Calculation of positron states in the BEDT-TFF based organic superconductors

Positron states in the BEDT-TTF based organic superconductors, namely -Cu(NCS)₂, -CuCN[N(CN)₂] and -Cu[N(CN)₂]Br salts, have been calculated using the superposedatom model and the numerical relaxation technique. For each salt positrons are distributed predominantly around the anion layers and have a little overlap with the TTF skeleton and the outer S atoms which are responsible for the conductivity.     

The influence of chloro-substituent sites of hexachlorobiphenyl on the respiration of rat liver mitochondria.

The actions of three hexachlorobiphenyls (HCBs) 2,3,4,2',3',4'-, 2,3,4,3',4',5'- and 3,4,5,3',4',5'-HCBs, on the respiration of rat liver mitochondria with succinate as the substrate were compared, and the effect of chloro-substitution sites in HCB on the respiration was examined. 2,3,4,2',3',4'-HCB strongly inhibited both state 3 and 2,4-dinitrophenol (DNP)-stimulated respiration with 50% inhibition dose of 52 and 54 microM for state 3 and DNP-stimulated respiration, respectively. The inhibitory action of 2,3,4,3',4',5'-HCB on both respiration was approximately half as potent as that of 2,3,4,2',3',4'-HCB. On the other hand, 3,4,5,3',4',5'-HCB did not inhibit any respiration at all. These results indicate that both inside (ortho) and outside (meta or para) positions in each phenyl ring of the biphenyl molecule should be replaced with chlorines for HCB to be an effective inhibitor. Either the actual position of chloro-substituent or steric conformation caused by its substitution or both can be considered as factors affecting the inhibition. On the basis of the conformational energy, calculated by AM1 (Austin model 1) method, with increases in chlorine number in ortho position, HCB molecule became angulated. Furthermore, calculated probability of the conformation distribution for HCB indicated that the probability of nonplanarity was higher for effective HCB than for less effective HCB. These structural features suggest the significance of steric conformation as well as chloro-substituent sites in determining the inhibitory ability of HCB.(ABSTRACT TRUNCATED AT 250 WORDS)     

Syntheses and conformational analyses of the perhydrofuro[2,3-b]furan compounds by using lanthanide shift reagent and empirical force-field calculation

1-t-Butyl-7-hydroxyperhydrofuro[2,3-b]furan was synthesized via a furan-alcohol which was derived by a coupling reaction with an epoxide and a new reagent, Li di(3-furyl)cuprate. The configuration of the t-butyl substituent and the conformation of the furo[2,3-b]furan ring were decided by the combination of the LIS experiment and the empirical force-field calculation.     

Synthesis and reactivity of a (mu-1,1-hydroperoxo)(mu-hydroxo)dicopper(II) complex: ligand hydroxylation by a bridging hydroperoxo ligand

A new tetradentate tripodal ligand (L3) containing sterically bulky imidazolyl groups was synthesized, where L3 is tris(1-methyl-2-phenyl-4-imidazolylmethyl)amine. Reaction of a bis(mu-hydroxo)dicopper(II) complex, [Cu2(L3)2(OH)2]2+ (1), with H2O2 in acetonitrile at -40 degrees C generated a (mu-1,1-hydroperoxo)dicopper(II) complex [Cu2(L3)2(OOH)(OH)]2+ (2), which was characterized by various physicochemical measurements including X-ray crystallography. The crystal structure of 2 revealed that the complex cation has a Cu2(mu-1,1-OOH)(mu-OH) core and each copper has a square pyramidal structure having an N3O2 donor set with a weak ligation of a tertiary amine nitrogen in the apex. Consequently, one pendant arm of L3 in 2 is free from coordination, which produces a hydrophobic cavity around the Cu2(mu-1,1-OOH)(mu-OH) core. The hydrophobic cavity is preserved by hydrogen bondings between the hydroperoxide and the imidazole nitrogen of an uncoordinated pendant arm in one side and the hydroxide and the imidazole nitrogen of an uncoordinated pendant arm in the other side. The hydrophobic cavity significantly suppresses the H/D and 16O/18O exchange reactions in 2 compared to that in 1 and stabilizes the Cu2(mu-1,1-OOH)(mu-OH) core against decomposition. Decomposition of 2 in acetonitrile at 0 degrees C proceeded mainly via disproportionation of the hydroperoxo ligand and reduction of 2 to [Cu(L3)]+ by hydroperoxo ligand. In contrast, decomposition of a solid sample of 2 at 60 degrees C gave a complex having a hydroxylated ligand [Cu2(L3)(L3-OH)(OH)2]2+ (2-(L3-OH)) as a main product, where L3-OH is an oxidized ligand in which one of the methylene groups of the pendant arms is hydroxylated. ESI-TOF/MS measurement showed that complex 2-(L3-OH) is stable in acetonitrile at -40 degrees C, whereas warming 2-(L3-OH) at room temperature resulted in the N-dealkylation from L3-OH to give an N-dealkylated ligand, bis(1-methyl-2-phenyl-4-imidazolylmethyl)amine (L2) in approximately 80% yield based on 2, and 1-methyl-2-phenyl-4-formylimidazole (Phim-CHO). Isotope labeling experiments confirmed that the oxygen atom in both L3-OH and Phim-CHO come from OOH. This aliphatic hydroxylation performed by 2 is in marked contrast to the arene hydroxylation reported for some (mu-1,1-hydroperoxo)dicopper(II) complexes with a xylyl linker.     

