarker remains to be established. Therefore, details of body movement complexity during sleep as estimated by actigraphy were investigated in typically developing (TD) children and in children with ASD. Several complexity analyses were applied to raw and thresholded data of actigraphy from 17 TD children and 17 children with ASD. Determinism, irregularity and unpredictability, and long-range temporal correlation were examined respectively using the false nearest neighbor (FNN) algorithm, information-theoretic analyses, and detrended fluctuation analysis (DFA). Although the FNN algorithm did not reveal determinism in body movements, surrogate analyses identified the influence of nonlinear processes on the irregularity and long-range temporal correlation of body movements. Additionally, the irregularity and unpredictability of body movements measured by expanded sample entropy were significantly lower in ASD than in TD children up to two hours after sleep onset and at approximately six hours after sleep onset. This difference was found especially for the high-irregularity period. Through this study, we characterized details of the complexity of body movements during sleep and demonstrated the group difference of body movement complexity across TD children and children with ASD. Complexity analyses of body movements during sleep have provided valuable insights into sleep profiles. Body movement complexity might be useful as a biomarker for ASD.     

Noise analysis of an electro-optic sensor system

Optical Review - This paper describes the noise analysis of an electro-optic (EO) sensor system based on experimental and simulation results. We developed a polarization simulator of the EO sensor...     

Spectral variations in background light emission of surface-enhanced resonance hyper Raman scattering coupled with plasma resonance of individual silver nanoaggregates

We demonstrate the origin of spectral variations in background light emission of surface enhanced resonance hyper Raman scattering (SERHRS) from single Ag nanoaggregates. Ag nanoaggregate-by-nanoaggregate variations in background light emission spectra are related to plasma (plasmon) resonance spectra. Temporal variations in background light emission spectra with temporal blueshifts in plasma resonance spectra are also observed under continuous laser excitation. Both types of the variations in background light emission are reproduced by multiplying background light emission spectra measured from a Ag microaggregate by Lorentz function spectra derived from plasma resonance spectra. The reproduction reveals that second electromagnetic (EM) enhancement by plasma resonance is the origin of the variations. Additionally, spectral variations in background light emission of SERHRS are similar to that of surface enhanced resonance Raman scattering (SERRS). The similarity indicates that both types of background light emission commonly obtain second EM enhancement from identical plasma resonance.