Catalytic Adsorptive Stripping Voltammetry of Germanium(IV) in the Presence of Gallic Acid and Vanadium(IV)‐EDTA

A highly sensitive and selective catalytic adsorptive cathodic striping procedure for the determination of trace germanium is presented. The method is based on adsorptive accumulation of the Ge(IV)‐gallic acid (GA) complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species. The reduction current is enhanced catalytically by addition of vanadium(IV)‐EDTA. The optimal experimental conditions include the use of 0.03 mol/L HClO₄ (pH1.6), 6.0×10^?3 mol/L GA, 3.0×10^?3 mol/L V(IV), 4.0×10^?3 mol/L EDTA, an accumulation potential of ?0.10 V(vs. Ag/AgCl), an accumulation time of 120 s and a differential pulse potential scan mode. The peak current is proportional to the concentration of Ge(IV) over the range of 3.0×10^?11 to 1.0×10^?8 mol/L and the detection limit is 2×10^?11 mol/L for a 120 s adsorption time. The relative standard deviation at 5.0×10^?10 mol/L level is 3.1%. No serious interferences were found. The method was applied to the determination of germanium in ore, mineral water and vegetable samples with satisfactory results.     

A Study of Concentration Polarization on Ion Exchange Membrane Electrodialysis

The concentration polarization phenomena in ion exchange membrane electrodialysis have been studied with single exchange membrane cell. The limiting current densities of Asahi ion-permselective membranes CK-1 and CK-2, Selemion ion-exchange membranes CMV, AMV, DMV and ASV have been measured with Ag-AgCl reversible electrode in various electrolyte solutions under 25°C and constant flow rate. In sodium chloride solution, the cation exchange membrane is easier to occur concentration polarization than the anion exchange membrane. The limiting current density increases as the concentration of solution increases for the same kind of ion exchange membrane. The experimental limiting current densities of Selemion CMV and AMV in NaCl, KCl, MgCl₂, CaCl₂, BaCl₂, Na₂SO₄, NaOH and HCl aqueous solutions are measured. The results show that the limiting current density increases as the ion mobility and diffusivity increase, and is affected by the transference number of ion. For the mixture of electrolyte solution, there are linear relationship between limiting current density and equivalent fraction of electrolytes.     

Generalization of in-situ polymerization method for preparing core-shell polymeric nanospheres and hollow spheres

According to the new method of preparing core-shell nanospheres developed by our group, by using two monomers, 2-hydroxypropyl methacrylate(HPMA) and vinyl acetate(VAc), two kinds of core-shell nanospheres with poly(ɛ-caprolactone) (PCL) as the core and crosslinked poly(2-hydroxypropyl methacrylate) (PHPMA) or poly(vinyl acetate) (PVAc) as the shell were successfully prepared under similar conditions. After degrading the PCL cores of the two kinds of nanospheres by lipase, the corresponding crosslinked poly(methyl acrylic acid) hollow spheres and crosslinked poly(vinyl alcohol) hollow spheres were obtained. Results indicate that the new method we proposed for preparing core-shell polymeric nanospheres via in-situ polymerization can be generalized to a certain extent, and it is suitable for many systems provided the monomer used is soluble in water, while its corresponding polymer is insoluble in water. Translated from Chemical Journal of Chinese University, 2006, 27(9): 1762–1766 [译自: 高等学校化学学报]     

Aromatic poly(sulfone sulfide amide imide)s as new types of soluble thermally stable polymers

A new diamine monomer containing flexible sulfone, sulfide, and amide units was prepared via three steps. Nucleophilic chloro displacement reaction of 4‐aminothiophenol with 4‐nitrobenzoyl chloride in the presence of propylene oxide afforded N‐(4‐mercapto‐phenyl)‐4‐nitrobenzamide and subsequent reduction of the nitro intermediate led to 4‐amino‐N‐(4‐mercapto‐phenyl)benzamide. Two moles of this amino thiophenol compound was reacted with bis‐(4‐chloro phenyl)sulfone to provide a novel diamine monomer. The diamine was reacted with aromatic dianhydrides to form polyimides via a two‐step polycondensation method, formation of poly(amic acid)s, followed by chemical imidization. The resulting polymers were characterized and their physical properties including thermal behavior, thermal stability, solubility and inherent viscosity were studied. Copyright © 2007 John Wiley & Sons, Ltd.     

