Lifetime-based optical sensor for high-level pCO2 detection employing fluorescence resonance energy transfer

An optical sensor for the measurement of high levels of carbon dioxide in gas phase has been developed. It is based on fluorescence resonance energy transfer (FRET) between a long-lifetime ruthenium polypyridyl complex and the pH-active disazo dye Sudan III. The donor luminophore and the acceptor dye are both immobilised in a hydrophobic silica sol–gel/ethyl cellulose hybrid matrix material. Tetraoctylammonium hydroxide (TOA-OH) is used as an internal buffering system. Fluorescence lifetime is measured in the frequency domain, using low-cost phase modulation measurement technology. The use of Sudan III as an acceptor dye has enabled the sensor to have a dynamic range up to 100% carbon dioxide. The sensor displays 11.2° phase shift between the limit of detection (LOD) of 0.06 and 100% CO₂ with a resolution of better than 2%. The encapsulation in the silica/polymer hybrid material has provided the sensor with good mechanical and chemical stability. The effect of molecular oxygen, humidity and temperature on the sensor performance was studied in detail.     

Sol-gel based optical carbon dioxide sensor employing dual luminophore referencing for application in food packaging technology

An optical sensor for the measurement of carbon dioxide in Modified Atmosphere Packaging (MAP) applications has been developed. It is based on the fluorescent pH indicator 1-hydroxypyrene-3,6,8-trisulfonate (HPTS) immobilised in a hydrophobic organically modified silica (ormosil) matrix. Cetyltrimethylammonium hydroxide was used as an internal buffer system. Fluorescence is measured in the phase domain by means of the Dual Luminophore Referencing (DLR) sensing scheme which provides many of the advantages of lifetime-based fluorometric sensors and makes it compatible with established optical oxygen sensor technology. The long-term stability of the sensor membranes has been investigated. The sensor displays 13.5 degrees phase shift between 0 and 100% CO2 with a resolution of better than 1% and a limit of detection of 0.08%. Oxygen cross-sensitivity is minimised (0.6% quenching in air) by immobilising the reference luminophore in polymer nano-beads. Cross-sensitivity towards chloride and pH was found to be negligible. Temperature effects were studied, and a linear Arrhenius correlation between ln k and 1/T was found. The sensor is stable over a period of at least seven months and its output is in excellent agreement with a standard reference method for carbon dioxide analysis.     

The role of the active site tyrosine in the mechanism of lytic polysaccharide monooxygenase

Catalytic breakdown of polysaccharides can be achieved more efficiently by means of the enzymes lytic polysaccharide monooxygenases (LPMOs). However, the LPMO mechanism has remained controversial, preventing full exploitation of their potential. One of the controversies has centered around an active site tyrosine, present in most LPMO classes. Recent investigations have for the first time obtained direct (spectroscopic) evidence for the possibility of chemical modification of this tyrosine. However, the spectroscopic features obtained in the different investigations are remarkably different, with absorption maximum at 420 and 490 nm, respectively. In this paper we use density functional theory (DFT) in a QM/MM formulation to reconcile these (apparently) conflicting results. By modeling the spectroscopy as well as the underlying reaction mechanism we can show how formation of two isomers (both involving deprotonation of tyrosine) explains the difference in the observed spectroscopic features. Both isomers have a [TyrO–Cu–OH]⁺ moiety with the OH in either the cis- or trans-position to a deprotonated tyrosine. Although the cis-[TyrO–Cu–OH]⁺ moiety is well positioned for oxidation of the substrate, preliminary calculations with the substrate reveal that the reactivity is at best moderate, making a protective role of tyrosine more likely.

With QM/MM, we investigate the mechanism of tyrosine deprotonation in lytic polysaccharide monooxygenases. Our results support deprotonation and our calculated UV-vis spectra show that two isomers must be formed to match recent experiments.     

