Surface characterization and barrier properties of plasma‐modified polyethersulfone/layered silicate nanocomposites

This study describes the preparation of polyethersulfone (PES)/layered silicate nanocomposites (PLSNs) by mixing PES polymer chain into organically‐modified layered silicate in 1‐methyl‐2‐pyrrolidinone (NMP) solution. Both X‐ray diffraction data and transmission electron microscopy images of PLSNs indicate that the silicate layers were almost exfoliated and randomly distributed into the PES matrix. The mechanical and barrier properties of PLSNs show remarkable enhancement in the storage modulus and water/oxygen permeability when compared with that of neat PES matrix. Surfaces modification of PES and PLSN films with various treated times, system pressures, and radio frequency (RF) powers were performed using a mixture of oxygen (O₂) and nitrogen (N₂) plasmas. The topographical and physical properties of plasma‐modified PES and PLSN surfaces were investigated using scanning probe microscopy (SPM), contact‐angle measurements, and X‐ray photoelectron spectroscopy (XPS). These results indicate that the surface roughness of PLSNs with the same condition of plasma modification is lower than that of neat PES matrix and is probably due to the increase of stiffness with the presence of inorganic layered silicates in PES matrix. The surface properties of the PES and PLSNs are also changed from hydrophobic to hydrophilic. The XPS spectra suggest that the exposure of the PES and PLSNs to the plasmas led to the combination of etching reactions of polymer surface initiated by plasma and the following addition reactions of new oxygen‐ and nitrogen‐containing functional groups onto polymer surfaces to change their surface properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3185–3194, 2006     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

Characterization and electrical properties of polypyrrole/multiwalled carbon nanotube composites synthesized by in situ chemical oxidative polymerization

This study describes the preparation of polypyrrole (PPy)/multiwalled carbon nanotube (MWNT) composites by in situ chemical oxidative polymerization. Various ratios of MWNTs, which served as hard templates, were first dispersed in aqueous solutions with the surfactant cetyltrimethylammonium bromide to form micelle/MWNT templates and overcome the difficulty of MWNTs dispersing into insoluble solutions of pyrrole monomer, and PPy was then synthesized via in situ chemical oxidative polymerization on the surface of the templates. Raman spectroscopy, Fourier transform infrared (FTIR), field‐emission scanning electron microscopy (FESEM), and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the structure and morphology of the fabricated composites. Structural analysis using FESEM and HRTEM showed that the PPy/MWNT composites were core (MWNT)–shell (PPy) tubular structures. Raman and FTIR spectra of the composites were almost identical to those of PPy, supporting the idea that MWNTs served as the core in the formation of a coaxial nanostructure for the composites. The conductivities of these PPy/MWNT composites were about 150% higher than those of PPy without MWNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1413–1418, 2006     

Electrochemical characteristics of gatifloxacin and its interaction with DNA.

The electrochemical behavior of gatifloxacin (GTFX) and its interaction with natural calf thymus DNA (ctDNA) is investigated by differential pulse voltammetry (DPV) on a carbon paraffined electrode. According to the suggested electrochemical equation, a binding constant of 1.7058 x 10(5) (mol L(-1))(-1) and binding sizes s = 3.09 (base pairs) of GTFX with ctDNA are obtained by nonlinear fit analysis of electrochemical data. The results demonstrate that GTFX has the properties of an intercalative binder.     

Positive Steady States of a Prey-predator Model with Diffusion and Non-monotone Conversion Rate

In this paper, we study the positive steady states of a prey-predator model with diffusion throughout and a non-monotone conversion rate under the homogeneous Dirichlet boundary condition. We obtain some results of the existence and non-existence of positive steady states. The stability and uniqueness of positive steady states are also discussed.     

Geometric optimization andD P -completeness

In this paper we show a number of natural geometric optimization problems in the plane to becomplete for a classD ^P . The classD ^p contains both NP and Co-NP and is contained in ₂ ^P =P ^NP. Completeness inD ^p is exhibited under many-one and positive reductions. Further anOptP(O(logn)) result is also obtained for some of these optimization problems.Work on this paper by the first author was supported in part by NSF Grant No. MIP 85-21356 and ARO Contract No. DAAG29-85-C-0018 under Cornell/MSI. Work by the second author was supported in part by NSF Grant No. DCR 86-06366 at Ohio State and ONR Grant No. N00014-k-0045 at Harvard.On leave from Ohio State University.     

助剂改性活性炭担载Pt催化剂催化硝基苯加氢制对氨基苯酚

以改性活性炭担载的Pt为催化剂催化硝基苯经加氢重排一步合成对氨基苯酚，收率54．70％，选择性可达91.40%。     

Chiral Salen Manganese Complex Immobilized on SBA-15： A New Heterogenized Enantioselective Catalyst for the Epoxidation of Alkenes

Jacobsen‘s catalyst was immobilized onto SBA-15 by multi-step grafting, and this heterogenized catalyst exhibited comparable catalytic performance with the corresponding homogeneous counterpart for the epoxidation of alkenes, and the catalyst could be recycled effectively several times.     

新铜试剂—曙红Y萃取光度法测定微量铜

铜(I)-新铜试剂(NCP)-曙红Y(Eosin Y)能形成离子对三元络合物,其络合比为1:2:1。在氯仿中该络合物的λ_(max)=544nm,表观摩尔吸光系数ε=6.83×10~4 L mol~(-1)cm~(-1)。以柠檬酸盐作掩蔽剂,控制水相pH=4.5,相比(水相/氯仿)=2/1,可将络合物定量萃入氯仿中。一般常见的共存离子均不干扰测定,显色稳定性好,线性范围为0～5μg cu/5ml氯仿。方法灵救度高,选择性好。