Rhodium-catalyzed CH activation/cyclization of enaminones with sulfoxonium ylides toward polysubstituted naphthalenes

A rhodium-catalyzed ortho-CH functionalization and annulation between enaminones and sulfoxonium ylides was developed, affording a series of multi-substituted naphthalenes in good to moderate yields with excellent functional group compatibility. The procedure featured with enaminone acting as both a directing and cyclization bifunctional group, and the application of sulfoxonium ylide in CH functionalization.     

A mechanistically guided design leads to the synthesis of an efficient and practical new reagent for the highly enantioselective,catalytic dihydroxylation of olefins

[structure: see text] The catalytic asymmetric dihydroxylation of olefins has been accomplished with high enantioselectivities using a proline-based catalyst. The pre-transition-state assembly for styrene is shown.     

Physicochemical and structural properties of bacteriostatic sulfonamides: Theoretical study

A theoretical study at the Hartree–Fock and density functional theory levels is performed on sulfonamide‐type bacteriostatic compounds with the aim to provide an insight into their structure–activity relationship. The basicity of the p‐amino group is analyzed by means of the proton affinities and the protonation energies, showing that molecules presenting bacteriostatic activity are less basic, i.e., they are characterized by larger protonation energies and smaller proton affinities. The acidity of the amide group is analyzed through the deprotonation energy. The results reveal that the more acidic molecules present a larger bacteriostatic activity. This result is also confirmed from a study of bond orders. A bond order analysis of the amide group suggests that the electron attracting group in these molecules is responsible for the increase in acidity. The charge of the SO₂ group is also shown to be affected by the presence of the electron attracting group and consequently related to the acidity of the molecules. A geometric analysis shows that structures in which the amino group is more coplanar with respect to the benzenic ring possess larger bacteriostatic activity. A conformational analysis of these molecules illustrates that active molecules have relatively larger torsion energy barriers. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 165–172, 2003     

极性非质子溶剂与甲醇或1,2-二氯乙烷的汽液平衡

使用双沸点仪测定了丙酮、乙酸乙酯、对二氧六环、乙腈或三乙胺与甲醇或1,2→二氯乙烷以及二者混合物等十一组二元体系在99.3 kPa下的汽液平衡数据(T,x,p), 计算了有关体系的过量吉布斯自由能。结果表明, 六种非质子溶剂与甲醇组成的二元系GE>0; 乙腈或三乙胺与1,2-二氯乙烷组成的二元系GE>0, 而丙酮、乙酸乙酯或对二氧六环与1,2-二氯乙烷的二元混合物GE<0。从同种分子间或不同种分子间的缔合作用对上述结果进行了讨论。本文还在固定极性非质子溶剂(第三组分)物质的量浓度的条件下, 测定了非质子溶剂+1,2-二氯乙烷+甲醇三元混合物的汽液平衡数据, 考察了非质子溶剂的加入对甲醇+1,2-二氯乙烷二元系GE的影响。     

四核钼簇合物的配体取代反应及产物Mo4S4(μ-OAc)2(dtp)4的晶体结构

标题化合物(Ⅰ)经由Mo₄S₄(μ-dtp)₄(Ⅱ)[dtp=S₂P(OEt)₂]和Ni(OAc)₂反应而得。(Ⅰ)晶体属单斜晶系,空间群P2/c,a=13.176(4),b=11.699(3),c=18.526(4)Å,β=116.11(3)°,V=2564(3)ų,Z     

氰戊菊酯立体异构体在手性键合相上的分析

本文介绍了采用高效液相色谱法在(R)-N-3,5-二硝基苯甲酰苯甘氨酸手性键合相上氰戊菊酯的四个立体异构体的分离,以外消旋氰戊菊酯样品为参照,计算了光学活性氰戊菊酯样品的四个立体异构体的百分含量,确定了在手性键合相上氰戊菊酯四个立体异构体构型的流出顺序为SR→RS→SS→RR。