微波吸收法研究Mn,Cu掺杂对ZnS:Mn,Cu光生载流子复合过程的影响

采用微波吸收法，测量了ZnS:Mn,Cu粉末材料受到超短脉冲激光激发后，其光生电子和浅束缚态电子的衰减过程.发现Mn,Cu的浓度对导带电子的寿命有明显的影响，提高掺杂浓度会使光生电子的寿命大大缩短，还研究了掺杂浓度对光致发光强度的影响. 关键词： 发光材料 硫化锌 光电子 微波吸收技术     

Writing Fiber Grating of Different Wavelength Using the Same Phase Mask

Chirped fiber grating was used in dispersion compensator. We tried to use the same phase mask to write fiber grating of different wavelength with two methods to reduce the price of the fiber grating.     

Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

A new regioselective synthesis and bioactivity of 1H‐pyrazolo[3,4‐d]pyrimidin‐4(5H)‐one derivatives

A series of new 1H‐pyrazolo[3,4‐d]pyrimidin‐4(5H)‐one Derivatives 5 has been designed and regio‐selectively synthesized via a tandem aza‐Wittig reaction. The structures of all compounds prepared have been confirmed by ¹H NMR, IR, EI‐MS spectroscopy and elemental analyses. The results of preliminary bioassay indicate that most compounds 5 possess an inhibition effect against Botrytis cinereapers and Pyricularia oryzae at the concentration of 50 mg/L.     

Release Behaviour of Shock Loaded LY12 Aluminium Alloy

By making use of a light gas gun, a specially designed target is impacted by the LY12 flyer, and the pressure is taken in the range of 0.6-3 GPa. Based on the stress profiles measured in the buffer materials by manganese gauges, the Hugoniot curve and release curves of LY12 aluminium alloy are obtained. Meanwhile, the release curves from different initial shocked states are described in both the pressure-particle velocity plane and the pressure-specific volume plane.     

Reactivities of tetraalkyltin complexes toward Pt/HY zeolite

Tetraalkyltin complexes, SnR₄ (R = Me, Et, Pr, Bu) could react with Pt/HY at 193, 243, 273 and 333 K, respectively. The reactions occurred on the surface of the zeolite and the organotin grafted zeolites were characterized in detail. The framework and the microporous structure of the grafted Pt/HY zeolites were retained. However, the modified zeolites showed better size selectivity in the absorption of hydrocarbons.     

Peritectic phase growth in directionally solidified Cu-70% Sn alloy

The growth mechanism of the peritectic η phase involving the peritectic reaction and peritectic transformation in Cu-70%Sn alloy was investigated under directional solidification. The results show that a major growth mechanism in thickening of the peritectic η-layer is not the peritectic reaction but the peritectic transformation. The transformation temperature and isothermal time play crucial roles in determining the volume fraction and the thickness of the peritectic η phase. With the increase of the temperature and isothermal time, the volume fraction of the peritectic η phase increases. The regressed data show that the relationship between the thickness of η phase (Δx) and the transformation temperature (T) meets the following equation In Δx=6.5−1673 1 / T. Additionally, there exists a relationship between the thickness of the η phase (Δx) and the isothermal time (t) at the 9 mm solidification distance below the peritectic reaction interface, Δx=0.72t ^1/2, which is consistent with the theoretical model. Supported by the National Science Foundation of China (Grant No. 50395102)     

Electrochemical behavior of Li intercalation processes into a Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 cathode

Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (X=0.17, 0.25, 0.33, 0.5) compounds are prepared by a simple combustion method. The Rietvelt analysis shows that these compounds could be classified as having the α-NaFeO₂ structure. The initial charge-discharge and irreversible capacity increases with the decrease of x in Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂. Indeed, Li[Ni_0.50Mn_0.50]O₂ compound shows relatively low initial discharge capacity of 200 mAh/g and large capacity loss during cycling, with Li[Ni_0.17Li_0.22Mn_0.61]O₂ and Li[Ni_0.25Li_0.17Mn₀.₅₈]O₂ compounds exhibit high initial discharge capacity over 245 mAh/g and stable cycle performance in the voltage range of 4.8 -2.0 V. On the other hand, XANES analysis shows that the oxidation state of Ni ion reversibly changes between Ni²⁺ and about Ni³⁺, while the oxidation state of Mn ion sustains Mn⁴⁺ during charge-discharge process. This result does not agree with the previously reported ‘electrochemistry model’ of Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂, in which Ni ion changes between Ni²⁺ and NI⁴⁺. Based on these results, we modified oxidation-state change of Mn and Ni ion during charge-discharge process.     

Rankin-Cohen brackets on pseudodifferential operators

Pseudodifferential operators that are invariant under the action of a discrete subgroup Γ of SL(2,R) correspond to certain sequences of modular forms for Γ. Rankin-Cohen brackets are noncommutative products of modular forms expressed in terms of derivatives of modular forms. We introduce an analog of the heat operator on the space of pseudodifferential operators and use this to construct bilinear operators on that space which may be considered as Rankin-Cohen brackets. We also discuss generalized Rankin-Cohen brackets on modular forms and use these to construct certain types of modular forms.     

一类递归集的Hausdorff维数及Bouligand维数

本文给出递归集的Ｈａｕｓｄｏｒｆｆ维数的下界估计，并由此确定了一类递归集的维数，所获结果包含并推广了Ｂｅｄｆｏｒｄ，Ｄｅｋｋｉｎｇ及文志英、钟红柳等人的有关结果。