Dynamic load and inflation pressure effects on contact pressures of a forestry forwarder tire

A Trelleborg Twin 421 Mark II 600/55-26.5 steel-reinforced bias-ply forwarder drive tire at inflation pressures of 100 and 240 kPa and dynamic loads of 23.9 and 40 kN was used at 5% travel reduction on a firm clay soil. Effects of dynamic load and inflation pressure on soil–tire contact pressures were determined using six pressure transducers mounted on the tire tread. Three were mounted on the face of a lug and three at corresponding locations on the undertread. Contact angles increased with decreases in inflation pressure and increases in dynamic load. Contact pressures on a lug at the edge of the tire increased as dynamic load increased. Mean and peak pressures on the undertread generally were less than those on a lug. The peak pressures on a lug occurred forward of the axle in nearly all combinations of dynamic load, inflation pressure, and pressure sensor location, and peak pressures on the undertread occurred to the rear of the axle in most of the combinations. Ratios of the peak contact pressure to the inflation pressure ranged from 0 at the edge of the undertread for three combinations of dynamic load and inflation pressure to 8.39 for the pressure sensor on a lug, near the tire centerline, when the tire was underinflated. At constant dynamic load, net traction and tractive efficiency decreased as inflation pressure increased.     

Investigation of the surfactant type and concentration effect on the retention factors of glutathione and its analogues by micellar electrokinetic chromatography

In the present study, a micellar electrokinetic chromatographic method was used to determine the retention factors of hydrophilic monomeric and homodimeric forms of glutathione analogues. Ionic‐liquid‐based surfactant, 1‐tetradecyl‐3‐methylimidazolium chloride, as well as cetyltrimethylammonium bromide and phosphate buffer (pH 7.4) were employed in the experiments. Since the studied peptides possess a negative charge under physiological conditions, it is expected that the peptides interact with the oppositely charged 1‐tetradecyl‐3‐methylimidazolium chloride and cetyltrimethylammonium bromide micelles via hydrophobically assisted electrostatic forces. The dependence of the retention factor on the micellar concentration of 1‐tetradecyl‐3‐methylimidazolium chloride and cetyltrimethylammonium bromide is nonlinear and the obtained curves converge to a limiting value. The retention factor values of GSH analogues were in the range of 0.36–2.22 for glutathione analogues and –1.21 to 0.37 for glutathione when 1‐tetradecyl‐3‐methylimidazolium chloride was used. When cetyltrimethylammonium bromide was employed, the retention factor values were in the range of 0.27–2.17 for glutathione analogues and –1.22 to 0.06 for glutathione. If sodium dodecyl sulfate was used, the retention factor values of glutathione analogues with carnosine moiety were in the range of –1.54 to 0.38.     

Synthesis, crystal structure and magnetic properties of the open framework compound Co3Te2O2(PO4)2(OH)4

The new compound Co₃Te₂O₂(PO₄)₂(OH)₄ was synthesized using hydrothermal techniques. It crystallizes in the monoclinic space group C2/m with the unit cell a=19.4317(10) Å, b=6.0249(3) Å, c=4.7788(2) Å, β=103.139(5)°. The crystal structure is an open framework having chains of edge sharing [Co(1)O₆] octahedra. Other building blocks are [TeO₃(OH)₂], [PO₄] and [Co(₂)O₂(OH)₄] connected mainly via corner sharing. The –OH groups protrude into channels in the structure. The magnetic susceptibility measured from 2 to 300 K shows two broad anomalies at around 21 K and 4 K, respectively. The peak at ∼20 K is ascribed to a two-dimensional antiferromagnetic ordering of linear [Co(1)O₆] chains coupled by interchain interaction via [PO₄] groups in the Co(1) sheets. The second transition at 4 K is ascribed to a second antiferromagnetic ordering of the moments of the Co(2) entities via super–super exchange involving [PO₄] and [TeO₃(OH)₂] groups. This assignment is strongly supported by low-temperature heat capacity measurements indicating an entropy removal within the high-temperature transition of about twice the magnitude of the low-temperature transition.     