Efficient intracellular delivery of rifampicin to alveolar macrophages using rifampicin-loaded PLGA microspheres: effects of molecular weight and composition of PLGA on release of rifampicin

Monodispersed PLGA microspheres containing rifampicin (RFP) have been prepared by solvent evaporation method using a Shirasu porous glass (SPG) membrane. The microspheres were spherical and their average diameter was about 2 microm. The loading efficiency of rifampicin was dependent on the molecular weight of PLGA. The higher loading efficiency was obtained by the usage of PLGA with the lower molecular weight, which may be caused by the interaction of the amino groups of rifampicin with the terminal carboxyl groups of PLGA. PLGA with the monomer compositions of 50/50 and 75/25, of lactic acid/glycolic acid, were used in this study. From rifampicin-loaded PLGA microspheres formulated using PLGA with the molecular weight of 20,000, rifampicin was released with almost constant rate for 20 days after the lag phase was observed for the initial 7 days at pH 7.4. On the other hand, from rifampicin-loaded PLGA microspheres formulated using PLGA with the molecular weight of 5000 or 10,000, almost 90% of rifampicin-loaded in the microspheres was released in the initial 10 days. Highly effective delivery of rifampicin to alveolar macrophages was observed by the usage of rifampicin-loaded PLGA microspheres. Almost 19 times higher concentration of rifampicin was found to be incorporated in alveolar macrophages when rifampicin-loaded PLGA microspheres were added to the cell culture medium than when rifampicin solution was added.     

Ring transformation of 5-acylpyrimidines into 4-acylpyrazoles with hydrazine and phenylhydrazine in acidic medium

5-Benzoyl-4-methylpyrimidines 4a,b and 5-acetyl-4-phenylpyrimidines 5a,b reacted with hydrazines in alcoholic acidic medium to give respectively 4-acetyl-3-phenylpyrazoles 7, 9 and 10 and 4-benzoyl-3-methylpyrazoles 6, 8 and 11 . In the reaction with phenylhydrazine, 5-benzoyl-4-methyl-2-methylthiopyrimidine ( 4a ) led exclusively to 4-acetyl-1,3-diphenylpyrazole ( 10 ) as 5-acetyl4-phenyl-2-methylthiopyrimidine ( 5a ) led to 4-benzoyl-3-methyl-1-phenylpyrazole ( 11 ) via the initial formation of phenylhydrazones of pyrimidines 4a and 5a . However, 5-benzoyl-4-methyl-2-phenylpyrimidine ( 4b ) and 5-acetyl-2,4-diphenylpyrimidine ( 5b ) reacted with phenylhydrazine to afford, each of them, a mixture of two isomeric pyrazoles. The mechanism of these ring contraction reactions is discussed.     

Isolation and stereostructures of neocitreoviridinol and epineocitreoviridinol

Both neocitreoviridinol and epineocitreoviridinol with a 2,5-dioxabicyclo[2.2.1]-heptane ring have been isolated as new metabolises of $\text{Penicillium citreo-viride}$ B., and their stereostructures have also been elucidated on the basis of their spectral data coupled with molecular mechanics calculations. In addition, a promising synthetic intermediate for neocitreoviridinol has been made.     

Evaluation of dispersion state of the two racemic compounds of troglitazone in pharmaceutical granules using IR-to-THz imaging

Troglitazone exists as four isomers in equal amount and these isomers compose two racemic compounds, RR/SS and RS/SR. The objective of this study was to discriminate between the racemic compounds and between the crystal and amorphous forms of troglitazone in solid dispersions (SDs) using IR-to-THz imaging. SDs of troglitazone with polyvinylpyrrolidone (PVP, carrier) were prepared by the closed melting method. SDs were heated at various temperatures and water content. The mid-to-far infrared measurements for the powder samples were performed by using the synchrotron radiation source at the BL43IR in SPring-8. Crystalline RR/SS (L) and RS/SR (H) showed different spectra, that is, each form had a specific peak, respectively. However, amorphous forms prepared from each crystalline form exhibited the same spectra. Using the chemo-metric analysis, the existing component was decided in each pixel and the distribution of crystalline L, H and amorphous troglitazone in SDs could be illustrated. For the sample heated at 105 °C, 75%RH, scattered plots of H and amorphous against PVP showed the trend for H was negative; on the other hand, amorphous showed positive correlation. This result suggested that H existed separately, whereas amorphous would be dissolved in PVP. Based on these evaluations, it was clear that the physical state and distribution of troglitazone in SDs, including the discrimination between L, H, and amorphous, reflect the preparation conditions. Chemical imaging can observe a difference in the dispersed state of drug and ingredient in a visible image by performing statistical processing.