Spatially resolved imaging of inhomogeneous charge transfer behavior in polymorphous molybdenum oxide. I. Correlation of localized structural, electronic, and chemical properties using conductive probe atomic force microscopy and Raman microprobe spectroscopy

A detailed study of electrochemically deposited molybdenum oxide thin films has been carried out after they were sintered at 250 degrees C. Conductive probe atomic force microscopy (CP-AFM), Raman microscopy, and X-ray photoelectron spectroscopy (XPS) techniques were employed to assess the complex structural, electronic, and compositional properties of these films. Spatially resolved Raman microprobe spectroscopy studies reveal that sintered molybdenum oxide is polymorphous and phase segregated with three types of domains observed comprising orthorhombic alpha-MoO3, monoclinic beta-MoO3, and intermixed alpha-/beta-MoO3. CP-AFM studies conducted in concert with Raman microprobe spectroscopy allowed for correlation between specific compositional regions and localized electronic properties. Single point tunneling spectroscopy studies of chemically distinct regions show semiconducting current-voltage (I-V) behavior with the beta-MoO3 polymorph exhibiting higher electronic conductivity than intermixed alpha-/beta-MoO3 or microcrystalline alpha-MoO3 domains. XPS valence level spectra of beta-MoO3 films display a small structured band near the Fermi level, indicative of an increased concentration of oxygen vacancies. This accounts for the greatly enhanced electronic conductivity of beta-MoO3 as these positively charged cationic defects (anion vacancies) act to trap excess electrons. Connections between structural features, electronic properties, and chemical composition are established and discussed. Importantly, this work highlights the value of using spatially resolved techniques for correlating structural and compositional features with electrochemical behaviors of disordered, mixed-phase lithium insertion oxides.     

Optimisation of Sol-Gel-Derived Silica Films for Optical Oxygen Sensing

Sol-gel-derived silica films were fabricated by dip-coating onto planar and optical fibre substrates. The films were pre-doped with the oxygen-sensitive ruthenium complex [Ru(II)-tris(4,7-diphenyl-1,10-phenanthroline)], whose fluorescence is quenched in the presence of oxygen. The structure and behaviour of sol-gel films is related to the fabrication parameters. In order to optimise the films for oxygen sensing in gaseous and in aqueous media, the quenching behaviour was monitored as a function of dip-speed and water: precursor ratio. By adjusting the above parameters, film properties can be tailored to optimise oxygen quenching in particular concentration ranges and environments.     

A model of the oxygen-evolving center of photosystem II predicted by structural refinement based on EXAFS simulations

A refined computational structural model of the oxygen-evolving complex (OEC) of photosystem II (PSII) is introduced. The model shows that the cuboidal core Mn3CaO4 with a "dangler" Mn ligated to a corner mu4-oxide ion is maximally consistent with the positioning of the amino acids around the metal cluster as characterized by XRD models and high-resolution spectroscopic data, including polarized EXAFS of oriented single crystals and isotropic EXAFS. It is, therefore, natural to expect that the proposed structural model should be particularly useful to establish the structure of the OEC, consistently with high-resolution spectroscopic data, and for elucidating the mechanism of water-splitting in PSII as described by the intermediate oxidation states of the EC along the catalytic cycle.     

Concerted and stepwise proton-coupled electron transfers in aquo/hydroxo complex couples in water: oxidative electrochemistry of [Os(II)(bpy)(2)(py)(OH(2))](2+)

Successive oxidation of transition metal(II) aqua complexes (M(II)OH(2) to M(III)OH) is a domain in which proton-coupled electron transfer reactions are extremely common. The mechanism of these PCET reactions-concerted or stepwise-is an important issue in the understanding and design of natural or artificial systems catalyzing the formation of dioxygen by four-electron oxidation of water. Concerted proton-coupled electron transfer from an aqua metal(II) to a hydroxo metal(III) complex requires the close proximity of a proton-accepting group with a pK value between those of the aqua complexes. Otherwise, stepwise electron-proton or proton-electron pathways involving high-energy intermediates are followed. Concerted proton-electron pathways involving water as proton-acceptor or proton-donor group are inefficient. Cyclic voltammetry of the title complex in buffered aqueous solution and re-examination of previous results for the same complex attached to an electrode surface are used to establish these conclusions, which provide a starting point on the route to higher degrees of oxidation, such as those involved in the catalysis of water oxidation.     

Role of Nanoparticles in Photocatalysis

The aim of this review paper is to give an overview of the development and implications of nanotechnology in photocatalysis. The topics covered include a detailed look at the unique properties of nanoparticles and their relation to photocatalytic properties. Current applications of and research into the use of nanoparticles as photocatalysts has also been reviewed. Also covered is the utilization of nanoparticles in doped, coupled, capped, sensitized and organic–inorganic nanocomposite semiconductor systems, with an effort to enhance photocatalytic and/or optical properties of commonly used semiconductor materials. The use of nanocrystalline thin films in electrochemically assisted photocatalytic processes has been included. Finally, the use of nanoparticles has made a significant contribution in providing definitive mechanistic information regarding the photocatalytic process.