Multicomponent analysis of drinking water by a voltammetric electronic tongue

A voltammetric electronic tongue is described that was used for multicomponent analysis of drinking water. Measurements were performed on drinking water from a tap and injections of the compounds NaCl, NaN₃, NaHSO₃, ascorbic acid, NaOCl and yeast suspensions could be identified by use of principal component analysis (PCA). A model based on partial least square (PLS) was developed for the simultaneously prediction of identification and concentration of the compounds NaCl, NaHSO₃ and NaOCl. By utilizing this type of non-selective sensor technique for water quality surveillance, it will be feasible to detect a plurality of events without the need of a specific sensor for each type of event.     

Size separations of starch of different botanical origin studied by asymmetrical-flow field-flow fractionation and multiangle light scattering

Asymmetrical-flow field-flow fractionation combined with multiangle light scattering and refractive index detection has been revealed to be a powerful tool for starch characterization. It is based on size separation according to the hydrodynamic diameter of the starch components. Starch from a wide range of different botanical sources were studied, including normal starch and high-amylose and high-amylopectin starch. The starch was dissolved by heat treatment at elevated pressure in a laboratory autoclave. This gave clear solutions with no granular residues. Amylose retrogradation was prevented by using freshly dissolved samples. Programmed cross flow starting at 1.0 mL min(-1) and decreasing exponentially with a half-life of 4 min was utilised. The starches showed two size populations representing mainly amylose and mainly amylopectin with an overlapping region where amylose and amylopectin were possibly co-eluted. Most of the first population had molar masses below 10(6) g mol(-1), and most of the second size population had molar masses above 10(7) g mol(-1). Large differences were found in the relative amounts of the two populations, the molar mass, and hydrodynamic diameters, depending on the plant source and its varieties.     

High-throughput profiling of N-linked oligosaccharides in therapeutic antibodies using a microfluidic CD platform and MALDI-MS

Recombinant therapeutic antibodies have shown a great potential in the treatment of several severe medical conditions such as cancer and autoimmune diseases. Glycosylation plays a critical role in biological activity and immunogenic properties of these compounds. The analysis of glycan profiles is therefore necessary in many steps of the development and manufacturing process from early development to quality control of the final product. In this paper, a fast, parallel, and robust sample preparation platform for glycosylation profiling using a microfluidic compact disc (CD) is presented. A sequential process including selective capture of antibody from a crude cell supernatant using protein A beads, enzymatic release of glycans, purification with a graphitized carbon black column, and crystallisation for MALDI-TOF analysis were performed on the CD. Glycosylation profiles of an antibody intended for therapeutic use produced in two different cell lines were compared.     

A posteriori error estimates for mixed finite element approximations of parabolic problems

We derive residual based a posteriori error estimates for parabolic problems on mixed form solved using Raviart–Thomas–Nedelec finite elements in space and backward Euler in time. The error norm considered is the flux part of the energy, i.e. weighted L ²(Ω) norm integrated over time. In order to get an optimal order bound, an elementwise computable post-processed approximation of the scalar variable needs to be used. This is a common technique used for elliptic problems. The final bound consists of terms, capturing the spatial discretization error and the time discretization error and can be used to drive an adaptive algorithm.     

Chelation-mediated palladium(II)-catalyzed domino Heck-Mizoroki/Suzuki-Miyaura reactions using arylboronic acids: increasing scope and mechanistic understanding

A palladium(II)-catalyzed Heck-Mizoroki/Suzuki-Miyaura domino reaction involving metal coordinating dimethylaminoethyl vinyl ethers and a number of electron-rich and electron-deficient arylboronic acids has been developed. Through variation of the temperature and the concentration of the p-benzoquinone (p-Bq) ligand/reoxidant, conditions for the robust and convenient one-pot generation of diarylated-saturated ethers were identified. With the aid of coordination of the dimethylamino group to the arylpalladium intermediate, the otherwise predominant formation of the β-arylated olefin could be reversed. A reaction route involving a chelation-controlled carbopalladation, providing a p-Bq stabilized six-membered palladacycle, followed by transmetalation and reductive elimination is suggested to explain the selective formation of saturated diarylated ether products.     

Microwave-assisted synthesis of Weinreb and MAP aryl amides via Pd-catalyzed Heck aminocarbonylation using Mo(CO)6 or W(CO)6

A simple and expedient process for the Heck aminocarbonylative synthesis of Weinreb and MAP amide acylating agents, from aryl halides, is reported. This methodology utilizes solid sources of CO making it readily accessible to chemists working in small-scale laboratory applications.