Microstructure and wear properties of laser clad Cuss/Cr5Si3 metal silicide composite coatings

Wear resistant Cu-based solid solution (Cu_ss) toughened Cr₅Si₃ metal silicide composite coatings were fabricated on austenitic stainless steel AISI321 by laser cladding process. Due to the rapidly solidified microstructural characteristics and the excellent toughening effect of Cu_ss on Cr₅Si₃, the Cu_ss/Cr₅Si₃ coatings have outstanding wear resistance and low coefficient of friction under room temperature dry sliding wear test conditions coupling with hardened 0.45% C steel.     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

基于单通道反射型电光调制器实现不同路光同时调制的方法

提出了一种利用单通道反射型聚合物电光调制器同时调制不同路光的方法。衰减全反射结构的电光调制器,其每一个衰减全反射(ATR)峰的位置分别对应于一个导波共振模式。实验系统中利用衰减全反射导膜峰作为调制通道,使其每一路光路的入射角分别对应于不同导波共振模式的工作角,就可以实现利用单通道的电光调制器同时调制不同路光。提出了三种实现两路光同时调制的模式,并给出了三种模式的调制结果。结果表明,作为调制通道的导模阶数越低,调制效率越高。在832 nm光波波长下,采用最低阶导模进行调制时可以获得42.9%的调制效率。     

Novel photoswitching dithienylethenes with ferrocene units

Two novel dithienylethenes with ferrocene units were synthesized by Wittig reaction. The structure of 2a has been established by X‐ray diffraction studies. They could reversibly interconvert between two thermally stable forms, an open and a closed one, using light of different wavelengths as triggers. Copyright © 2006 John Wiley & Sons, Ltd.     

纳米晶Y_2SiO_5∶Eu的浓度猝灭研究

报道了分别用溶胶－凝胶法合成的Ｙ２ＳｉＯ５∶Ｅｕ纳米晶和用高温固相法合成常规尺度的Ｙ２ＳｉＯ５∶Ｅｕ材料的光致发光光谱和猝灭浓度的实验研究．结果表明：纳米Ｙ２－ｘＥｕｘＳｉＯ５比常规尺度的Ｙ２－ｘＥｕｘＳｉＯ５有更高的猝灭浓度和更高的发光亮度．理论分析认为这是由于在纳米材料中能量共振传递被阻断和猝灭中心在各个纳米晶内分布的涨落造成的．这个结果为高亮度的Ｙ２ＳｉＯ５∶Ｅｕ纳米材料的实际开发应用展示了广阔前景．     

聚合物电致发光材料研究进展

本文较详细地综述了聚合物电致发光材料的研究进展，重点介绍了聚对苯撑乙烯（ＰＰＶ），并提出了有关聚合物电致发光材料及器件构造研究的一些观点。     

天然气和氧偶联制环氧乙烷催化剂的反应性能

研制了天然气和氧经偶联反应制环氧乙烷的Ａｇ－Ｂａ－Ｃｓ／Ａｌ２Ｏ３催化剂（ＮＥＯ－１）。用Ｎ２＋Ｏ２＋Ｃ２Ｈ４和偶联产物气加氧作原料气，在２５０℃，空速２５００ｈ＾－１时，乙烯转化率和ＥＯ选择性分别达到了３０％和８０％，ＮＥＯ－１催化具有适宜的比表面和孔结构，用ＸＰＳ分析发现，与新鲜的催化相比，经活化和反应后的催化剂表面的Ｂａ，Ｃｓ原子浓度增高，并具有较多的吸附氧物种。     

X荧光滤纸片薄样法测定铅锌矿选矿流程样中Pb,Zn,Cu,Fe

本法将Ｘ荧光滤纸片薄样法用于具有复杂组分的铅锌矿选矿样品中Ｐｂ，Ｚｎ，Ｃｕ，Ｆｅ的分析，样品经化学溶样后滴于定量滤纸片上，标准样品可直接用纯试剂人工配制，用同样制成滤纸片薄样标准系列，因薄样测定可不作基体效应校正，标样使用数量少，又无需化学法标定。故方法实验周期短，样品测定手续简便快速，元素分析含量适应范围宽，可适用于组分复杂，元素含量变化范围大的试样分析，样品分析结果与化学法相符，方法准确度与精