Assessment of nanocomposites based on unsaturated polyester resin/nanoclay under impact loading

The aim of this study is to investigate the performance of nanoclay reinforced unsaturated polyester (UP) resin under impact loads. Nanocomposite specimens containing nanoclay in 0, 1.5, and 3 (wt%) were prepared by melt mixing method. X‐ray diffraction, transmission electron microscopy analysis, scanning electron microscope photographs, and viscosity changes in liquid state resin confirmed exfoliation and intercalation of the nanoclay in the UP resin system used. Tensile modulus showed an increase with increase in nanoclay content. However, the tensile strength and elongation at break exhibited reducing performance with increase in nanoclay content. Izod impact test results indicated better performance for the specimens containing nanoclay reinforcements, with 1.5 (wt%) of nanoclay specimens showing the highest value. High velocity impact tests were carried out using gas gun in velocity range of 20–100 m/sec and harden steel hemispherical tip projectile with diameter of 8.7 mm and weight of 11.54 g. Results for high velocity impact test indicated better performance by the specimens containing nanoclay, with 1.5 (wt%) nanoclay showing the highest attained value. Damage assessments of impact area for all specimens showed spalling type brittle failure with punch out and sever fragmentation pattern. Copyright © 2011 John Wiley & Sons, Ltd.     

Acidified,Wet, Silica-Supported Tetrabutylammonium Periodate: A Convenient and Mild Reagent for Conversion of Thioamides to Their Corresponding Amides Under Solvent-Free Conditions

A series of thioamides are transformed to their corresponding oxo analogues in good to excellent yields with acidified, wet, silica-supported tetrabutylammonium periodate under solvent-free conditions.     

Preparation of an experimental glass-ionomer cements and evaluation of their properties

The preparation of glass-ionomer cements based on the composition of SiO₂–Al₂O₃–CaO–SrO–F and evaluation of their properties is described. Cements were prepared via the sol–gel method and characterized by XRD, BET, SEM, and EDAX analysis. The effect of various concentrations of Sr on in vitro bioactivity of the glass speciments was investigated. In vitro bioactivity of the samples was evaluated by soaking them in simulated body fluid followed by structural characterization using SEM and atomic absorption analysis. A glass specimen with 0.5 mol of Sr exhibited appropriate bioactivity.     

Study of kinetic,thermodynamic, and isotherm of Sr adsorption from aqueous solutions on graphene oxide (GO) and (aminomethyl)phosphonic acid–graphene oxide (AMPA–GO)

Journal of Radioanalytical and Nuclear Chemistry - In this work, graphene oxide (GO) and (aminomethyl)phosphonic acid–Graphene oxide (AMPA–GO) adsorbents were prepared by the modified...     

Kinetics and thermodynamics of uranium ion adsorption from waste solution using Amberjet 1200 H as cation exchanger

The present work deals with the adsorption of uranium from a nitric acid waste solution using the cation exchange resin Amberjet 1200 H (AHR) . Batch experiments were performed in order to assess the performance of AHR in uranium adsorption. The influences of pH, contact time, initial uranium concentration and temperature have been enhanced. The physical parameters including the adsorption kinetics, the isotherm models and the thermodynamic data have also been determined to determine the nature of the uranium adsorption by AHR. The studied resin has been agreed with both the pseudo second order reaction and Langmuir isotherm.     

Polyvinylpolypyrrolidone-bound boron trifluoride (PVPP-BF3); a mild and efficient catalyst for synthesis of 4-metyl coumarins via the Pechmann reaction

Polyvinylpolypyrrolidone-supported boron trifluoride has been studied for synthesis of 4-methyl coumarin by the Pechmann reaction. The reaction proceeded smoothly with hydroxyl phenols and ethyl acetoacetate in good yields in ethanol at reflux conditions. The polyvinylpolypyrrolidone-boron trifluoride complex is a non-corrosive and stable solid catalyst elevated Lewis acid property.     

Preparation and Characterization of Cu2S Nanoparticles Via Ultrasonic Method

This study reports on the synthesis of Cu₂S nanoparticles via an ultrasonic method by employing Na₂SO₃ as a reducing agent. Morphology, structure, and composition of the obtained products were characterized by X-ray diffraction, energy dispersive X-ray analysis, scanning electron microscope and photoluminescence spectroscopy. The effects of time and power of irradiation were studied.     

Embedded passivated-electrode insulator-based dielectrophoresis (EπDEP)

Here, we introduce a new technique called embedded passivated-electrode insulator-based dielectrophoresis (EπDEP) for preconcentration, separation, or enrichment of bioparticles, including living cells. This new method combines traditional electrode-based DEP and insulator-based DEP with the objective of enhancing the electric field strength and capture efficiency within the microfluidic channel while alleviating direct contact between the electrode and the fluid. The EπDEP chip contains embedded electrodes within the microfluidic channel covered by a thin passivation layer of only 4 μm. The channel was designed with two nonaligned vertical columns of insulated microposts (200 μm diameter, 50 μm spacing) located between the electrodes (600 μm wide, 600 μm horizontal spacing) to generate nonuniform electric field lines to concentrate cells while maintaining steady flow in the channel. The performance of the chip was demonstrated using Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacterial pathogens in aqueous media. Trapping efficiencies of 100 % were obtained for both pathogens at an applied AC voltage of 50 V peak-to-peak and flow rates as high as 10 μl/min.